Resource Type
Partner
Collection
Degree Department
Country
States
Month
292 Matching Results
Results open in a new window/tab.
Effect of Ni-Content on the Transformation Temperatures in NiTi-20 at. % Zr High Temperature Shape Memory Alloys
This article investigates the effect of Ni-content on phase transformation behavior of NiTi-20 at. % Zr high temperature shape memory alloy.
Date:
October 18, 2017
Creator:
Carl, Matthew; Smith, Jesse D.; Van Doren, Brian & Young, Marcus L.
Object Type:
Article
System:
The UNT Digital Library
Activation Volume and Energy for Dislocation Nucleation in Multi-Principal Element Alloys
Paper describes study evaluating incipient plasticity in multi-principal element alloys, CoCrNi, CoCrFeMnNi, and Al0.1CoCrFeNi by nano-indentation and compared with pure Ni.
Date:
February 23, 2019
Creator:
Mridha, Sanghita; Sadeghilaridjani, Maryam & Mukherjee, Sundeep
Object Type:
Article
System:
The UNT Digital Library
Point-by-Point Compositional Analysis for Atom Probe Tomography
This article demonstrates a new alternate approach to data processing for analyses that traditionally employed grid-based counting methods, as demonstrated using an atom-probe analysis of a Ni-based super-alloy.
Date:
March 5, 2014
Creator:
Stephenson, Leigh T.; Ceguerra, Anna V.; Li, Tong; Rojhirunsakool, Tanaporn; Nag, Soumya; Banerjee, Rajarshi et al.
Object Type:
Article
System:
The UNT Digital Library
Exceptional Friction Mitigation via Subsurface Plastic Shear in Defective Nanocrystalline Ceramics
This article reports that atomic layer deposition {0002}-textured ZnO films, with nanocolumnar grains and defective sub-stoichiometric structure, exhibit nanocrystalline plasticity and exceptionally low sliding friction and wear.
Date:
June 13, 2014
Creator:
Mohseni, Hamidreza; Mensah, B. A.; Gupta, N.; Srinivasan, S. G. & Scharf, Thomas W.
Object Type:
Article
System:
The UNT Digital Library
Nanopatterned Graphene Field Effect Transistor Fabricated Using Block Co-polymer Lithography
This article demonstrates a successful fabrication of Nanopatterened Graphene (NPG) using a PS-b-P4VP polymer.
Date:
January 9, 2014
Creator:
Choi, Duyoung; Kuru, Cihan; Choi, Chulmin; Noh, Kunbae; Hong, Soon-Kook; Das, Santanu et al.
Object Type:
Article
System:
The UNT Digital Library
Polymorphic nature of {332} 〈 113 〉 twinning mode in BCC alloys
Article using ab initio calculations and experimental observations to show that {332}<113> twinning can be described as a polymorphic solid-state transformation able to produce either twinned or martensitic structures with a unified transformation path.
Date:
March 17, 2022
Creator:
Kwasniak, P.; Sun, F.; Mantri, Srinivas Aditya; Banerjee, Rajarshi & Prima, Frederic
Object Type:
Article
System:
The UNT Digital Library
Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed A₁₀.₁CoCrFeNi High Entropy Alloy
This article reports grain refinement using friction stir processing and a detailed study on the microstructural evolution at various locations in the processed region using scanning electron microscopy, in addition to the effect of grain refinement on the tensile properties and the underlying deformation mechanisms in both coarse-grained and fine-grained materials.
Date:
August 7, 2014
Creator:
Komarasamy, Mageshwari; Kumar, N.; Tang, Z.; Mishra, Rajiv & Liaw, P.K.
Object Type:
Article
System:
The UNT Digital Library
Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging
This article demonstrates that low-temperature aging (LTA) treatments for short time periods can in fact enhance the yield strength while preserving substantial elongation-to-failure in ω containing β titanium alloys.
Date:
July 13, 2017
Creator:
Sun, F.; Zhang, J.Y.; Vermaut, P.; Choudhuri, Deep; Alam, Talukder; Mantri, Srinivas Aditya et al.
Object Type:
Article
System:
The UNT Digital Library
A Review of Diagnostics Methodologies for Metal Additive Manufacturing Processes and Products
This article is a review summarizing and discussing various ex-situ inspections and in-situ monitoring methods, including electron-based methods, thermal methods, acoustic methods, laser breakdown, and mechanical methods, for metal additive manufacturing.
Date:
August 30, 2021
Creator:
Yang, Teng; Mazumder, Sangram; Jin, Yuqi; Squires, Brian; Sofield, Matthew; Pantawane, Mangesh V. et al.
Object Type:
Article
System:
The UNT Digital Library
Preparation and Characterization of Injectable Brushite Filled-Poly (Methyl Methacrylate) Bone Cement
This article discusses the design of an alternative cement system that can better accommodate calcium-phosphate additives while preserving cement rheological properties and performance.
Date:
September 19, 2014
Creator:
Rodriguez, Lucas C.; Chari, Jonathan; Aghyarian, Shant; Gindri, Izabelle M.; Kosmopoulos, Victor & Rodrigues, Danieli C.
Object Type:
Article
System:
The UNT Digital Library
Effect of Substrate Support on Dynamic Graphene/Metal Electrical Contacts
This article investigates the stability of dynamic electrical contacts at a graphene/metal interface using atomic force microscopy (AFM), under static conditions with variable normal loads and under sliding conditions with variable speeds.
Date:
March 22, 2018
Creator:
Lee, Jihyung; Hu, Xiaoli; Voevodin, Andrey A.; Martini, Ashlie & Berman, Diana
Object Type:
Article
System:
The UNT Digital Library
Durability of Portland Concrete Containing Polymeric Fillers and Fly Ash
Article explores degradation of Portland concrete and finds that the combination of fly ash with polymers provides significantly improved properties.
Date:
January 2, 2020
Creator:
Brostow, Witold, 1934-; Chetuya, Nonso; Hong, Hee Jae; Gencel, Osman; Menard, Noah & Sayana, Susmitha
Object Type:
Article
System:
The UNT Digital Library
Additive friction stir deposition: a deformation processing route to metal additive manufacturing
This article outlines key advantages of additive friction stir deposition, e.g. rendering fully-dense material in the as-printed state with fine, equiaxed microstructures, identifies its niche engineering uses, and points out future research needs in process physics and materials innovation.
Date:
November 24, 2020
Creator:
Yu, Hang Z. & Mishra, Rajiv
Object Type:
Article
System:
The UNT Digital Library
Ordering-mediated local nano-clustering results in unusually large Hall-Petch strengthening coefficients in high entropy alloys
This article reports a dramatic increase in the grain boundary strengthening or Hall-Petch coefficient, K, by systematically investigating the effect of Al addition on tensile yield strength in CoFeNi and CoCrFeNi high entropy alloys (HEAs) or complex concentrated alloys (CCAs). Such a trend is attributed to the ordering mediated nano-clustering in Al containing HEA/CCAs.
Date:
January 23, 2021
Creator:
Jagetia, Abhinav; Nartu, M. S. K. K. Y.; Dasari, S.; Sharma, A.; Gwalani, Bharat & Banerjee, Rajarshi
Object Type:
Article
System:
The UNT Digital Library
Properties of lightweight concrete blocks with waste zeolitic tuff
Article presents an alternative block wall with Bayburt stone (BS) containing zeolite, namely lightweight concrete masonry blocks (LCMBs).
Date:
August 17, 2020
Creator:
Osmanson, Allison T.; Brostow, Witold, 1934-; Tekin, Ilker; Kotan, Turkay; Gencel, Osman & Martínez-Barrera, Gonzalo
Object Type:
Article
System:
The UNT Digital Library
Achieving extraordinary structural efficiency in a wrought magnesium rare earth alloy
Article describes development of an ultrafine-grained magnesium alloy with an extraordinary strength and ductility combination, exceptional high specific strength, zero yield strength asymmetry and excellent high strain rate superplasticity.
Date:
January 29, 2020
Creator:
Panigrahi, S. K.; Mishra, Rajiv; Brennan, R.C. & Cho, K. C.
Object Type:
Article
System:
The UNT Digital Library
Physical and Mechanical Properties of Polymer Composites with High Content of Wastes Including Boron
Article describes study examining the physical and mechanical properties of polymer composite with wastes that incorporate boron.
Date:
December 4, 2015
Creator:
Uygunoglua, Tayfun; Gunes, Ibrahim & Brostow, Witold, 1934-
Object Type:
Article
System:
The UNT Digital Library
Microstructure and surface texture driven improvement in in-vitro response of laser surface processed AZ31B magnesium alloy
This article explores the effects of laser surface melting on microstructure and surface topography evolution in AZ31B magnesium alloy.
Date:
January 19, 2021
Creator:
Wu, Tso-Chang; Joshi, Sameehan; Ho, Yee-Hsien; Pantawane, Mangesh V.; Sinha, Subhasis & Dahotre, Narendra B.
Object Type:
Article
System:
The UNT Digital Library
Effect of Cr Addition on γ-γ' Cobalt-Based Co-Mo-Al-Ta Class of Superalloys: A Combined Experimental and Computational Study
This article deals with effect of Cr addition (10 at.%) on the partitioning behavior and the consequent effect on mechanical properties for tungsten-free γ-γ' cobalt-based superalloys with base alloy compositions of Co–30Ni–10Al–5Mo–2Ta (2Ta) and Co–30Ni–10Al–5Mo–2Ta–2Ti (2Ta2Ti).
Date:
June 12, 2017
Creator:
Nithin, B.; Samanta, A.; Makineni, S. K.; Alam, Talukder; Pandey, P.; Singh, Abhishek K. et al.
Object Type:
Article
System:
The UNT Digital Library
Additive friction stir deposition of AZ31B magnesium alloy
Article explores additive friction stir deposition of AZ31B magnesium alloy with the aid of MELD® technology.
Date:
May 3, 2022
Creator:
Joshi, Sameehan; Patil, Shreyash M.; Mazumder, Sangram; Sharma, Shashank; Riley, Daniel A.; Dowden, Shelden et al.
Object Type:
Article
System:
The UNT Digital Library
Sc3N@C80 and La@C82 doped graphene for a new class of optoelectronic devices
This is the Author Manuscript version of an article presenting high-performance hybrid graphene photodetectors prepared with endohedral fullerenes deposited on graphene using electrophoretic methods for the first time.
Date:
December 19, 2019
Creator:
Jayanand, Kishan; Min, Misook; Chugh, Srishti; Kaul, Anupama; Adhikari, Nirmal & Echegoyen, Luis
Object Type:
Article
System:
The UNT Digital Library
Influence of Silanization Treatment on Thermomechanical Properties of Multiwalled Carbon Nanotubes: Poly(methylmethacrylate) Nanocomposites
This article reports results for functionalized as well as unfunctionalized carbon nanotube polymer composites.
Date:
July 30, 2011
Creator:
Velasco-Santos, Carlos; Martinez-Hernandez, Ana Laura; Brostow, Witold, 1934- & Castaño, Victor M.
Object Type:
Article
System:
The UNT Digital Library
Self-Assembly Techniques for Nanofabrication
Article introduces a special issue of the Journal of Nanomaterials that addresses the research studies on fabrication, processing, and applications of self-assembled nanostructures.
Date:
December 24, 2013
Creator:
Kajbafvala, Amir; Bahmanpour, Hamed; Maneshian, Mohammad H. & Li, Minghang
Object Type:
Article
System:
The UNT Digital Library
Atomic Distribution in Catalytic Amorphus Metals
This article investigates the atomic distribution in catalytically active metallic glass alloys using three-dimensional atom probe microscopy.
Date:
November 24, 2015
Creator:
Mridha, Sanghita; Jaeger, David L.; Singh Arora, Harpreet; Banerjee, Rajarshi & Mukherjee, Sundeep
Object Type:
Article
System:
The UNT Digital Library