Patent relating to metal hydroxide derivatives containing chemically bound organophosphorus or polyphosphate species as flame retardants.

Article on a modified embedded atom method study of the mechanical properties of carbon nanotube reinforced nickel composites.

This article summarizes the results of an investigation on the effect of the colemanite on physical and mechanical properties of concrete using colemanite as replacement aggregate.

Poster awarded first place in the 2013 UNT Graduate Exhibition in the Engineering category. This poster discusses laser machining of structural ceramics and an integrated experimental and numerical approach for surface finish.

This article demonstrates a new alternate approach to data processing for analyses that traditionally employed grid-based counting methods, as demonstrated using an atom-probe analysis of a Ni-based super-alloy.

This article reviews approaches for improvement of tribological properties of polymers based on inclusion of fillers.

In this article, different composite materials have been developed and characterized for different applications in the health science field and as optoelectromechanical sensors.

Article describes the response of [100]-oriented single-crystal face-centered-cubic Al0.1CoCrFeNi and Al0.3CoCrFeNi high-entropy alloy (HEA) microcrystals tested from 293 to 573 K by means of in situ micro-compression.

This article demonstrates that tribochemical reactions occur even in dry conditions when hydrogenated diamond-like carbon (H-DLC) surface is slid against two-dimensional (2D) molybdenum disulfide along with nanodiamonds in dry nitrogen atmosphere.

This paper discusses the formation of primary chemical bonds between bamboo surface active groups and the binders.

Article describes experiment in which liquid Al2O3 was supercooled more than 500 K below its melting point (Tm = 2,327 K) using aerodynamic levitation and laser heating techniques.

Article systematically studying the effect of Si, P, and S impurities on the diffusion and binding of an H atom in a face-centered-cubic (FCC) Ni lattice using density functional theory (DFT),

This article, as an alternative route to empirical models, shows that a structural descriptor based on the number of topological constraints per atom can be used to predict the initial dissolution rate of aluminosilicate and borosilicate glasses after being parameterized on different families of glasses (specific series of borosilicate glasses). Results show that, provided that corrections are made for high alkali content glasses that dissolve incongruently (preferential release of Na), the model gives reasonable predictions, even far from its training domain.

Article discusses a novel eutectoid nano-lamellar (FCC + L12)/(BCC + B2) microstructure that has been discovered in a relatively simple Al0.3CoFeNi high entropy alloy (HEA) or complex concentrated alloy (CCA).

This article applies cryo-based atom probe tomography to directly reveal the water-solid interface and hydrated corrosion layers making up the nanoscale porous structure of a corroded borosilicate glass in its native aqueous environment. The analysis includes morphology and compositional mapping of the inner gel/glass interface, isolation of a tomographic sub-volume of the tortuous water-filled gel, and comparison of the gel structure with simulations.

Article presents an in-depth discussion of liquid crystal blue phases (BPs).

Data management plan for the grant, "CAREER: Manufacturing of Mechanically Stable Nanoporous Ceramic Structures Via Selective Infiltration of Polymer Templates." This Faculty Early Career Development (CAREER) grant from the National Science Foundation supports fundamental research to elucidate a new strategy of manufacturing nanoporous ceramic structures with controllable structure and composition and programmable mechanical stability. The specific goal of this research is to discover processing-structure-property relationships in ceramic coatings and heterostructures by providing fundamental insights on the mechanism of liquid phase swelling-based infiltration of spin-coated polymer templates with inorganic precursors and defining the rules that control the resulting structure and, thus, access to various materials surfaces and interfaces.

This article highlights that design of Al alloys for laser-powder bed fusion (L-PBF) can lead to fundamental change in the microstructure evolution, proposed alloy design strategies lead to synergy between and printability and performance, hierarchical and heterogeneous microstructures have potential to overcome the strength-ductility tradeoff, and alloy design incorporating the specific attributes of an AM technology is crucial to maximizing its potential.

This article is a review that categorizes the compositional and microstructural approaches that exhibit potential for a combination of shear induced phase transformation and twinning, thereby expanding beyond the slip based mechanisms.

This article assembles large, pediatric-sized stents (Ø10 - Ø20 mm) from poly(L-lactide) fibers (DH-BDS) at two thicknesses, 250 µm and 300 µm. DH-BDS exhibiting hoop strength similar to metal stents and demonstrating minimal degradation and strength loss over the first year before completely disappearing within 3 to 4.5 years show promise as a pediatric interventional alternative to current strategies.

Article reporting on the inkjet printed, direct contact study of solution-processed, 2D perovskite-based photodetectors (PDs) formed on flexible PI substrates. Silver (Ag) and graphene (Gr) inks have been engineered to serve as efficient electrical contacts for solution-processed two-dimensional (2D) organo-halide (CH3(CH2)3NH3)2(CH3NH3)n−1PbnI3n+1 (n = 4) layered perovskites, where all inkjet-printed heterostructure PDs were fabricated on polyimide (PI) substrates.

Article investigates the strength-ductility synergy of high-entropy alloys (HEAs).

Article presents research where N-doped graphene (NG) has been covalently decorated with porphyrin and phthalocyanine moieties using click chemistry. Evidence of charge separation in these hybrids is secured from femtosecond transient absorption studies, acting NG as electron acceptor.

Article presents for the first time the influence of a hierarchically decomposed B2 + A2 structure in an AlCo0.5Cr0.5FeNi HEA on the formation of magnetic vortex states within individual A2 (disordered BCC) precipitates, which are distributed in an ordered B2 matrix that is weakly ferromagnetic.