This article demonstrates a facile single-step processing route for the development of bimodal grain structure in austenitic stainless steel, SS316L.

Article provides an equation relating the linear isobaric expansivity to the brittleness B for a number of polymers with a large variety of chemical structures and consequently with a large variety of properties.

Paper describes study evaluating incipient plasticity in multi-principal element alloys, CoCrNi, CoCrFeMnNi, and Al0.1CoCrFeNi by nano-indentation and compared with pure Ni.

Article describes experiment in which liquid Al2O3 was supercooled more than 500 K below its melting point (Tm = 2,327 K) using aerodynamic levitation and laser heating techniques.

This article presents physical property data (both published and previously unpublished) on a single batch of International Simple Glass (ISG), which was cast into individual ingots that were distributed to the collaborators. Properties from the atomic scale to the macroscale, including composition and elemental impurities, phase purity, density, thermal properties, mechanical properties, optical and vibrational properties, and the results of molecular dynamics simulations are presented, as well as information on the surface composition and morphology after polishing. Although the existing literature on the alteration of ISG is not extensively reviewed here, the results of well-controlled static alteration experiments are presented here as a point of reference for other performance investigations.

Article discusses experimental results which reveal that the apparent activation-energy for grain-growth in an fcc-based AlxCoCrFeNi high entropy alloy (HEA) system increases from 179 to 486 kJ/mol when the Al content increases from x = 0.1 to 0.3.

Article evaluating wear and corrosion behavior for the AlCoCrFeNi2.1 eutectic high entropy alloy consisting of BCC (B2), and FCC (L12) lamellae.

This article focuses on Al0.7CoCrFeNi, a lamellar dual-phase (fcc + B2) precipitation-strengthenable eutectic high entropy alloy. The back-stresses from the coherent L12 precipitate were insufficient to cause improvement in twin nucleation, owing to elevated twinning stress under quasi-static testing. However, under dynamic testing high density of twins were observed.

Article describes an experiment where nanoindentation of three metastable dual-phase high entropy alloys (HEAs) was performed to obtain their inherent elastoplastic deformation responses.

Article provides a brief summary of state-of-art of surface biofunctionalization on implantable metals by CaP coatings.

Article describes study investigating the effects of testing solutions and conditions on hydroxyapatite (HAp) formation as a means of in vitro bioactivity evaluation of B2O3 containing 45S5 bioactive glasses.

Article covers the emerging trends of pharmacologic therapies for osteoarthritis (OA) such as traditional OA drugs (acetaminophen, non-steroidal anti-inflammatory drugs (NSAIDs), opioids, serotonin-norepinephrine reuptake inhibitors (SNRIs), intra-articular injections of corticosteroids, and dietary supplements), which are effective in pain relief but not in reversing damage, and are frequently associated with adverse events.

Article describes study which investigates the hot corrosion behavior of Al0.1CoCrFeNi high entropy alloy (HEA) and Ni-base Alloy 718.

Article describes experiment where researchers synthesized a PEGylated isoniazid (PEG-g-INH or PEG–INH) by gamma radiation-induced polymerization for the first time.

This article performs X-ray photoelectron, Raman, and diffraction studies of few-layered pulsed laser deposited WS₂ films as a function of laser fluence and frequency to understand the impact on structure and properties.

This article microstructurally tailors an exceptionally high-strength titanium alloy, Ti-6Al-2Sn-4Zr-6Mo (Ti6246) through friction stir processing (FSP) in order to provide enhanced weight savings and improved fuel efficiency. The specific strength attained in one of the conditions is close to 450 MPa m³/mg, which is about 22% to 85% greater than any commercially available metallic material. This novel nano particle strengthened Ti alloy is a potential replacement for many structural alloys, enabling significant weight reduction opportunities.

Article describes study evaluating the electro-catalytic behavior of recently developed Pt-, Pd-, and Pt/Pd-based metallic glasses using scanning electrochemical microscopy.

Article studying c/a ratio and transformation volume change of h.c.p. (hexagonal close packed) epsilon martensite phase in transformative high entropy alloys (HEAs) quantified as functions of alloy chemistry, friction stir processing and tensile deformation. The study reveals that while intrinsic c/a is dependent on alloying elements, c/a of epsilon in transformative HEAs changes with processing and deformation.

Article describes a study in which c/a ratio and transformation volume change of h.c.p. epsilon martensite phase in transformative high entropy alloys (HEAs) were quantified as functions of alloy chemistry, friction stir processing and tensile deformation.

The article focuses on a study that widens the toolbox to manufacture HEAs with exceptional corrosion resistance by additive manufacturing. CoCrFeMnNi high entropy alloys (HEAs) were additively manufactured (AM) by laser powder bed fusion and their corrosion resistance in 3.5 wt% NaCl solution was studied by potentiodynamic polarization and electrochemical impedance spectroscopy tests. A systematic study of AM CoCrFeMnNi HEAs’ porosity under a wide range of laser processing parameters was conducted and a processing map was constructed to identify the optimal laser processing window for CoCrFeMnNi HEAs.

This article presents a study that aims to understand the fundamental aspects of the laser-bone interaction in three-dimensional laser machining of the bone through an integrated experimental-computational approach.

Author Manuscript version of an article designing a new type of electrocatalysts consisting of transition metal halide molecules covered by graphene sheets. This work provides a theoretical base for rationally designing durable electrocatalysts with excellent catalytic activities.

Article provides a detailed overview of the benefits and issues of metal alloys when used as biomedical implants and how they are improved by bioactive glass-based coatings for biomedical applications.

Article describes an experiment where a self-organized 2D nanolaminate with an average lamella thickness of ~22 nm was formed in the subsurface of a cold-sprayed WC-reinforced metal matrix composite (MMC) Cu-MoS2-WC during oscillatory sliding, resulting in more stable friction and improved wear resistance.