Resource Type
Partner
Serial/Series Title
Degree Department
Country
States
Decade
Month
86 Matching Results
Results open in a new window/tab.
Predicting Hourly Ozone Pollution in Dallas-Fort Worth Area Using Spatio-Temporal Clustering
Presentation for the 2015 GeoComputation Annual Conference. This presentation discusses predicting hourly ozone pollution in the Dallas-Fort Worth area using spatio-temporal clustering.
Date:
May 20, 2015
Creator:
Ahmadi, Mahdi; Huang, Yan & John, Kuruvilla
Object Type:
Presentation
System:
The UNT Digital Library
Scalable Fabrication of Natural-Fiber Reinforced Composites with Electromagnetic Interference Shielding Properties by Incorporating Powdered Activated Carbon
This article discusses preparing Kenaf fiber-polyester composites incorporated with powdered activated carbon (PAC) using the vacuum-assisted resin transfer molding(VARTM) process.
Date:
November 17, 2015
Creator:
Xia, Changlei; Zhang, Shifeng; Ren, Han; Shi, Sheldon Q.; Zhang, Hualiang; Cai, Liping et al.
Object Type:
Article
System:
The UNT Digital Library
Modeling analysis of the impact of anthropogenic emission sources on ozone concentration over selected urban areas in Texas
This article discusses a regional photochemical modeling experiment set up to simulate a high ozone episode of September 11-14, 2002 to evaluate the impact of various anthropogenic emissions sources on ozone concentrations.
Date:
January 6, 2016
Creator:
Farooqui, Zuber M.; John, Kuruvilla; Biswas, Jhumoor & Sule, Neelesh
Object Type:
Article
System:
The UNT Digital Library
Fabrication of Wood-Rubber Composites Using Rubber Compound as a Bonding Agent Instead of Adhesives
This article describes fabricating wood-rubber composites using rubber processing to improve water resistance and mechanical properties.
Date:
June 14, 2016
Creator:
Shao, Dongwei; Xu, Min; Cai, Liping & Shi, Sheldon Q.
Object Type:
Article
System:
The UNT Digital Library
Effects of Carbonization Temperature and Component Ratio on Electromagnetic Interference Shielding Effectiveness of Woodceramics
This article explores the effects of carbonization temperature and mass ratio of wood/resin on electromagnetic interference, shielding effectiveness, and morphology of woodceramics.
Date:
July 2, 2016
Creator:
Tao, Yubo; Li, Peng & Shi, Sheldon Q.
Object Type:
Article
System:
The UNT Digital Library
Hybrid Boron Nitride-Natural Fiber Composites for Enhanced Thermal Conductivity
This article finds that the synergy of natural fiber with hexagonal boron nitride (hBN) could significantly improve thermal conductivity, compared with that solely using hBN.
Date:
October 5, 2016
Creator:
Xia, Changlei; Garcia, Andres C.; Shi, Sheldon Q.; Qiu, Ying; Warner, Nathaniel; Wu, Yingji et al.
Object Type:
Article
System:
The UNT Digital Library
Three-Dimensional Carbon Nanostructures for Advanced Lithium-Ion Batteries
This review contains the authors' recent progress on the design and fabrication of 3D carbon nanostructures, their performance in Li-ion batteries (LIBs), and their implementation into large-scale, lightweight, and flexible LIBs.
Date:
October 26, 2016
Creator:
Kang, Chiwon; Cha, Eunho; Patel, Mumukshu D.; Wu, H. Felix & Choi, Wonbong
Object Type:
Review
System:
The UNT Digital Library
Competition Between Resonant Plasmonic Coupling and Electrostatic Interaction in Reduced Graphene Oxide Quantum Dots
This article presents a study of the plasmonic interaction that effects the optical properties of light emission from graphene oxide system.
Date:
November 22, 2016
Creator:
Karna, Sanjya; Mahat, M.; Choi, Tae-Youl; Shimada, Ryoko; Wang, Zhiming & Neogi, Arup
Object Type:
Article
System:
The UNT Digital Library
Porositization Process of Carbon or Carbonaceous Materials
Patent relating to porositized carbon processed from carbon or carbonaceous materials.
Date:
March 14, 2014
Creator:
Shi, Sheldon Q. & Xia, Changlei
Object Type:
Patent
System:
The UNT Digital Library
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
This article presents the development of wood flour (WF)-filled polylactic acid (PLA) composite filaments for a fused deposition modeling (FDM) process with the aim of application to 3D printing.
Date:
March 24, 2017
Creator:
Tao, Yubo; Wang, Honglei; Li, Zelong; Li, Peng & Shi, Sheldon Q.
Object Type:
Article
System:
The UNT Digital Library
Combined effects of ZnO particle deposition and heat treatment on dimensional stability and mechanical properties of poplar wood
This article proposes a one-step wood modification method by combining the deposition of ZnO particles on wood surface and heat treatment.
Date:
May 24, 2017
Creator:
Cui, Wei; Zhang, Nannan; Xu, Min & Cai, Liping
Object Type:
Article
System:
The UNT Digital Library
Technology Development of Glycosyl Resins for Wood Composites
This article reviews synthesis methods for renewable and eco-friendly glycosyl adhesives.
Date:
September 15, 2017
Creator:
Gan, Wei-Xing; Yang, Hai-Bing; Zhang, Yi-Fu; Zhang, Yi-Fu & Shi, Sheldon Q.
Object Type:
Article
System:
The UNT Digital Library
Interfacial Properties of Bamboo Fiber-Reinforced High-Density Polyethylene Composites by Different Methods for Adding Nano Calcium Carbonate
This article describes a study observing the effect of nano calcium carbonate (CaCO₃) modification methods on bamboo fiber (BF) used in BF-reinforced high-density polyethylene composites manufactured by extrusion molding.
Date:
October 11, 2017
Creator:
Wang, Cuicui; Xian, Yu; Smith, Lee M.; Wang, Ge; Cheng, Haitao & Zhang, Shuangbao
Object Type:
Article
System:
The UNT Digital Library
Durable, High Conductivity, Superhydrophobicity Bamboo Timber Surface for Nanoimprint Stamps
This article discusses the fabrication of superhydrophobic bamboo timber by magnetron sputtering and nanoimprint stamps. It was expected that this work could promote the applications of superhydrophobic and conductive bamboo products.
Date:
December 6, 2017
Creator:
Bao, Wenhui; Liang, Daxin; Zhang, Ming; Jiao, Yue; Wang, Lijuan; Cai, Liping et al.
Object Type:
Article
System:
The UNT Digital Library
In Situ Fabrication of a Graphene-Coated Threedimensional Nickel Oxide Anode for High-Capacity Lithium-Ion Batteries
This article discusses the development of an in situ fabrication of a graphene-coated, three-dimensional (3D) NiO-Ni structure by simple chemical vapor deposition (CVD).
Date:
October 5, 2017
Creator:
Kang, Chiwon; Cha, Eunho; Lee, Sang Hyub & Choi, Wonbong
Object Type:
Article
System:
The UNT Digital Library
Effect of light-delignification on mechanical, hydrophobic, and thermal properties of high-strength molded fiber materials
This article discusses the development of a high-strength molded fiber material using pulp fibers, which coudl be a good substitute for plastic and solid wood materials.
Date:
July 20, 2017
Creator:
Wang, Quanliang; Xiao, Shengling; Shi, Sheldon Q. & Cai, Liping
Object Type:
Article
System:
The UNT Digital Library
Feasibility Study of Compaction and Sintering of Commercially Pure Titanium using Friction Stir Processing
This article explores the possibility of decreasing the number of steps required in the manufacturing of a product using the powder metallurgy technique.
Date:
May 22, 2018
Creator:
Fortier, Aleksandra; Kumar, Nilesh; Komarasamy, Mageshwari & Mishra, Rajiv
Object Type:
Article
System:
The UNT Digital Library
Metal Matrix Composite Coatings of Cupronickel Embedded with Nanoplatelets for Improved Corrosion Resistant Properties
This article studies the effects of nanoplatelet reinforcement on the durability, corrosion resistance, and mechanical properties of copper-nickel coatings.
Date:
June 3, 2018
Creator:
Thurber, Casey; Ahmad, Yahia H.; Calhoun, Margaret C.; Al-Shenawa, Amaal; D'Souza, Nandika; Mohamed, Adel M. A. et al.
Object Type:
Article
System:
The UNT Digital Library
Research Progress on Formaldehyde Emission of Wood-Based Panel
This article explores current research progress on the mechanism and influencing factors of formaldehyde emission from wood-based panel. The research provides technical support to improve interior decoration and furniture design.
Date:
July 22, 2018
Creator:
Zhang, Jijuan; Song, Feifei; Tao, Jing; Zhang, Zhongfeng & Shi, Sheldon
Object Type:
Article
System:
The UNT Digital Library
Characterization and Research on Mechanical Properties of Bamboo Plastic Composites
This article observes the mechanical properties of bamboo plastic composites (BPCs) with bamboo pulp fiber (BPF) or white mud (WM).
Date:
July 1, 2018
Creator:
Xian, Yu; Ma, Dongjuan; Wang, Cuicui; Wang, Ge; Smith, Lee M. & Cheng, Haitao
Object Type:
Article
System:
The UNT Digital Library
Characterization and Research on Mechanical Properties of Bamboo Plastic Composites
This article describes a study to observe the mechanical properties of bamboo plastic composites with bamboo pulp fiber or white mud.
Date:
July 25, 2018
Creator:
Xian, Yu; Ma, Dongjuan; Wang, Cuicui; Wang, Ge; Smith, Lee M. & Cheng, Haitao
Object Type:
Article
System:
The UNT Digital Library
Photo-Magnetic Irradiation-Mediated Multimodal Therapy of Neuroblastoma Cells Using a Cluster of Multifunctional Nanostructures
This article implements a safer and alternative multimodal therapeutic strategy involving simultaneous optical and oscillating (AC) magnetic field stimulation of a multifunctional nanocarrier system to guide neuroblastoma cell destruction.
Date:
September 29, 2018
Creator:
Atluri, Rohini; Atmaramani, Rahul; Tharaka, Gamage; McCallister, Thomas; Peng, Jian; Diercks, David et al.
Object Type:
Article
System:
The UNT Digital Library
Mechanical, Thermal, and Shape Memory Properties of Three-Dimensional Printing Biomass Composites
This article studies studies the preparation of a series of heat-induced shape memory composites by the hot-melt extrusion and three-dimensional (3D) printing of thermoplastic polyurethane (TPU) using wood flour (WF) with different contents of EPDM-g-MAH.
Date:
October 4, 2018
Creator:
Bi, Hongjie; Xu, Min; Ye, Gaoyuan; Guo, Rui; Cai, Liping & Ren, Zechun
Object Type:
Article
System:
The UNT Digital Library
Sodium Hydroxide-Free Soy Protein Isolate-Based Films Crosslinked by Pentaerythritol Glycidyl Ether
This article examines the chemical structures of biodegradable films created out of soy protein isolate (SPI), sodium dodecylbenzenesulfonate (SDBS) and pentaerythritol glycidyl ether (PEGE). The thermal stabilities of the films were also examined by means of the thermo-gravimetric analysis.
Date:
October 19, 2018
Creator:
Wu, Yingji; Cai, Liping; Wang, Chen; Mei, Changtong & Shi, Sheldon
Object Type:
Article
System:
The UNT Digital Library