Degree Department
Degree Discipline
Degree Level
Country
Decade
762 Matching Results
Results open in a new window/tab.
A Comparative Quantitative Study of the Common Elements Found in the Post Oak and Willow
This thesis explores the chemical contents of post oak and willow trees. Samples of each tree are compared to determine the amount of sulfur, phosphorus, potassium, sodium, silicon, iron, aluminum, calcium, magnesium, and manganese in them. Results indicated usefulness of each tree to humans.
Date:
August 1939
Creator:
Clark, James L.
System:
The UNT Digital Library
Calcium Silicates: Glass Content and Hydration Behavior
Pure, MgO doped and B2C3 doped monocalcium, dicalcium, and tricalcium silicates were prepared with different glass contents. Characterization of the anhydrous materials was carried out using optical microscopy, infrared absorption spectroscopy, and X-ray powder diffraction. The hydration of these compounds was studied as a function of the glass contents. The hydration studies were conducted at 25°C. Water/solid ratios of 0.5, 1, 10, and 16 were used for the various experiments. The hydration behavior was monitored through calorimetry, conductometry, pH measurements, morphological developments by scanning electron microscopy, phase development by X-ray powder diffraction, and percent combined water by thermogravimetry. A highly sensitive ten cell pseudo-adiabatic microcalorimeter was designed and constructed for early hydration studies. Conductometry was found to be of great utility in monitoring the hydration of monocalcium silicate and the borate doped dicalcium silicates.
Date:
August 1987
Creator:
Zgambo, Thomas P. (Thomas Patrick)
System:
The UNT Digital Library
The Stereochemistry of Silenes and Alpha-Lithio Silanes
When E- or Z-l-methyl-l-phenyl-2-neopentylsilene was generated by the retro-Diels-Alder vacuum-sealed tube thermolysis of its corresponding anthracene adduct, in the presence of various alkoxysilanes, only one diastereomeric adduct was formed in each case, showing that the reactions are stereospecific. An x-ray crystal structure of the methoxytriphenylsilane adduct of the E-silene confirmed its relative configuration as (R,S) or (S,R). This demonstrated that the addition of alkoxysilanes to silenes is stereospecific and syn. The relative configurations of similar alkoxysilane and alkoxystannane adducts to E- and Z-l-methyl-l-phenyl-2-neopentylsilene were assigned based on a combination of xray structures and *3C NMR data. A strong, nonbonded oxygen-metal interaction is apparent in all of those compounds studied. Treatment of the alkoxystannane adducts with alkyl lithium reagents results in tin-lithium exchange in some cases. The results indicate that the resulting <x-lithio alkoxysilanes are not configurationally stable in either THF or hydrocarbon solvents. The reaction of tert butyl lithium with a-trimethylsilylvinylmethylphenylchlorosilane in hydrocarbon solvents yields E- and Z-l-methyl-l-phenyl-2-neopentyl-2-trimethylsilylsilene. In the absence of any traps these silenes undergo a novel tert butyl lithium catalyzed rearrangement to 2-phenyl-3-trimethylsilyl-5,5-dimethyl-2-silahex-3-ene. These silenes were also trapped as their [4+2] cycloadducts with anthracene. The Z-isomer of the anthracene adduct was separated and its stereochemistry confirmed by …
Date:
May 1987
Creator:
Bates, Tim Frank
System:
The UNT Digital Library
Electrodeposition of Diamond-like Carbon Films
Electrodeposition of diamond-like carbon (DLC) films was studied on different substrates using two different electrochemical methods. The first electrochemical method using a three-electrode system was studied to successfully deposit hydrogenated DLC films on Nickel, Copper and Brass substrates. The as-deposited films were characterized by scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FTIR) and cyclic voltammetry (CV). A variety of experimental parameters were shown to affect the deposition process. The second electrochemical method was developed for the first time to deposit hydrogen free DLC films on Ni substrates through a two-electrode system. The as-deposited films were characterized by Raman spectroscopy and FTIR. According to Raman spectra, a high fraction of diamond nanocrystals were found to form in the films. Several possible mechanisms were discussed for each deposition method. An electrochemical method was proposed to deposit boron-doped diamond films for future work.
Date:
August 2002
Creator:
Chen, Minhua
System:
The UNT Digital Library
Layered Double Hydroxides: Morphology, Interlayer Anion, and the Origins of Life
Access:
Use of this item is restricted to the UNT Community
The preparation of layered double hydroxides via co-precipitation of a divalent/trivalent metal solution against a base results in 1 mm LDH particles with a disorganized metal lattice. Research was performed to address these morphological issues using techniques such as Ostwald ripening and precipitation via aluminate. Another interesting issue in layered double hydroxide materials is the uptake and orientation of anions into the interlayer. Questions about iron cyanide interlayer anions have been posed. Fourier transform infared spectroscopy and powder x-ray diffraction have been used to investigate these topics. It was found that factors such as orientation, anion charge, and anion structure depended on the divalent/trivalent metal ratio of the hydroxide layer and reactivity time. The cyanide self-addition reaction is an important reaction of classical prebiotic chemistry. This reaction has been shown to give rise to amino acids, purines and pyrimidines. At cyanide concentrations similar to that expected on the early earth, hydrolysis to formamide rather than self-addition occurs. One theory to alleviate this side reaction is the use of minerals or clays that are thought to concentrate and catalyze prebiotics of interest. Layered double hydroxides have been studied as a catalyst for this reaction.
Date:
December 2002
Creator:
Halcom-Yarberry, Faith Marie
System:
The UNT Digital Library
NMR Study of n-Propyllithium Aggregates
A variable temperature 1H, 13C, and 6Li NMR study of n-propyl-6Li-lithium showed five different aggregates, similar to that in the literature as (RLi)n, n= 6, 8, 9, 9, 9. There were also a number of additional new species, identified as lithium hydride containing aggregates. Unexpectedly, a series of 13C{1H} 1-D NMR experiments with selective 6Li decoupling showed evidence for 13C-6Li spin-spin coupling between the previously reported (RLi)n aggregates and various hydride species.
Date:
December 2002
Creator:
Davis, James W.
System:
The UNT Digital Library
Kinetic Studies of Hydroxyl and Hydrogen Atom Reactions
Gas phase kinetics of the reactions involving hydroxyl radical and hydrogen atom were studied using experimental and ab initio theoretical techniques. The rate constant for the H + H2S reaction has been measured from 298 to 598 K by the laser photolysis/resonance fluorescence (LP-RF) technique. The transition state theory (TST) analysis coupled with the measurements support the suggestion that the reaction shows significant curvature in the Arrhenius plot. The LP-RF technique was also used to measure the rate constant of the H + CH3Br reaction over the temperature range 400-813 K. TST and density functional theory (DFT) calculations show that the dominant reaction channel is Br-abstraction. The reaction H + CF2=CF-CF=CF2 was first studied by flash photolysis/resonance fluorescence (FP-RF) method. The experiments of this work revealed distinctly non-Arrhenius behavior, which was interpreted in terms of a change in mechanism. DFT calculations suggest that the adduct is CF2H-CF•-CF=CF2. At lower temperatures a mixture of this molecule and CF2•-CFH-CF=CF2 is likely. The theoretical calculations show that H atom migrates in the fluoroethyl radicals through a bridging intermediate, and the barrier height for this process is lower in the less fluorinated ethyl radical. High level computations were also employed in studies of the …
Date:
May 2002
Creator:
Hu, Xiaohua
System:
The UNT Digital Library
Synthesis and characterization of molecules to study the conformational barriers of fluorocarbon chains
Fluorocarbons are known to be stiffer than their hydrocarbon analogues, a property that underlines the extensive industrial application of fluorocarbon materials. Although there has been previous studies on the rotational barrier of molecules having fluorocarbon centers, a detailed systematic study is necessary to quantify flurocarbon stiffness. The molecules, Pyrene-(CF2)n-Pyrene, Pyrene-(CF2)n-F, Pyrene-(CH2)n-Pyrene and Pyrene-(CH2)n-H were therefore synthesized to enable the determination of the barrier to rotation of the carbon backbone in fluorocarbons. Conformational studies will be completed with steady-state and time-dependent emission spectroscopy.
Date:
May 2000
Creator:
Niyogi, Sandip
System:
The UNT Digital Library
Adhesion/Diffusion Barrier Layers for Copper Integration: Carbon-Silicon Polymer Films and Tantalum Substrates
The Semiconductor Industry Association (SIA) has identified the integration of copper (Cu) with low-dielectric-constant (low-k) materials as a critical goal for future interconnect architectures. A fundamental understanding of the chemical interaction of Cu with various substrates, including diffusion barriers and adhesion promoters, is essential to achieve this goal. The objective of this research is to develop novel organic polymers as Cu/low-k interfacial layers and to investigate popular barrier candidates, such as clean and modified tantalum (Ta) substrates. Carbon-silicon (C-Si) polymeric films have been formed by electron beam bombardment or ultraviolet (UV) radiation of molecularly adsorbed vinyl silane precursors on metal substrates under ultra-high vacuum (UHV) conditions. Temperature programmed desorption (TPD) studies show that polymerization is via the vinyl groups, while Auger electron spectroscopy (AES) results show that the polymerized films have compositions similar to the precursors. Films derived from vinyltrimethyl silane (VTMS) are adherent and stable on Ta substrates until 1100 K. Diffusion of deposited Cu overlayers is not observed below 800 K, with dewetting occurred only above 400 K. Hexafluorobenzene moieties can also be incorporated into the growing film with good thermal stability. Studies on the Ta substrates demonstrate that even sub-monolayer coverages of oxygen or carbide on polycrystalline …
Date:
December 1999
Creator:
Chen, Li
System:
The UNT Digital Library
Explorations with Polycarbocyclic Cage Compounds
A variety of novel cage-functionalized pyridyl containing crown ethers have been prepared for use in selective alkali metal complexation studies. A highly preorganized, cage-functionalized cryptand also has been designed and has been synthesized for use as a selective Li+ complexant. The alkali metal picrate extraction profiles of these cage-functionalized crown ethers also have been studied. Novel cage-functionalized diazacrown ethers have been prepared for selective alkali metal complexation studies. Alkali metal picrate extraction experiments have been performed by using this new class of synthetic ionophores to investigate the effects of cage-annulation and the influence of N-pivot lariat sidearms upon their resulting complexation properties. Novel pyridyl containing calix[4]arene receptors were prepared. Analysis of their respective 1H NMR and 13C NMR spectra suggests that calix[4]arene moieties in the ligand occupy the cone conformation. The complexation properties of these host molecules were estimated by performing a series of alkali metal picrate extraction experiments. An optically active cage-functionalized crown ether which contains a binaphthyl moiety as the chiral unit was prepared. The ability of the resulting optically active crown ether to distinguish between enantiomers of guest ammonium ions (i.e., phenylethylamonium and phenylglycinate salts) in transport experiments was investigated. Hexacyclo[11.2.1.02,12.05,10.05,15.010,14]hexadeca-6,8-diene-4,11-dione was prepared from hexacyclo[7.4.2.01,9.03,7.04,14.06,15] pentadeca-10,12-diene-2,8-dione. Unanticipated …
Date:
August 1999
Creator:
Chong, Hyun-Soon
System:
The UNT Digital Library
The Performance of Silicon Based Sensor and its Application in Silver Toxicity Studies
The silicon based sensor is able to detect part per trillion ionic silver in 0.0098% hydrofluoric acid based on the open circuit potential (OCP) measurement. The OCP jump of 100 ppt ionic silver solution is up to 120 mV. The complex agent can effectively suppress the ionic silver concentration and suppress the OCP signal. The ability of complex agent to suppress the OCP signal depends on the formation constant of the complex with silver. The complex adsorbed on the sensor surface induces a second OCP jump, the height of the second jump depends on the formation constant of the complex. The MINEQL chemical equilibrium modeling program is used to calculate the ionic silver concentration when complex agent presents, a discrepancy is found between the MINEQL simulation result and the OCP signal of the silicon based sensor. The toxicity of ionic silver to C. dubia is studied parallel to the OCP signal of silicon based sensor. Less toxicity is found when the complex agent is present similar to the OCP signal. Another discrepancy is found between the MINEQL simulation and the toxicity test when MINEQL simulation is used to predict and control the ionic silver concentration. The data from both biosensor …
Date:
August 2000
Creator:
Peng, Haiqing
System:
The UNT Digital Library
Diffusion Barriers/Adhesion Promoters. Surface and Interfacial Studies of Copper and Copper-Aluminum Alloys
The focus of this research is to study the interaction between copper and the diffusion barrier/adhesion promoter. The behavior of copper sputter-deposited onto sputter-cleaned tantalum nitride is investigated. The data show that copper growth on tantalum nitride proceeds with the formation of 3-D islands, indicating poor adhesion characteristics between copper and Ta0.4N. Post-annealing experiments indicate that copper will diffuse into Ta0.4N at 800 K. Although the data suggests that Ta0.4N is effective in preventing copper diffusion, copper's inability to wet Ta0.4N will render this barrier ineffective. The interaction of copper with oxidized tantalum silicon nitride (O/TaSiN) is characterized. The data indicate that initial copper depositions result in the formation a conformal ionic layer followed by Cu(0) formation in subsequent depositions. Post-deposition annealing experiments performed indicate that although diffusion does not occur for temperatures less than 800 K, copper "de-wetting" occurs for temperatures above 500 K. These results indicate that in conditions where the substrate has been oxidized facile de-wetting of copper may occur. The behavior of a sputter-deposited Cu0.6Al0.4 film with SiO2 (Cu0.6Al0.4/SiO2) is investigated. The data indicate that aluminum segregates to the SiO2 interface and becomes oxidized. For copper coverages less than ~ 0.31 ML (based on a Cu/O …
Date:
August 2000
Creator:
Shepherd, Krupanand Solomon
System:
The UNT Digital Library
Substituent Effects: A Computational Study on Stabilities of Cumulenes and Low Barrier Hydrogen Bonds
Access:
Use of this item is restricted to the UNT Community
The effect of substituents on the stabilities of cumulenes-ketenes, allenes, diazomethanes and isocyanates and related systems-alkynes, nitriles and nitrile oxides is studied using the density functional theory (B3LYP, SVWN and BP86) and ab initio (HF, MP2) calculations at the 6-31G* basis set level. Using isodesmic reactions, correlation between stabilization energies of cumulenes and substituent group electronegativities (c BE) is established and the results from DFT and MP2 methods are compared with the earlier HF calculations. Calculations revealed that the density functional methods can be used to study the effect of substituents on the stabilities of cumulenes. It is observed that the cumulenes are stabilized by electropositive substituent groups from s -electron donation and p -electron withdrawal and are destabilized by electronegative substituent groups from n-p donation. The calculated geometries of the cumulenes are compared with the available experimental data.High level ab initio and density functional theory calculations have been used to study the energetics of low-barrier hydrogen bond (LBHB) systems. Using substituted formic acid-formate anion complexes as model LBHB systems, hydrogen bond strength is correlated to the pKa mismatch between the hydrogen bond donor and the hydrogen bond acceptor. LBHB model systems are characterized by the 1H-NMR chemical shift calculations. …
Date:
August 2000
Creator:
Kumar, Ganesh Angusamy
System:
The UNT Digital Library
Determination of Molecular Descriptors for Illegal Drugs by Gc-fid Using Abraham Solvation Model
The Abraham solvation parameter model is a good approach for analyzing and predicting biological activities and partitioning coefficients. The general solvation equation has been used to predict the solute property (SP) behavior of drug compounds between biological barriers. Gas chromatography (GC) retention time can be used to predict molecular descriptors, such as E, S, A, B & L for existing and newly developed drug compounds. In this research, six columns of different stationary phases were used to predict the Abraham molecular descriptors more accurately. The six stationary phases used were 5% phenylmethyl polysiloxane, 6% cyanopropylphenyl 94% dimethylpolysiloxane, 5% diphenyl 95% dimethylpolysiloxane, 100% dimethylpolysiloxane, polyethylene glycol and 35% diphenyl 65% dimethylpolysiloxane. Retention times (RT) of 75 compounds have been measured and logarithm of experimental average retention time Ln(RTexp) are calculated. The Abraham solvation model is then applied to predict the process coefficients of these compounds using the literature values of the molecular descriptors (Acree Compilation descriptors). Six correlation equations are built up as a training set for each of the six columns. The six equations are then used to predict the molecular descriptors of the illegal drugs as a test set. This work shows the ability to extract molecular information from …
Date:
December 2013
Creator:
Akhter, Syeda Sabrina
System:
The UNT Digital Library
Substitution Effects of Phenothiazine and Porphyrin Dyes in Dye-sensitized Solar Cells
The details of dye sensitized solar cells was explained and phenothiazine and porphyrin based dyes were synthesized for use in DSSCs. DSSCs offer a unique and cost effective method of renewable energy. DSSCs are characterized through various tests, with the overall efficiency, η, bearing the greatest importance. Incident photon to current conversion efficiency, or IPCE, is also another important characterization of DSSCs. Effect of positioning of the cyanoacrylic acid anchoring group on ring periphery of phenothiazine dye on the performance of dye sensitized solar cells (DSSCs) is reported. The performances of the cells are found to be prominent for solar cells made out of Type-1 dyes compared to Type-2 dyes. This trend has been rationalized based on spectral, electrochemical, computational and electrochemical impedance spectroscopy results. Free-base and zinc porphyrins bearing a carboxyl anchoring group at the para, meta, or ortho positions of one of the meso-phenyl rings were synthesized for DSSCs. Photoelectrochemical studies were performed after immobilization of porphyrins onto nanocrystalline TiO2. The performance of DSSCs with the porphyrin anchoring at the para or meta position were found to greatly exceed those in the ortho position. Additionally, zinc porphyrin derivatives outperformed the free-base porphyrin analogs, including better dye regeneration efficiency …
Date:
December 2013
Creator:
Hart, Aaron S.
System:
The UNT Digital Library
Studies on the Porphyrin and Phthalocyanine Modified on Sno2 Photoelectrochemical Cells
The world is facing a tough challenge regarding fulfilling human energy needs. Scientists are motivated to find alternative ways to the fossil fuel at a lower cost with little or no environmental pollution. Among the available renewable resources, the solar energy is an alternative energy to fossil fuel. Scientists are engaged in mimicking the photosynthesis to create the new energy devices such as dye sensitized solar cells. The fundamental theory and properties of the dye sensitized solar cells is given in the first chapter. In this research, the application of the different methods for surface alteration of SnO2 with water soluble porphyrins and phthalocyanine is studied. Using optical absorbance and steady state fluorescence studies, the formation of porphyrins and phthalocyanine discuss on the SnO2 surface is shown. Moreover, the different results of photoelectrochemical cells are show on chapter 2 to understand the porphyrin and phthalocyanine modified on SnO2 as electron injector. In summary, the application porphyrin and phthalocyanine of dimers as a broad band capturing photosensitized dye is discussed.
Date:
December 2013
Creator:
Lin, Chunyu
System:
The UNT Digital Library
Studies on High Potential Porphyrin-fullerene Supramolecular Dyads
Photoinduced electron transfer in self-assembled via axial coordination porphyrin-fullerene dyads is investigated. Fullerene functionalized with imidazole and fullerenes functionalized with pyridine are chosen as electron acceptors, while zinc pophyrin derivatives are utilized as electron donors. The electron withdrawing ability of halogen atoms make the porphyrin ring electrophilic, which explained the binding of (F20TPP)Zn with fullerene derivatives having the highest binding constant around 105M-1. Another important observation is that the fullerene imidazole binding to zinc pophyrin had higher stability than fullerene pyridine-porphyrin dyad. Computational DFT B3LYP-21G(*) calculations are used to study the geometric and electronic structures. The HOMO and LUMO was found to be located on the porphyrin and fullerene entities, respectively. Photoinduced electron transfer is investigated by the steady-state absorption and emission, differential pulse voltammetry, and nanosecond and femtosecond transient absorption studies. The measurements provided the same conclusion that the increasing number of the halogen atoms on the porphyrin ring leads to the higher binding of porphyrin-fullerene supramolecular dyads and efficient charge separation and charge recombination processes.
Date:
December 2013
Creator:
Song, Baiyun
System:
The UNT Digital Library
Photophysical properties of pyrene, 2,7 diazapyrene and 1,3-bis(β-naphthyl)propane.
The luminescence properties of Van Der Waals' dimers and clusters of pyrene and diazapyrene have been investigated. Excimers, dimeric species which are associative in an excited electronic state and dissociative in their ground state, have long been established and play an important role in many areas of photochemistry. My work here focuses on the luminescence and absorption properties of ground state dimers/aggregates, which are less understood, and allows further characterization of the ground state and excited state association of these aromatic molecules.
Date:
August 2007
Creator:
Boateng, Stephen
System:
The UNT Digital Library
Stereochemical Elucidation Of The Tetrahydro [2.2]paracyclophane System
The purpose of this investigation is to study the Birch reduction products of [2.2lparacyclophane and of [2.2]paracyclophane- 2-carboxylic acid. The tetrahydro Birch reduction product of [2.2]paracyclophane is shown to be dl stereoisomer, with the olefins of the upper deck only partially overlapping with the olefins of the lower deck. This stereochemical elucidation is accomplished by means of a complete proton nmr analysis of the tetraepoxide derivative. A proposed mechanism supported by VB (valence bond) and MO (molecular orbital) theories for this Birch reduction process is presented.
Date:
August 1975
Creator:
Song, Ban-Huat
System:
The UNT Digital Library
Separation of Transition Metal Ions by HPLC, Using UV-VIS Detection
HPLC has been used and can quickly determine several ions simultaneously. The method of determination described for transition metals [Cr(III), Fe(III), Ni(II), Co(II), Cu(II), Zn(II), Cd(II), Mn(II)] and [Ca(II), Pb(II)] using HPLC with UV-VIS detection is better than the PAR complexation method commonly used. The effects of both eluent pH and detector wavelength were investigated. Results from using different pHs and wavelengths, optional analytical conditions for the separation of [Ni(II), Co(II), Cu(II)], [Cr(III), Fe(III), Ca(II), Ni(II), Cu(II)], and [Ca(II), Zn(II), Pb(II)] in one injection, respectively, are described. The influence of adding different concentrations of Na_2EDTA solvent to the sample is shown. Detection limits, linear range, and the comparisons between this study and a post-column PAR method are given.
Date:
August 1987
Creator:
Lien, Wan-Fu
System:
The UNT Digital Library
Synthesis, Structure, and Solution Dynamics of Co₄(CO)₈(dmpe)(mu₄-PPh)₂
Reaction of the tetracobalt cluster Co4(CO)10(t 4-PPh)2 with 1,2-bis(dimethylphosphino)ethane (dmpe) affords the bis-substituted cluster Co4(CO)8(dmpe)(t 4-PPh)2. The bidentate dmpe ligand is shown to bind to the cluster in a chelating fashion by IR, NMR, and X-ray diffractions analyses. The fluxional nature of the ancillary carbonyl groups has been studied by variable temperature 13C NMR measurements which reveal two distinct carbonyl scrambling pathways. The stability of the phosphine-ligated cluster has been examined using in situ Cylindrical Internal Reflection (CIR) Spectroscopy. The effect of the dmpe ligand on the cluster polyhedron will be discussed with respect to the observed crystallographic and spectroscopic results
Date:
May 1990
Creator:
Schulman, Cheryl Lutins
System:
The UNT Digital Library
Trace Elemental Analysis of Ashes in the Combustion of the Binder Enhanced d-RDF by Inductively Coupled Plasma Atomic Emission Spectroscopy
Incineration is an attractive solution to the problems of disposing of municipal solid wastes and supplying energy. Because up to 25 percent of the waste in refuse-derived-fuel systems is ash, the physical and chemical characteristics of ash become more and more important for its potential impacts and methods suitable for their disposal. Trace elements concentration in ash is of great interest because of its relationship to regulatory criteria under the Resource Conservation and Recovery Act (RCRA) regarding toxicity and hazards. The applications of a microwave oven sample dissolution method has been tested on a variety of standard reference materials, with reproducible and accurate results. Fourteen trace elements, As, Ba, Be, Cd, Cr, Cu, Hg, Ni, Pb, Sb, Se, Tl, V, and Zn, from the dissolved ash samples were determined by inductively coupled plasma atomic emission spectrometry.
Date:
November 1988
Creator:
Tai, Chia-Hui
System:
The UNT Digital Library
The Synthesis and Reactivity of Bis(silyl)acetylenes
Six bis(silyl)acetylenes with the following varied silicon substituents were prepared: I (Me, Me); II (H, H); III (Cl, H); IV (Cl, Cl); V (OMe, H); VI (OMe, OMe). While I and II may be prepared by the reaction of dilithio- or bis(bromomagnesium)-acetylide with appropriate chlorosilane, similar reactions designed to give III - VI give oligomers, YMe_2Si(C≡C-SiMe_2)_nY, VII, Y = Cl, OMe, as the major products indicating that the acetylenic functionality on silicon activates the chlorosilane toward nucleophilic substitution. Compounds III and IV were prepared by free radical chlorination of II. Methanolysis of III and IV gave quantitative yields of V and VI, respectively. In the presence of mineral acid, VI readily cyclized to give high yields of the cyclic siloxane octamethyl-4,9-dioxa-3,5,8,10-tetrasila-cyclodeca-1,6-diyne, VIII, and the analogous triyne, IX. It was determined that V and VI could be prepared directly from II in high yield by methanolysis with palladium catalyst. Vaska's complex also accomplished the conversion. I attempted to prepare bis(ethoxydimethylsilyl)acetylene by using of Wilkinson 's catalyst for hydrosilylation with acetaldehyde. The principal product of this reaction was 1-(dimethylsilyl)-3,5,5-trimethyl-4-oxa-3-silacyclopent-1-ene, XI.
Date:
May 1987
Creator:
Albanesi, Todd E. (Todd Edward)
System:
The UNT Digital Library
Ion Chromatography of Soluble Cr(III) and Cr(VI)
Ion chromatography coupled with a conductivity detector was used to investigate the analysis of Cr(III) and Cr(VI) in aqueous samples. An IC methodology for Cr(III) was developed using a cation column and an eluent containing tartaric acid, ethylenediamine, and acetonitrile at pH 2.9. The detection limit of this method can reach 0.1 ppm level with good precision. Several operational parameters were evaluated during the regular use of the method. Comparison of the IC method with AA method showed good agreement between the two methods. The anion exchange column was used for Cr(VI) determination. The best results were obtained with an eluent containing sodium gluconate, borate buffer, glycerin, and acetonitrile. The retention time for the Cr207 2 - sample was 11 min. and the calibration curve was linear between 1.0 and 100 ppm.
Date:
August 1988
Creator:
Huang, Julie Shiong-Jiun
System:
The UNT Digital Library