Article on the implementation of liquid exfoliation to inkjet-print two-dimensional (2D) black phosphorous (BP) and molybdenum disulfide (MoS₂) p–n heterojunctions on a standard indium tin oxide (ITO) glass substrate in a vertical architecture. The authors also compared the optical and electrical properties of the inkjet-printed BP layer with that of the MoS₂ and the electrical properties of the mechanically exfoliated MoS₂ with that of the inkjet-printed MoS₂.

This article aims to determine the nucleation and growth mechanisms of PbSO4 nanoparticles in various solutions to potentially reduce or control the buildup of PbSO4 on battery electrodes over time.

This article discusses molecular dynamics simulations performed to present evidence that silica structure in both short and medium ranges is directly modified by UV-induced defects.

This article investigates twist grain boundaries with molecular dynamic simulations to reveal their atomic structures, energy and interactions with dislocations.

Article reporting a scenario where a translucent Er3+−Yb3+ doped oxyfluoride precursor glass-ceramic (P-GC) becomes transparent with increasing crystal size and crystallinity.

Article demonstrates direct evidence of Fe3+ and Fe2+ gradient distribution across mussel byssal cuticle threads thickness, which shows more Fe2+ inside the inner cuticle, to support the hypothesis that the cuticle is a functionally graded material with high stiffness, extensibility, and self‐healing capacity.

Article describes precession electron diffraction (PED), which makes possible the very accurate and automated quantitative characterization of technically interesting materials that historically have been difficult to analyze due to their dimensions and/or degree of deformation, including specifically ultrafine-grained metallic structures with high dislocation densities.

Article describes experiment where researchers synthesized a PEGylated isoniazid (PEG-g-INH or PEG–INH) by gamma radiation-induced polymerization for the first time.

This article discusses the preparation of thermal-remolded membrane scaffolds from poly(3-hydroxybutyrate) grafted with 2-amino-ehtyl methacrylate hydrochloride.

Article using preferential solubility of a polymer in supercritical CO2 to develop a new architecture using biocompatible polymers based on porous core-sheath fiber fabrication technique.

An introduction to a series of research articles submitted on the topic of "Catalysts for Clean Energy Conversion and Storage".

The article reports on the shear deformation of a eutectic structured HEA and effect of precipitation on shear deformation, particularly Al₀.₇CoCrFeNi high-entropy alloy (HEA). A split-Hopkinson pressure bar (SHPB) was used to compress the hat-shaped specimens to study the local dynamic shear response of the alloy. The change in the width of shear bands with respect to precipitation and deformation rates was studied. The precipitation of L1₂ phase did not delay the formation of adiabatic shear bands (ASB) or affect the ASB width significantly, however, the deformed region around ASB, consisting of high density of twins in fcc phase, was reduced from 80 µm to 20 µm in the stronger precipitation strengthened condition.

This article reports the fabrication of nanocrystalline (NC) Al₀.₁CoCrFeNi high entropy alloy and subsequent small-scale plastic deformation behavior via nano-pillar compression tests.

In this article the time-dependent plastic deformation behavior of two refractory high entropy alloys was investigated, namely HfTaTiVZr and TaTiVWZr. These alloys are based on reduced activity metals from the 4-5-6 elemental palette that would allow easy post-service recycling after use in nuclear reactors. The creep behavior was investigated using nano-indentation over the temperature range of 298 K to 573 K under static and dynamic loads up to 5 N.

Article reporting the high-temperature superlubricity phenomenon accomplished in coatings produced by burnishing powders of antimony trioxide (Sb₂O₃) and magnesium silicate hydroxide coated with carbon (MSH/C) onto the nickel superalloy substrate.

Article covers the emerging trends of pharmacologic therapies for osteoarthritis (OA) such as traditional OA drugs (acetaminophen, non-steroidal anti-inflammatory drugs (NSAIDs), opioids, serotonin-norepinephrine reuptake inhibitors (SNRIs), intra-articular injections of corticosteroids, and dietary supplements), which are effective in pain relief but not in reversing damage, and are frequently associated with adverse events.

Article describes experiment in which liquid Al2O3 was supercooled more than 500 K below its melting point (Tm = 2,327 K) using aerodynamic levitation and laser heating techniques.

This article explores the role of various geometrical and structural (length, diameter, chirality) as well as external (deformation and strain) carbon nanotube (CNT) parameters to estimate total as well as area-normalized thermal conductance across cross-contact interconnects.

Article describes study in which the density functional theory (DFT) methods were applied to understand the inferior performance of doped graphene in acid.

Article provides an overview of recent progress in superlubricity research involving solid, liquid, and gaseous media and discuss the prospects for achieving superlubricity in engineering applications leading to greater efficiency, durability, environmental quality, and hence global sustainability.

This article discusses the study of two interfaces– {112}β1/{1100}Mg and {111}β1/{1120}Mg– that are commensurate with β1/hcp-Mg orientation relationship via first principles calculations.

This article examines a rivet from the SS "John W. Brown", which was assembled in Baltimore, Maryland, and launched in September 1942. Classical metallurgical analysis of a rivet from the original 1942 vessel is compared with modern rivets used during its restoration.

This article reviews approaches for improvement of tribological properties of polymers based on inclusion of fillers.

This article combines machine learning (ML), finite element analysis (FEA), and empirical experiments to develop data-driven models that characterize interfacial mechanical properties precisely. It also provides a code package containing trained ML models, allowing other researchers to establish T–S relations for different material interfaces.