Paper investigates the mobility dynamics in wireless sensor networks analytically, and discusses the advantages of the leader-follower model.

This article presents the design, modeling, and experimental characterization of flexible square-shaped spiral coils with different scaling factors for WPT systems. The effects of coil scaling factor on inductance, capacitance, resistance, and the quality factor (Q-factor) are modeled, simulated, and experimentally validated for the case of flexible planar coils. This article also presents the effect of skin contact with the flexible coil in terms of the power transfer efficiency (PTE) to validate the suitability as a wearable sensor.

Article describes study which sought to evaluate the efficiency of pilot water desalination system treating brackish water which was obtained mixing fresh water and seawater up to reach 1,500 mg L-1 of total dissolved solids (TDS) concentration.

Data management plan for the grant, "CAREER: Fundamental Limits of Cryptographic Primitives Through Network Information Theory." Research project studying the fundamental limits of a diverse array of cryptographic primitives through network information theory and coding tools. The project takes an information theoretic view of the investigation of the fundamental limits of cryptographic primitives. The project is expected to unveil theoretical and practical insights into cryptographic primitives, and enhance the understanding on their fundamental limits.

This article reports the design, fabrication, and characterization of an all inkjet-printed field-effect transistor (FET).

Article presents the large scale synthesis of solution-processed 2D (CH₃(CH₂)₃NH₃)₂(CH₃NH₃)ₙ − 1PbₙI₃ₙ + 1 (n = 2, 3, and 4) perovskites, a family of layered compounds with composition-tunable bandgap, where inkjet printing was used to fabricate heterostructure, flexible photodetector devices. The flexible, inkjet-printed perovskite 2D heterostructures have significant potential for optoelectronic devices, which can enable broad possibilities with compositional tunability and versatility of the organohalide perovskites.

This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological properties.

Article reporting on the inkjet printed, direct contact study of solution-processed, 2D perovskite-based photodetectors (PDs) formed on flexible PI substrates. Silver (Ag) and graphene (Gr) inks have been engineered to serve as efficient electrical contacts for solution-processed two-dimensional (2D) organo-halide (CH3(CH2)3NH3)2(CH3NH3)n−1PbnI3n+1 (n = 4) layered perovskites, where all inkjet-printed heterostructure PDs were fabricated on polyimide (PI) substrates.

This article presents dispersions of WS₂ and h-BN using cyclohexanone and terpineol as the solvent to subsequently print prototype capacitive nanodevices.

Article exploring phonon dynamics in mechanically exfoliated two-dimensional WSe₂ using temperature-dependent and laser-power-dependent Raman and photoluminescence (PL) spectroscopy. The work reported sheds fundamental insights into the evolution of phonon dynamics in WSe₂ and should help pave the way for designing high-performance electronic, optoelectronic and thermoelectric devices in the future.

This article describes the synthesis of indium tin oxide (ITO) thin films using solgel processing with a mixture of InCl₃, methanol, and SnCl₂, where the solutions were spin coated onto glass substrates. The combined architecture of black phosphorus on ITO thin films shows promise in its use for transparent electronics, which can also serve as a stepping stone for future solar cell platforms.

Data management plan for the grant "FY2021 DARPA YFA: Next generation of wireless power transfer network of Unmanned Aircraft System (UAS) using electromechanical beamforming." Research aiming to develop the next generation of wireless power transfer (WPT) network that is scalable, safe, and efficient and can be deployed in a UAS by incorporating waveform engineering, electromechanical beamforming, integrated phased-array antenna, and transmitter (TX)/receiver (RX) co-design. This project aims to reveal the fundamental understanding of the energy sphere formation in a 3D space using UAVs as a case study. Although interests in radiative (far-field) WPT using beamforming has been growing rapidly because of its capability to energize a large number of autonomous devices, most of these works are still in the theoretical phase without any practical implementation. This project aims to implement a robust beamforming network using a bottom-up approach (from the antenna to the inter-connected network) that is highly important for addressing the challenges associated with a dynamically changing environment.

This article explores various combinations of electrolyte concentrations, dielectrics, and dielectric thicknesses to generate maximum output power employing REWOD energy harvester with the objective of implementing a fully self-powered wearable sensor.

Article studying twistoptics for manipulating optical properties in twisted moiré photonic patterns without physical rotations. The presented approach can lead toward the study of twistoptics for the manipulating of optical properties in moiré patterns with different twist angles.

Article studying high light absorption in two devices: a stack of Au-pattern/insulator/Au-film and a stack of Au-pattern/weakly-absorbing-material/Au-film where the Au-pattern was structured in graded photonic super-crystal. Multiple-band absorption, including one near 1500 nm, in a stack of Au-pattern/spacer/Au-film was observed.

This article designs a novel coded caching scheme that outperforms uncoded caching schemes that either use unicast transmissions or let each user recover all files in the library. It extends the scope of the authors’ past work that only considered the class of linear functions that operate element-wise over the files.

Article establishing the feasibility of producing localized ablation zones using microsecond pulsed microwave ablation (MWA) as an alternative to conventional continuous wave (CW) MWA. Results open the opportunity for developing a coupled MWA treatment and imaging system using pulsed MWA and microwave-induced thermoacoustic signals for real-time monitoring of MWA.

This article focuses on practical computing systems with heterogeneous computing resources, and designs a novel CDC approach, called batch-processing based coded computing (BPCC), which exploits the fact that every computing node can obtain some coded results before it completes the whole task. The scheme demonstrates promising performance in terms of high computational efficiency and robustness to uncertain disturbances.

Article combining TIN with the topological interference management (TIM) framework that identifies optimal interference avoidance schemes and formulates a TIM-TIN problem for multilevel topological interference management, wherein only a coarse knowledge of channel strengths and no knowledge of channel phases is available to transmitters.

This article presents a power-efficient complementary metal-oxide-semiconductor (CMOS) neural signal-recording read-out circuit for multichannel neuromodulation implants.

Article studying 2D twisted moiré photonic crystals without physical rotation and simulating their photonic band gaps in photonic crystals formed at different twisted angles, different gradient levels, and different dielectric filling factors.

Article conducting a systematic study to tune the equimolar precursor ratio of the organic halide (methylammonium iodide; MAI) and metal halide (lead iodide; PbI2) in a fixed solvent mixture of N,N-dimethylformamide (DMF):dimethylsulfoxide (DMSO).

Article utilizing Raman spectroscopy and photoluminescence (PL) spectroscopy to analyze the phononic and electronic parameters in suspended bulk WSe₂ sheets, fabricated utilizing photolithography and wet chemical etching. The findings of this work will be beneficial in analyzing thermal, optical, and mechanical properties of WSe₂ in a suspended platform for its application in electronic, thermoelectric, and mechanical sensors in the future.

Data management plan for the grant "RINGS: Mobility-driven Spectrum-Agile Resilient mmWave Communication Links for Unmanned Aerial Vehicle Traffic Management in the Sky." As the unmanned aviation industry moves towards Advanced Air Mobility (AAM) services, air taxis and air ambulances are expected to become a reality in near future. Handling such a high volume of unmanned air traffic requires innovative solutions for enhanced situational awareness in the airspace. The US Federal Aviation Federal Aviation Administration envisions air tracks specifically reserved for AAM vehicles at altitudes ranging from 500 ft to 2000 ft. Air tracks cross one another at intersections and vehicles may need to share the airspace with other manned and unmanned aerial vehicles. This requires coordination among the vehicles especially during close encounters. Such a coordination requires highly reliable communication links which serve as a substitute for traffic signals on the roads. This proposal addresses this key knowledge gap by investigating strategies for establishing reliable and robust Vehicle-to-Vehicle (V2V) communication links to support AAM services. This project investigates spectrum-agile millimeter wave-based tunable beamforming strategies needed for establishing reliable and robust V2V communications links to support autonomous flight operations in air corridors along with the supporting radio frequency and mixed signal …