In Situ Fabrication of a Graphene-Coated Threedimensional Nickel Oxide Anode for High-Capacity Lithium-Ion Batteries (open access)

In Situ Fabrication of a Graphene-Coated Threedimensional Nickel Oxide Anode for High-Capacity Lithium-Ion Batteries

This article discusses the development of an in situ fabrication of a graphene-coated, three-dimensional (3D) NiO-Ni structure by simple chemical vapor deposition (CVD).
Date: October 5, 2017
Creator: Kang, Chiwon; Cha, Eunho; Lee, Sang Hyub & Choi, Wonbong
Object Type: Article
System: The UNT Digital Library
Tribologically induced nanolaminate in a cold-sprayed WC-reinforced Cu matrix composite: a key to high wear resistance (open access)

Tribologically induced nanolaminate in a cold-sprayed WC-reinforced Cu matrix composite: a key to high wear resistance

Article describes an experiment where a self-organized 2D nanolaminate with an average lamella thickness of ~22 nm was formed in the subsurface of a cold-sprayed WC-reinforced metal matrix composite (MMC) Cu-MoS2-WC during oscillatory sliding, resulting in more stable friction and improved wear resistance.
Date: November 15, 2019
Creator: Zhang, Yinyin; Choudhuri, Deep; Scharf, Thomas W.; Descartes, Sylvie & Chromik, Richard R.
Object Type: Article
System: The UNT Digital Library
Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction (open access)

Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction

Article investigating the mechanical behavior of a metastable high entropy alloy (HEA) with composition Fe39-Mn20-Co20-Cr15-Si5-1Al (at%).
Date: January 15, 2022
Creator: Polatidis, E.; Shukla, S.; Čapek, J.; Van Petegem, S.; Casati, N. & Mishra, R. S.
Object Type: Article
System: The UNT Digital Library
Complex Concentrated Alloys (CCAs)—Current Understanding and Future Opportunities (open access)

Complex Concentrated Alloys (CCAs)—Current Understanding and Future Opportunities

Article providing an overview of the special issue titled Complex Concentrated Alloys (CCAs) - Current Understanding and Future Opportunities. The published papers in this special issue aim to report on the current state of research in complex concentrated alloys (CCAs) as well as compelling future opportunities in wide ranging applications.
Date: September 11, 2020
Creator: Mukherjee, Sundeep
Object Type: Article
System: The UNT Digital Library
Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed A₁₀.₁CoCrFeNi High Entropy Alloy (open access)

Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed A₁₀.₁CoCrFeNi High Entropy Alloy

This article reports grain refinement using friction stir processing and a detailed study on the microstructural evolution at various locations in the processed region using scanning electron microscopy, in addition to the effect of grain refinement on the tensile properties and the underlying deformation mechanisms in both coarse-grained and fine-grained materials.
Date: August 7, 2014
Creator: Komarasamy, Mageshwari; Kumar, N.; Tang, Z.; Mishra, Rajiv & Liaw, P.K.
Object Type: Article
System: The UNT Digital Library
Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel (open access)

Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel

This article describes a study in which a vegetable oil-based lubricant was used to conduct wear analysis and to analyze the effectiveness of microlubrication during end milling AISI 1018 steel.
Date: April 15, 2014
Creator: Shaikh, Vasim; Boubekri, Nourredine & Scharf, Thomas W.
Object Type: Article
System: The UNT Digital Library
Macroscale Superlubricity Accomplished by Sb2O3-MSH/C Under High Temperature (open access)

Macroscale Superlubricity Accomplished by Sb2O3-MSH/C Under High Temperature

Article reporting the high-temperature superlubricity phenomenon accomplished in coatings produced by burnishing powders of antimony trioxide (Sb₂O₃) and magnesium silicate hydroxide coated with carbon (MSH/C) onto the nickel superalloy substrate.
Date: April 15, 2021
Creator: Gao, Kai
Object Type: Article
System: The UNT Digital Library
Charge Transport in Two-Dimensional Materials Based Integrated Flexible Energy System (open access)

Charge Transport in Two-Dimensional Materials Based Integrated Flexible Energy System

Data management plan for the grant "Charge Transport in Two-Dimensional Materials Based Integrated Flexible Energy System."
Date: 2021-04-15/2022-03-14
Creator: Choi, Wonbong
Object Type: Text
System: The UNT Digital Library
Multi-body interactions and carrier dynamics in WSe2 for high-performance quantum-enabled devices (open access)

Multi-body interactions and carrier dynamics in WSe2 for high-performance quantum-enabled devices

Data management plan for the grant "Multi-body interactions and carrier dynamics in WSe2 for high-performance quantum-enabled devices."
Date: 2021-09-15/2024-09-14
Creator: Kaul, Anupama
Object Type: Text
System: The UNT Digital Library
Enabling Multi-scale Modeling by Deciphering Fundamental Mechanisms Underlying Phase Stability, Deformation and Oxidation in Refractory Complex Concentrated Alloys (RCCAs) and Intermetallics (open access)

Enabling Multi-scale Modeling by Deciphering Fundamental Mechanisms Underlying Phase Stability, Deformation and Oxidation in Refractory Complex Concentrated Alloys (RCCAs) and Intermetallics

Data management plan for the research project "Enabling Multi-scale Modeling by Deciphering Fundamental Mechanisms Underlying Phase Stability, Deformation and Oxidation in Refractory Complex Concentrated Alloys (RCCAs) and Intermetallics."
Date: 2021-09-15/2025-09-25
Creator: Banerjee, Rajarshi
Object Type: Text
System: The UNT Digital Library
Co-introduction of precipitate hardening and TRIP in a TWIP high-entropy alloy using friction stir alloying (open access)

Co-introduction of precipitate hardening and TRIP in a TWIP high-entropy alloy using friction stir alloying

Article exploring friction stir alloying (FSA) to tune the microstructure and a composition of a TWIP high-entropy alloy by adding Ti, and thus activating site-specific deformation mechanisms that occur concomitantly in a single alloy. This approach presents a novel microstructural architecture to design alloys, an approach that combines and optimizes local compositions such that multiple deformation mechanisms can be activated to enhance engineering properties.
Date: January 15, 2021
Creator: Wang, Tianhao; Shukla, Shivakant; Gwalani, Bharat; Sinha, S.; Thapliyal, Saket; Frank, Michael et al.
Object Type: Article
System: The UNT Digital Library
Development of Combinatorial Processing Techniques for Accelerated Discovery of Complex Concentrated Alloy (or Multi-Principal Element Alloys) for Structural Applications (open access)

Development of Combinatorial Processing Techniques for Accelerated Discovery of Complex Concentrated Alloy (or Multi-Principal Element Alloys) for Structural Applications

Data management plan for the research grant, "Development of Combinatorial Processing Techniques for Accelerated Discovery of Complex Concentrated Alloy (or Multi-Principal Element Alloys) for Structural Applications"
Date: 2022-05-15/2023-05-14
Creator: Banerjee, Rajarshi
Object Type: Text
System: The UNT Digital Library
Ex situ and in situ Investigation of the Thermomechanical Behavior of Shape Morphing Materials from Room Temperature to Ultra-High Temperatures (open access)

Ex situ and in situ Investigation of the Thermomechanical Behavior of Shape Morphing Materials from Room Temperature to Ultra-High Temperatures

Data management plan for the grant, "Ex situ and in situ Investigation of the Thermomechanical Behavior of Shape Morphing Materials from Room Temperature to Ultra-High Temperatures."
Date: 2023-09-15/2024-09-14
Creator: Young, Marcus L.
Object Type: Text
System: The UNT Digital Library
Collaborative Research: DMREF: AI-enabled Automated design of ultrastrong and ultraelastic metallic alloys (open access)

Collaborative Research: DMREF: AI-enabled Automated design of ultrastrong and ultraelastic metallic alloys

Data management plan for the grant, "Collaborative Research: DMREF: AI-enabled Automated design of ultrastrong and ultraelastic metallic alloys"
Date: 2024-01-15/2027-09-30
Creator: Zheng, Yufeng
Object Type: Text
System: The UNT Digital Library

Plexcitonic interactions in spherical and bi-pyramidical Au nanoparticles with monolayer WSe₂

Article describes how plasmons associated with zero-dimensional (0D) metal nanoparticles and their synergistic interactions with excitons in two-dimensional (2D) semiconductors offer opportunities for remarkable spectral tunability not otherwise evident in the pristine parent materials, which necessitates an in-depth study elucidating the nature of the plasmonic and excitonic interactions, jointly referred to as plexcitons in order to understand the foundational aspects of the light–matter interactions in hybrid 0D–2D systems. The authors examine the plexcitonic interactions of van der Waals (vdWs) hybrid structures composed of 2D WSe2 and 0D Au nanoparticles (Au-NPs) in their spherical (Au-Sp) and bi-pyramidical (Au-BP) architectures, which demonstrates that geometry-mediated response of the AuNPs provides another degree of freedom to modulate the carrier photodynamics in WSe₂.
Date: November 15, 2022
Creator: Jayanand, Kishan & Kaul, Anupama
Object Type: Article
System: The UNT Digital Library