Data management plan for the grant, "Collaborative Research: Combined Tribological and Bactericidal Effect of Bioinjectable Nanodiamonds on Biological Joints."

Data management plan for the grant "Consortium on Sensing, Energy-efficient Electronics and Photonics with 2D Materials and Integrated Systems for Training the Next-Generation"

Article provides an overview of recent progress in superlubricity research involving solid, liquid, and gaseous media and discuss the prospects for achieving superlubricity in engineering applications leading to greater efficiency, durability, environmental quality, and hence global sustainability.

Data management plan for the grant, "Solid-State Additive Manufacturing of Durable Aluminum-Cerium Alloys for High-Temperature Aerospace Structural Applications."

Article is a study that designs a smart anode/liquid electrolyte interface for high energy density batteries that present large specific capacity retentions.

Data management plan for the grant, "In-Situ Monitoring for Quality Assurance and Machine Learning in Direct-Write Additive Manufacturing of 5G RF Electronic Ceramics." The principal near-term objective of the PI is to use in-situ monitoring to define the processing rules that determine the microstructure, macrostructure, and high-frequency dielectric response of electronic ceramic materials for advanced RF “grown” by laser-assisted direct-write AM. In-situ measurements will be correlated and validated with ex-situ characterization, and these data will iteratively guide synthesis and processing optimization. In parallel, the experimental measurements will be used as inputs for the physics-based process modeling. Predictions from the experimentally validated models will in turn: 1) guide synthesis and processing optimization and, 2) train and constrain ML. Thus, quality assurance is achieved.

Article using ab initio calculations and experimental observations to show that {332}<113> twinning can be described as a polymorphic solid-state transformation able to produce either twinned or martensitic structures with a unified transformation path.

This article is a review of friction stir additive manufacturing (FSAM) and additive friction stir deposition (AFSD) and provides a systems approach framework and a conceptual process model to guide researchers.

Article reporting a scenario where a translucent Er3+−Yb3+ doped oxyfluoride precursor glass-ceramic (P-GC) becomes transparent with increasing crystal size and crystallinity.

Article presents for the first time the influence of a hierarchically decomposed B2 + A2 structure in an AlCo0.5Cr0.5FeNi HEA on the formation of magnetic vortex states within individual A2 (disordered BCC) precipitates, which are distributed in an ordered B2 matrix that is weakly ferromagnetic.

Article investigating the mechanical behavior of a metastable high entropy alloy (HEA) with composition Fe39-Mn20-Co20-Cr15-Si5-1Al (at%).

Article applies Laser Shock Peening with (LSP) and without protective coating (LPwC) to sensitized AA5083 followed by electrochemical analysis.

Article investigates the strength-ductility synergy of high-entropy alloys (HEAs).

Article studying c/a ratio and transformation volume change of h.c.p. (hexagonal close packed) epsilon martensite phase in transformative high entropy alloys (HEAs) quantified as functions of alloy chemistry, friction stir processing and tensile deformation. The study reveals that while intrinsic c/a is dependent on alloying elements, c/a of epsilon in transformative HEAs changes with processing and deformation.

This article microstructurally tailors an exceptionally high-strength titanium alloy, Ti-6Al-2Sn-4Zr-6Mo (Ti6246) through friction stir processing (FSP) in order to provide enhanced weight savings and improved fuel efficiency. The specific strength attained in one of the conditions is close to 450 MPa m³/mg, which is about 22% to 85% greater than any commercially available metallic material. This novel nano particle strengthened Ti alloy is a potential replacement for many structural alloys, enabling significant weight reduction opportunities.

This article demonstrates a facile single-step processing route for the development of bimodal grain structure in austenitic stainless steel, SS316L.

Article evaluating wear and corrosion behavior for the AlCoCrFeNi2.1 eutectic high entropy alloy consisting of BCC (B2), and FCC (L12) lamellae.

This article presents physical property data (both published and previously unpublished) on a single batch of International Simple Glass (ISG), which was cast into individual ingots that were distributed to the collaborators. Properties from the atomic scale to the macroscale, including composition and elemental impurities, phase purity, density, thermal properties, mechanical properties, optical and vibrational properties, and the results of molecular dynamics simulations are presented, as well as information on the surface composition and morphology after polishing. Although the existing literature on the alteration of ISG is not extensively reviewed here, the results of well-controlled static alteration experiments are presented here as a point of reference for other performance investigations.

This article presents a study that aims to understand the fundamental aspects of the laser-bone interaction in three-dimensional laser machining of the bone through an integrated experimental-computational approach.

This article performs X-ray photoelectron, Raman, and diffraction studies of few-layered pulsed laser deposited WS₂ films as a function of laser fluence and frequency to understand the impact on structure and properties.

Author Manuscript version of an article designing a new type of electrocatalysts consisting of transition metal halide molecules covered by graphene sheets. This work provides a theoretical base for rationally designing durable electrocatalysts with excellent catalytic activities.

Article investigating a non-conductive sensor textile as a viable solution for corrosion in underground and submerged steel pipes. The results offer a new option for sub-surface corrosion sensing using low cost, easily fabricated sensor textiles.

Article examining the palette of morphologies that arises when microdroplets are deformed into nonspherical shapes in a controllable manner. Specifically, geometrical confinement and mechanical strain are used to manipulate orientational order, phase transitions, and topological defects that arise in chiral liquid crystal droplets. The reported structures and assemblies offer potential for applications in smart coatings, smart fabrics, and wearable sensors.

Article using in-situ neutron diffraction to correlate SF strengthening to work hardening behavior in a low SFE Fe40Mn20Cr15Co20Si5 (at%) high entropy alloy, SFE ~ 6.31 mJ m−2. Cooperative activation of multiple mechanisms was indicated by increases in SF strengthening and γ-f.c.c. → ε-h.c.p. transformation leading to a simultaneous increase in strength and ductility. The present study demonstrates the application of in-situ, neutron or X-ray, diffraction techniques to correlating SF strengthening to work hardening.