Erratum to “From mechanics to thermodynamics: A relation between the brittleness and the thermal expansivity for polymers” that provides the Declaration of Interest statement that was missed to be included in the original publication.

This article studies the corrosion and corrosion fatigue characteristics of LPBF 316L stainless steels (SS) in 3.5 wt.% NaCl solution using an electrochemical method, high cycle fatigue, and fatigue crack propagation testing.

Article examining Aluminium alloy 5083 subjected to Laser Shock Peening both with (LSP) and without protective coating (LPwC) at multiple pulse densities. A second LPwC treatment was conducted fully submersed under water, in addition to the standard laminar water flow condition. Results show that compressive residual stresses were generated in all cases, although their character varied depending on the peening strategy and method of confinement.

This article is a review summarizing and discussing various ex-situ inspections and in-situ monitoring methods, including electron-based methods, thermal methods, acoustic methods, laser breakdown, and mechanical methods, for metal additive manufacturing.

This article reports a dramatic increase in the grain boundary strengthening or Hall-Petch coefficient, K, by systematically investigating the effect of Al addition on tensile yield strength in CoFeNi and CoCrFeNi high entropy alloys (HEAs) or complex concentrated alloys (CCAs). Such a trend is attributed to the ordering mediated nano-clustering in Al containing HEA/CCAs.

This article explores the effects of laser surface melting on microstructure and surface topography evolution in AZ31B magnesium alloy.

Article studying the influence of microwave signals of different shapes on the magnetoacoustic wave system with a giant nonlinearity in canted antiferromagnet FeBO₃ at room temperature, which is close to its phase transition to the paramagnetic state. Results represent the first observation of the macroscopic quantum statistical phenomenon, Bose-Einstein condensation of magnetoacoustic wave quanta in a wave system with a high level of thermal fluctuations.

This article uses iron oxide/alumina heterostructures formed by two-step infiltration of polystyrene-block-polyvinyl pyridine block copolymer with iron and aluminum precursors from the solution and vapor-phases, respectively, to show that the phase and morphology of iron oxide nanoparticles dramatically depend on the approach used to remove the polymer. The article extends the boundaries of structure manipulations in multicomponent heterostructures synthesized using polymer infiltration synthesis and their properties.

Article applies Laser Shock Peening with (LSP) and without protective coating (LPwC) to sensitized AA5083 followed by electrochemical analysis.

This article varies the surface anchoring strength and achieves a uniform lying helical structure with long-range order as thermodynamically stable state without any external support in Chiral nematic liquid crystals (CLCs).

Article on the implementation of liquid exfoliation to inkjet-print two-dimensional (2D) black phosphorous (BP) and molybdenum disulfide (MoS₂) p–n heterojunctions on a standard indium tin oxide (ITO) glass substrate in a vertical architecture. The authors also compared the optical and electrical properties of the inkjet-printed BP layer with that of the MoS₂ and the electrical properties of the mechanically exfoliated MoS₂ with that of the inkjet-printed MoS₂.

This article aims to determine the nucleation and growth mechanisms of PbSO4 nanoparticles in various solutions to potentially reduce or control the buildup of PbSO4 on battery electrodes over time.

Article reporting the high-temperature superlubricity phenomenon accomplished in coatings produced by burnishing powders of antimony trioxide (Sb₂O₃) and magnesium silicate hydroxide coated with carbon (MSH/C) onto the nickel superalloy substrate.

This article combines machine learning (ML), finite element analysis (FEA), and empirical experiments to develop data-driven models that characterize interfacial mechanical properties precisely. It also provides a code package containing trained ML models, allowing other researchers to establish T–S relations for different material interfaces.

This article identifies a bulk texture effect on elastic anisotropy in laser powder bed fused Ti6Al4V by employing an effective bulk modulus elastography technique coupled with ultrasound shear wave velocity measurement at a frequency of 20 MHz inside the material.

Article studying material response under dynamic short duration-high temperature oxidation.

Data management plan for the grant "Process and Materials Development for Additive Manufacturing (AM) of Tungsten-Based Alloys with Superior High Temperature Performance and Good Room Temperature Ductility." Research on CALPHAD simulations will be conducted to optimize the chemical composition of tungsten based alloys towards 3D printability while boosting mechanical performance through solid solution and dispersion strengthening. This will followed by powder prototyping to validate the simulation results experimentally and to finalize the chemical composition of interest. Process parameter optimization and post-process heat treatment design will help to achieve optimal low-to-high temperature mechanical properties. Mechanical testing and microstructural characterization will be performed to establish process-microstructure-property relationships.

Article on the ion-exchange and associated interfacial reaction mechanisms of silicate glasses. This work reports findings that shed light on the complex ion-exchange mechanisms during glass hydration and enables more detailed understanding of the corrosion and glass-water interactions of silicate glasses which has the potential to impact both science and technology.

Data management plan for the grant "Charge Transport in Two-Dimensional Materials Based Integrated Flexible Energy System."

Data management plan for the grant, "Self-powered Wireless Sensors and Interfaces for UAVs." Self-powered wireless sensors acting as nanogenerators can not only harvest ambient environment energy during the flight but also are capable of wirelessly monitoring pressure, temperature and other parameters to make the UAV truly an intelligent transportation system (ITS). This proposal requests the acquisition of a Mask Aligner to pattern such self-powered sensors with nano-antenna structures for wireless communication. The addition of the proposed system will enable researchers to study novel 2D materials as self-powered sensors and actuators. The proposed infrastructure would allow the development of smart, autonomous mobility systems with breakthroughs in intelligent technologies, research and workforce preparation.

This article highlights that design of Al alloys for laser-powder bed fusion (L-PBF) can lead to fundamental change in the microstructure evolution, proposed alloy design strategies lead to synergy between and printability and performance, hierarchical and heterogeneous microstructures have potential to overcome the strength-ductility tradeoff, and alloy design incorporating the specific attributes of an AM technology is crucial to maximizing its potential.

Article conducting a systematic study to tune the equimolar precursor ratio of the organic halide (methylammonium iodide; MAI) and metal halide (lead iodide; PbI2) in a fixed solvent mixture of N,N-dimethylformamide (DMF):dimethylsulfoxide (DMSO).

Article reporting on the inkjet printed, direct contact study of solution-processed, 2D perovskite-based photodetectors (PDs) formed on flexible PI substrates. Silver (Ag) and graphene (Gr) inks have been engineered to serve as efficient electrical contacts for solution-processed two-dimensional (2D) organo-halide (CH3(CH2)3NH3)2(CH3NH3)n−1PbnI3n+1 (n = 4) layered perovskites, where all inkjet-printed heterostructure PDs were fabricated on polyimide (PI) substrates.

Data management plan for the grant "Multi-body interactions and carrier dynamics in WSe2 for high-performance quantum-enabled devices."