"A series of glass compositions containing uranium oxide was investigated to determine fiberizability and physical properties of resultant fibers. The basic properties to be determined were the maximum U/sub 3/O/sub 8/ content in a fiberizable glass and the maximum service temperature of the fibers. Glasses containing 60 wt% U/sub 3/O/sib 8/ were fiberizable; the fibers had strengths of 100,000 psi at 1600 deg F. Fiber-forming equipment was installed at Moun Laboratory to produce glass fibers containing PuO/sub 2/. Fibers were successfully formed in the first trials. For additional work a series of base glasses were provided affording a wider range of both PuO/sub 2/ solubility and physical properties."

"lsotope dilution techniques are described for the assay of chlorinated hydrocarbon pesticides and organic phosphorus pesticides in foods. Results are given for the determination of tetranitro-DDT-dianilide, dianilide of tetranitro- DDE, dieldrin, systox, and derivatives of these compounds. "

"As presented in the original proposal the project consisted essentially of three parts: Phase I, Development and refinement of a radiochemical flow counting technique for the study of kinetics of reactions in solution ; Phase II, The application of this technique to the detailed study of the mechanism of solvolysis of sulfonium salts in mixed solvents ; Phase II, The further application of this kinetic technique, as a longer term aim, to other reacting systems of biochemical or other interest. This report covers the work of the contractual period 1 Sept. 1959 to 31 Aug. 1960."

This report describes the design, construction and operation of a sub-critical nuclear reactor, intended for college teaching of reactor physics and of nuclear phenomena.

The study which has been carried out under Contract AT(30-1)2477 has as its objective the review of all work which has been done on the application of radionuclear techniques to research in water resources and supply, the evaluation of this work, and the suggestions of specific experiments which must be performed if these applications are to be extended.

Tests were conducted to determine the friction factor of randomly packed beds of 3/4-inch diameter spheres in 8-inch and 15-1/4-inch diameter beds, and of 1-1/2-inch diameter spheres in 15-1/4-inch diameter bed. The bed depths were varied in an attempt to isolate the effects of entrance and exit losses. The bed Reynolds number, base on sphere diameter, was varied from 5,000 to 50,000.

"A comparison of the grafting of a 2:1 molar mixture of methacrylic acid and styrene to both polypropylene film and fabric using CO60 source and electron accelerator as sources of ionizing radiation is made on the basis of mutual or simultaneous grafting and post-irradiation grafting.

"Rates of acetylene polymerization induced by Kr/sup 85/ in d-c fields were up to 15 times greater than those observed when no fields were imposed. Work to determine the relations between acetylene pressure, Kr/sup 85/ concentration, and the field intensity is continuing. In other activities, equipment is being designed to study the effects of megacycle electric fields on radioinduced chemical reactions."

""Progress is reported on: design of a continuous flow system for the irradiation of silane using a Cos5 source; pile irradiation of silane samples at elevated temperatures; investigation of materials other than silane, including nonsilicon compounds as well as those containing the silyl group; modification of the existing vacuum system for handling larger quantities of silane as well as increasing the accuracy of the pressure measurements; and use of an electric discharge for the decomposition of silane. Studies were continued on the radiation- and thermalinduced decomposition of sikane at 325 and 350 deg C. A preliminary value of G= 33 was obtained for silane."

"Progress is reported on: design of a continuous flow system for the irradiation of silane using a Cos5 source; pile irradiation of silane samples at elevated temperatures; investigation of materials other than silane, including nonsilicon compounds as well as those containing the silyl group; modification of the existing vacuum system for handling larger quantities of silane as well as increasing the accuracy of the pressure measurements; and use of an electric discharge for the decomposition of silane. The work performed during the period of this report consisted of the following: 1. Preparation of samples of trichlorosilane and hydrogen and subsequent thermal and irradiation studies, and analysis of these samples. 2. Preparation of mixed samples of silane and argon and subsequent thermal and irradiation studies and and analysis. 3. Outlining of future investigations to be conducted on this project."