Resource Type

Metastability-assisted fatigue behavior in a friction stir processed dual-phase high entropy alloy (open access)

Metastability-assisted fatigue behavior in a friction stir processed dual-phase high entropy alloy

This article explores metastability-based high entropy alloy design which can open a new strategic path for designing high strength materials. However, high strength is always coupled with poor damage tolerance under cyclic loading conditions (fatigue). To overcome this drawback, the articles presents grain-refined Fe42Mn28Cr15Co10Si5 exhibiting significantly high fatigue strength as compared with leading transformation induced plasticity steels upon friction stir processing.
Date: July 7, 2018
Creator: Liu, K; Nene, S. S.; Frank, M.; Sinha, S. & Mishra, R. S.
System: The UNT Digital Library
Internally shunted sputtered niobium nitride Josephson junctions with a TaNx barrier for nonlatching logic applications (open access)

Internally shunted sputtered niobium nitride Josephson junctions with a TaNx barrier for nonlatching logic applications

This article reports on the growth, fabrication, and device characterization of NbN internally shunted Josephson junctions with a TaNx barrier.
Date: December 28, 2000
Creator: Kaul, Anupama; Whiteley, Stephen R.; Van Duzer, Theodore; Yu, Lei; Newman, Nathan & Rowell, John M.
System: The UNT Digital Library
Fabrication of wide-IF 200–300GHz superconductor–insulator–superconductor mixers with suspended metal beam leads formed on silicon-on-insulator (open access)

Fabrication of wide-IF 200–300GHz superconductor–insulator–superconductor mixers with suspended metal beam leads formed on silicon-on-insulator

This article reports on a fabrication process that uses silicon-oninsulator (SOI) substrates and micromachining techniques to form wide-IF superconductor–insulator–superconductor (SIS) mixer devices that have suspended metal beam leads for rf grounding. Aside from a description of the fabrication process, electrical measurements of these Nb/Al–AlNₓ /Nb trilayer devices will also be presented.
Date: October 7, 2004
Creator: Kaul, Anupama; Bumble, Bruce; Lee, Karen A.; LeDuc, Henry G.; Rice, Frank & Zmuidzinas, Jonas
System: The UNT Digital Library
Probing Noise in Flux Qubits via Macroscopic Resonant Tunneling (open access)

Probing Noise in Flux Qubits via Macroscopic Resonant Tunneling

Article on the characterization of noise in a flux qubit using macroscopic resonant tunneling between the two lowest lying states of a bistable rf SQUID. Analysis of these results indicates that the dominant source of low energy flux noise in this device is a quantum mechanical environment in thermal equilibrium.
Date: September 10, 2008
Creator: Harris, R.; Johnson, M. W.; Han, S.; Berkley, A. J.; Johansson, J.; Bunyk, P. et al.
System: The UNT Digital Library
Geometrical dependence of the low-frequency noise in superconducting flux qubits (open access)

Geometrical dependence of the low-frequency noise in superconducting flux qubits

Article reporting on a study of a series of 85 devices of vary design using a general method for directly measuring the low-frequency flux noise (below 10 Hz) in compound Josephson-junction superconducting flux qubits. The results support the hypothesis that local impurities in the vicinity of the qubit wiring are a key source of low-frequency flux noise in superconducting devices.
Date: February 26, 2009
Creator: Lanting, T.; Berkley, A. J.; Bumble, B.; Bunyk, P.; Fung, A.; Johansson, J. et al.
System: The UNT Digital Library
Interrogating vertically oriented carbon nanofibers with nanomanipulation for nanoelectromechanical switching applications (open access)

Interrogating vertically oriented carbon nanofibers with nanomanipulation for nanoelectromechanical switching applications

Article demonstrates electrostatic switching in vertically oriented carbon nanofibers synthesized on refractory metallic nitride substrates, where pull-in voltages Vpi ranged from 10 to 40 V. A finite element model was also developed to determine a theoretical Vpi and results were compared to experiment.
Date: August 31, 2009
Creator: Kaul, Anupama; Khan, Abdur R.; Bagge, Leif; Megerian, Krikor G.; LeDuc, Henry G. & Epp, Larry
System: The UNT Digital Library
Synchronization of multiple coupled rf-SQUID flux qubits (open access)

Synchronization of multiple coupled rf-SQUID flux qubits

Article demonstrating a practical strategy for synchronizing the properties of compound Josephson junction (CJJ) radio frequency monitored superconducting quantum interference device (rf-SQUID) qubits on a multi-qubit chip.
Date: December 21, 2009
Creator: Harris, R.; Brito, F.; Berkley, A. J.; Johansson, J.; Johnson, M. W.; Lanting, T. et al.
System: The UNT Digital Library
An investigation on the concrete properties containing colemanite (open access)

An investigation on the concrete properties containing colemanite

This article summarizes the results of an investigation on the effect of the colemanite on physical and mechanical properties of concrete using colemanite as replacement aggregate.
Date: March 31, 2010
Creator: Gencel, Osman; Brostow, Witold, 1934-; Ozel, Cengiz & Filiz, Mümin
System: The UNT Digital Library
Temperature-dependent structural heterogeneity in calcium silicate liquids (open access)

Temperature-dependent structural heterogeneity in calcium silicate liquids

This article discusses temperature-dependent structural heterogeneity in calcium silicate liquids.
Date: December 7, 2010
Creator: Benmore, Chris J.; Weber, J. K. R.; Wilding, Martin C.; Du, Jincheng & Parise, John B.
System: The UNT Digital Library
Influence of Silanization Treatment on Thermomechanical Properties of Multiwalled Carbon Nanotubes: Poly(methylmethacrylate) Nanocomposites (open access)

Influence of Silanization Treatment on Thermomechanical Properties of Multiwalled Carbon Nanotubes: Poly(methylmethacrylate) Nanocomposites

This article reports results for functionalized as well as unfunctionalized carbon nanotube polymer composites.
Date: July 30, 2011
Creator: Velasco-Santos, Carlos; Martinez-Hernandez, Ana Laura; Brostow, Witold, 1934- & Castaño, Victor M.
System: The UNT Digital Library
Plasma Treated Multi-Walled Carbon Nanotubes (MWCNTs) for Epoxy Nanocomposites (open access)

Plasma Treated Multi-Walled Carbon Nanotubes (MWCNTs) for Epoxy Nanocomposites

This article describes the depositing of plasma nanocoating of allylamine on the surfaces of multi-walled carbon nanotubes to provide desirable functionalities and thus to tailor the surface characteristics of multi-walled carbon nanotubes for improved dispersion and interfacial adhesion in epoxy matrices.
Date: December 19, 2011
Creator: Ritts, Andrew C.; Yu, Qingsong; Li, Hao; Lombardo, Stephen J.; Han, Xu; Xia, Zhenhai et al.
System: The UNT Digital Library
Carbon Nanomaterials for Optical Absorber Applications (open access)

Carbon Nanomaterials for Optical Absorber Applications

Article describing optical absorbers based on vertically aligned multi-walled carbon nanotubes (MWCNTs), synthesized using electric-field assisted growth that show an ultra-low reflectance, 100X lower compared to the benchmark, a diffuse metal black - Au-black - from wavelength λ ~ 350 nm – 2500 nm.
Date: December 28, 2011
Creator: Kaul, Anupama; Coles, James; Megerian, Krikor; Eastwood, Michael; Green, Robert; Pagano, Thomas et al.
System: The UNT Digital Library
Bulk Nanostructured Metals and Alloys: Processing, Structure, and Thermal Stability (open access)

Bulk Nanostructured Metals and Alloys: Processing, Structure, and Thermal Stability

Introduction to a special issue of the Journal of Nanomaterials focusing on bulk nanostructured alloys and metals.
Date: November 21, 2012
Creator: Bahmanpour, Hamed; Kajbafvala, Amir; Maneshian, Mohammad H.; Zargar, Hamid Reza & Youssef, Khaled
System: The UNT Digital Library
Facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free eletrocatalysts for oxygen reduction reaction (open access)

Facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free eletrocatalysts for oxygen reduction reaction

Article on facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free electrocatalysts for oxygen reduction reaction.
Date: February 1, 2013
Creator: Jeon, In-Yup; Choi, Hyun-Jung; Choi, Min; Seo, Jeong-Min; Jung, Sun-Min; Kim, Min-Jung et al.
System: The UNT Digital Library
Self-Assembly Techniques for Nanofabrication (open access)

Self-Assembly Techniques for Nanofabrication

Article introduces a special issue of the Journal of Nanomaterials that addresses the research studies on fabrication, processing, and applications of self-assembled nanostructures.
Date: December 24, 2013
Creator: Kajbafvala, Amir; Bahmanpour, Hamed; Maneshian, Mohammad H. & Li, Minghang
System: The UNT Digital Library
Nanopatterned Graphene Field Effect Transistor Fabricated Using Block Co-polymer Lithography (open access)

Nanopatterned Graphene Field Effect Transistor Fabricated Using Block Co-polymer Lithography

This article demonstrates a successful fabrication of Nanopatterened Graphene (NPG) using a PS-b-P4VP polymer.
Date: January 9, 2014
Creator: Choi, Duyoung; Kuru, Cihan; Choi, Chulmin; Noh, Kunbae; Hong, Soon-Kook; Das, Santanu et al.
System: The UNT Digital Library
Some Issues in Cohesive Surface Modeling (open access)

Some Issues in Cohesive Surface Modeling

Article provides an overview of issues in cohesive surface formulation that are of interest to the author.
Date: February 28, 2014
Creator: Needleman, Alan
System: The UNT Digital Library
Point-by-Point Compositional Analysis for Atom Probe Tomography (open access)

Point-by-Point Compositional Analysis for Atom Probe Tomography

This article demonstrates a new alternate approach to data processing for analyses that traditionally employed grid-based counting methods, as demonstrated using an atom-probe analysis of a Ni-based super-alloy.
Date: March 5, 2014
Creator: Stephenson, Leigh T.; Ceguerra, Anna V.; Li, Tong; Rojhirunsakool, Tanaporn; Nag, Soumya; Banerjee, Rajarshi et al.
System: The UNT Digital Library
Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel (open access)

Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel

This article describes a study in which a vegetable oil-based lubricant was used to conduct wear analysis and to analyze the effectiveness of microlubrication during end milling AISI 1018 steel.
Date: April 15, 2014
Creator: Shaikh, Vasim; Boubekri, Nourredine & Scharf, Thomas W.
System: The UNT Digital Library
Controlling the length scale and distribution of the ductile phase in metallic glass composites through friction stir processing (open access)

Controlling the length scale and distribution of the ductile phase in metallic glass composites through friction stir processing

This article demonstrates the refinement and uniform distribution of the crystalline dendritic phase by friction stir processing of titanium based in situ ductile-phase reinforced metallic glass composite.
Date: June 24, 2014
Creator: Singh Arora, Harpreet; Mridha, Sanghita; Singh Grewal, Harpeet; Singh, Harpreet; Hofmann, Douglas C. & Mukherjee, Sundeep
System: The UNT Digital Library
Development and application of a novel precession electron diffraction technique to quantify and map deformation structures in highly deformed materials—as applied to ultrafine-grained titanium (open access)

Development and application of a novel precession electron diffraction technique to quantify and map deformation structures in highly deformed materials—as applied to ultrafine-grained titanium

Article describes precession electron diffraction (PED), which makes possible the very accurate and automated quantitative characterization of technically interesting materials that historically have been difficult to analyze due to their dimensions and/or degree of deformation, including specifically ultrafine-grained metallic structures with high dislocation densities.
Date: August 13, 2014
Creator: Ghamarian, Iman; Liu, Yue; Samimi, Peyman & Collins, Peter
System: The UNT Digital Library
Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed A₁₀.₁CoCrFeNi High Entropy Alloy (open access)

Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed A₁₀.₁CoCrFeNi High Entropy Alloy

This article reports grain refinement using friction stir processing and a detailed study on the microstructural evolution at various locations in the processed region using scanning electron microscopy, in addition to the effect of grain refinement on the tensile properties and the underlying deformation mechanisms in both coarse-grained and fine-grained materials.
Date: August 7, 2014
Creator: Komarasamy, Mageshwari; Kumar, N.; Tang, Z.; Mishra, Rajiv & Liaw, P.K.
System: The UNT Digital Library
Preparation and Characterization of Injectable Brushite Filled-Poly (Methyl Methacrylate) Bone Cement (open access)

Preparation and Characterization of Injectable Brushite Filled-Poly (Methyl Methacrylate) Bone Cement

This article discusses the design of an alternative cement system that can better accommodate calcium-phosphate additives while preserving cement rheological properties and performance.
Date: September 19, 2014
Creator: Rodriguez, Lucas C.; Chari, Jonathan; Aghyarian, Shant; Gindri, Izabelle M.; Kosmopoulos, Victor & Rodrigues, Danieli C.
System: The UNT Digital Library
Wear and friction of composites of an epoxy with boron containing wastes (open access)

Wear and friction of composites of an epoxy with boron containing wastes

Article describes development of polymer composites based on epoxy resins containing up to 50 wt. % of boron wastes and determined their pin-on-disk dynamic friction, wear, Shore D hardness and surface roughness.
Date: November 18, 2014
Creator: Uygunoğlu, Tayfun; Brostow, Witold, 1934- & Gunes, Ibrahim
System: The UNT Digital Library