Article describes how high energy synchrotron X-ray diffraction was used during tensile testing of an as-cast eutectic AlCoCrFeNi2.1 high entropy alloy. The authors determine for the first time the volume fractions of existing phases, and they further detail their role on the alloy deformation behavior.

Article describes how in recent years, high entropy alloys (HEAs) have been shown to be promising alternatives to common engineering alloys, depending on their composition and thermomechanical processing. In the present work, Gas Tungsten Arc Welding (GTAW) was used to achieve defect-free joints based on a novel transformation induced plasticity (TRIP) Fe50Mn30Co10Cr10 HEA.

Data management plan for the grant, "In-Situ Monitoring for Quality Assurance and Machine Learning in Direct-Write Additive Manufacturing of 5G RF Electronic Ceramics."

Authors of the article state that in the first step of their experiment, the sorption was investigated using La(III) ions before testing for the recovery of rare earth elements (REEs) from pretreated industrial acidic leachate. They infer that phosphonate groups participate in the sorption, and that the most effective sorption is at pH = 4.

Article asserts that x-ray Microtomography is a proven tool for phase fraction analysis of multi-phase systems, provided that each phase is adequately partitioned by some means of data processing. The authors present a novel, combined methodology for accurate porosity analysis—despite these shortcomings.

Article contains a study that combined multiscale nanomechanical and microstructural mapping to illustrate mechanical signatures associated with hierarchical heat distribution and rapid solidification of laser-powder bed fusion additive manufacturing (L-PBFAM). The presented approach serves as a high throughput methodology to establish the chemistry-processing-microstructure-properties correlation of newly designed alloys for L-PBFAM.

Article describes the compositional dependence and influence of relaxation state on the deformation behavior of a Pt–Pd-based bulk metallic glasses model system was investigated, where platinum is systematically replaced by topologically equivalent palladium atoms. Based on total scattering experiments with synchrotron X-ray radiation, a correlation between the increase in stiffer 3-atom cluster connections and reduction in strain-rate sensitivity, as a measure of ductility, with Pd content and thermal history is suggested.

Article explores solid-state additive manufacturing of AZ31B-Mg alloy using additive friction stir deposition. Spatial and temporal evolution of temperature during additive friction stir deposition was predicted using multi-layer computational process model.

Article discusses how, in this paper, Inconel 718 (IN718) superalloy was processed by laser powder-bed fusion additive manufacturing (L-PBFAM), followed by heat treatment. Evidence of extensive deformation of twin networks and dislocation cells was revealed by transmission electron microscopy of the deformed region under the nanoindentation tip.

Article describes how Li-CO2 batteries with a theoretical energy density of 1,876 Wh kg−1 are attractive as a promising energy storage strategy and as an effective way to reduce greenhouse gas emissions by CO2 reduction and the formation of discharge product Li2CO3 and carbon. This article provides critical perspectives on the development of Li-CO2 batteries as well as a description of current issues and challenges associated with cathode catalysts, electrolyte, and anode for Li-CO2 batteries.

Article states that thiol-ene/acrylate shape memory polymers (SMPs) have sufficient stiffness for facile insertion and precision placement and soften after exposure to physiological conditions to reduce the mechanical mismatch with body tissue; as a result, they have demonstrated excellent potential as substrates for various flexible bioelectronic devices, such as cochlear implants, nerve cuffs, cortical probes, plexus blankets, and spinal cord stimulators. Here, the authors report a new strategy for designing SMPs with enhanced shape recovery properties and lower moduli than previously reported SMPs under physiological conditions without sacrificing stiffness at room temperature by introducing a hydrophilic monomer.

Article states that predicting the chemical durability of glass materials is important for various applications from daily life such as cell phone screens and kitchenware to advanced technologies such as nuclear waste disposal and biomedicine. In this work, we explored the prediction of the initial glass dissolution rates using structural features from molecular dynamics (MD) simulations for a series of glass compositions (total 28), including ZrO2- and V2O5-containing boroaluminosilicate, borosilicate, and aluminosilicate glasses.

Article describes how additive friction stir deposition has been proposed as a disruptive manufacturing process; involving complex thermo-mechanical mechanisms during multilayer material deposition. The primary motivation for development of the model was to seek an understanding of thermo-mechanical mechanisms and their impact on microstructural evolution during additive friction stir deposition.

Data management plan for the grant, "Research Training Pathway for Underrepresented Minority Students in Advancing Materials and Manufacturing for Fusion Power."

Data management plan for the grant, "Protective Thermal Electro-Chromic Coatings (ProTECC) for Lunar Exploration."

Data management plan for the grant, "CAREER: Understanding the Role of Nanoprecipitates in Advanced Metastable Titanium Alloys."

Data management plan for the grant, "CAN23-161, Hierarchically structured ISRU derived composites."

Article states that perovskite solar cells (PSCs), particularly based on the methyl ammonium lead iodide (MAPbI3) formulation, have been of intense interest for the past decade within the photovoltaics (PV) community, but their long-term stability under operational conditions and environmental storage are still prime challenges to be overcome towards their commercialization. The authors have conducted a comprehensive analysis on the impact of the electrode collector layer, specifically Ag and Au, on the degradation mechanism associated with the MAPbI3 and a triple cation absorber. The authors hypothesize the mechanism of degradation, arising from the Ag interaction with the absorber through the formation of AgI in the PSCs, leads to corrosion of the perovskite absorber, as opposed to the benign AuI when Au electrodes are used in the solar cell stack.

Article describes how authors use state-of-the-art electron microscopy techniques to show that the magnetization reversal process in an Al0.3CoFeNi magnetic complex concentrated alloy (CCA), which is responsible for its coercivity, changes dramatically from a nucleation-type mechanism in the FCC+L12 state of the CCA. Their work reveals that heterophase FCC/BCC interfaces have a much stronger effect on coercivity than isostructural chemically ordered/disordered interfaces and provides a powerful guide to the rational design of microstructure to tune magnetic properties in both complex concentrated alloys and conventional magnetic alloys.

Article talks about how while the idea of frictionless surfaces and the associated implications of vanishing energy losses during mechanical motion have been part of science fiction culture, scientists in the real world work toward realizing this ambitious goal that was once thought to be unattainable. The overarching goal of the research topic titled “Superlubricity Across the Scales” is to provide a snapshot of the latest developments in this rapidly accelerating field of research.

Article describes how processes including hot compression, cold compression and subsequent annealing on the structures and properties are investigated and compared. They found that applying pressure up to 10 GPa at the glass transition temperature led to permanent densifications and a dramatic increase of elastic moduli by 90%, while thermal annealing reversed the increase and applying pressure at ambient temperature did not increase the modulus.

Article states that the AlCoCrFeNi2.1 eutectic high entropy alloy is of great interest due to its unique mechanical properties combining both high strength and plasticity. This work establishes the potential for using arc-based welding for joining eutectic high entropy alloys.

Article asserts that weldability studies on high entropy alloys are still relatively scarce, delaying the deployment of these materials into real-life applications, thus, there is an urgent need for in-depth studies of the weldability of these novel advanced engineering alloys. In the current work, an as-cast Fe42Mn28Co10Cr15Si5 metastable high entropy alloy was welded for the first time using gas tungsten arc welding.

Article explores the possibility of using friction stir welding (FSW) to join jacket web sections of two nitrogen-containing stainless steels for housing internally cooled superconducting cables which are utilized to generate magnetic fields in tokamak type fusion reactor systems. It has been shown that the FSW fabricated SS 316 LN jackets possessed the required strength and magnetic properties critical to this application.