This bibliography contains 37 references on self-shielding cross sections. The bibliography is limited to the period from 1951 through November 1959 with the references arranged alphabetically by title. The sources used in compiling this bibliography were: Abstracts of Classified Reports Nuclear Science Abstracts

The Atomic Energy Commission has assigned the Hanford Atomic Products Operation the responsibility of providing the technology and facilities for the interim reprocessing of slightly enriched uranium fuels discharged from power and propulsion reactors. The fuel from the various reactors vary greatly in physical dimensions and in the composition of the core and cladding. For the purposes of chemical reprocessing, the fuels may be divided into the three main categories of aluminum, Zircaloy or stainless steel clad elements. The fuels may be sub-divided by the nature of the core material; e.g. metallic uranium, uranium dioxide, uranium-molybdenum alloys uranium-aluminum alloys, etc.

For purposes of an earlier consideration of the effects of in-reactor test loops on PRTR operation and program, the design of the high pressure, H20 cooled fuel test loop was assumed to be similar to that for the high pressure, gas cooled loop. Detailed design criteria for the H20 loop have recently been completed so that this assumption is no longer necessary. Therefore, to insure that the effects of all proposed in-reactor loops are fully evaluated with respect to Plutonium Recycle Program objectives, the present study has been carried out. Much of the qualitive discussion in the original analysis is still considered valid. Thus, rather than repeating the entire analysis as it pertains to the H20 loop, only those departures resulting from differences between the assumed design and the scope design are presented.

Disposal of liquid radioactive wastes to ground requires knowledge of the area ground-water hydrology. Information is desired on direction and velocity of ground-water flow. Direction of flow can be determined from maps showing contours on the water table surface, such contours being derived from well water elevations. Ground-water velocity is more difficult to ascertain.

"This bibliography lists selected articles on beryllium which have appeared in journals received in the library of the Lawrence Radiation Laboratory, Livermore, California and articles, reports, and books which have appeared in the following abstracting services between January, 1958 and August 1959."

An experiment was designed utilizing a charge-exchange reaction to study the decay and interactions of the neutral K mesons produced. The experiment produced no events that could be interpreted as either the decay or interaction of neutral K mesons. The nature of the experiment and the possible explanations of this unexpected result are presented in this paper.

In another paper there was reported an attempt to observe the charge-exchange process in a counter-triggered multiplate cloud chamber at the Bevatron but the interpretation was ambiguous. Shortly after the close of that experiment the 30-in. propane bubble chamber at the Lawrence Radiation Laboratory was completed and able to be used for a combined engineering test and experiment. The existence of Reaction (1) has been confirmed in this experiment, and an approximate cross-section value for carbon is calculated.

In the preliminary stages of getting up a time-of-flight system for measuring neutron spectra from proton reactions, a study of the time dependence of the beam in the 86Inch Cyclotron was made. This study revealed the expected bunching of the protons to produce a short burst of beam on each cycle of the 13.4 Mc/s accelerating voltage. In addition to the 13.4 Mc/s structure, however, there was a 360 c/sec modulation of the beam pulses and a complicated pattern built upon that.

Either system appears to be fairly satisfactory from a containment standpoint. Current results indicate probable over-all rates of about 0.2mils/mo for titanium vs. 1.5-3.0 mils/mo for Ni-o-nel. Tests are not 100% comparable due to changes made in flowsheet conditions, but have been of sufficient variation and length as to allow good predictions to be made. Both metals show some tendency toward local attack in Thorex solutions. These tendencies are increased by poor welding techniques.

Equilibrium loading of uranium on Dowex 21K has been studied in a sulfate system for uranium concentrations from 0.0005 M to 0.0005 M, total sulfate concentrations of 0.45 M to 0.6M, and sulfuric acid concentration of 0.020 M. Loading data have been fitted to Langmuir adsorption isotherms and Langmuir constants have been evaluated. Resin was equilibrated with uranium feed solutions by flowing the feed through a shallow fixed bed of resin.

The apparatus and procedures that are to be used to fill the liquid metal system of the Pratt and Whitney Forced Convection Liquid Metal Inpile Loop are described. The liquid metal to be used is a mixture containing 56% Na and 44% K, which is a liquid at room temperature. In order to simplify the filling procedure at the reactor site, two containers, each of which contains exactly enough liquid metal to fill the experiment to the prescribed level, a fill dolly incorporating a purified helium system, and an evacuation system will be provided at the reactor site. After completion of the liquid metal transfer, the liquid metal fill tube will be crimped, cut, and seal welded. The liquid metal and helium systems will then be pressurized through the helium fill tubes, which will also be crimped, cut, and seal welded. Each tube seal weld will be inspected after completion of the weld by mass spectrometry leak check and dye penetrant fault detection

The following report presents neutron-flux measurements made with a concentric-cylinder element (Mark II) and includes axial, radial, and peripheral flux distributions.

This report follows ciritical-assembly studies on: the effect on reactivity caused by changes in axial reflector materials; the effect on reactivity and the power perturbation caused by fast safety control-blade guides; the effect of changes in fuel-element material composition; the effect of changes in fuel-elements spacing designed to produce uniform radial power-generation rates.

Abstract: "An absolute measurement of the 14.1-Mev (n, 2n) cross sections of Li-6 and Li-7 has been made using the large scintillator technique, resulting in cross sections in barns of 0.070 +/- 0.006 and 0.056 +/- 0.005 for Li-6 and Li-7, respectively."

This report focuses on the study of the stabilized pinch program made to increase the plasma temperature and improve the plasma conductivity and containment. One method proposed is the usage of a large toroidal stabilized pinch, which is described here.

The leak detector system consists of one gas pressurized reservoir containing heavy water, a tubing manifold connecting the pressurizer to six separate lines each connected to one of the flanges, tubing lines leading from the second hole on each of three flange pairs (dome and heat exchanger flanges) back into the instrument room, plus required valves and fittings. A schematic diagram of the system in included.

It is concluded that an excess of O2 must be added to the HRT fuel circulating stream in amounts sufficient to recombine the D2 in dead-end lines and serve as corrosion protection.

A preliminary study of molten salt power reactors was made. The most promising fuel carrier salts were the fluorides and chlorides of the alkali metals, zirconium, and beryllium. The chlorides were found to have lower melting points but were less stable and more corrosive than the fluorides. A Li/sup 7/ F- - BeF/sub 2/ mixture with ThF/sub 4/ and UF/sub 4/appeared to perform best. Of the numerous alloys tested as container material, Inconel and a nickel-- molybdenum alloy INOR-8 appeared to be the most resistant to corrosion. To study the performance, safety, economics, and construction costs of a typical molten salt reactor, a reactor of specific type and size was chosen for study. The reference design reactor was a two-region homogeneous converter with a core salt of 70 mole% Li/sup 7/F and 30% BeF/sub 2. ThF/sub 4/ and enough VF/sub 4/ for criticality were added. Study indicated that a molten salt reactor would produce economical power, but the problem of developing a salt core and a container metal which would last for many years of operation needed further study. (M.C.G.)

Run SM-2 was run to determine whether a sulfated ThO2 slurry could be handled in a hydrodynamic system similar to the HRT test blanket. It was found that the ThO2 concentration circulating in the pipes was consistently 50% or less of the expected concentration based on the quantity of the oxide changed. The run lasted 1730 hours. It was terminated because of a slurry leak a few days before a shutdown had been scheduled. Severe erosion was found in the pump impeller and flow nozzle . Chloride concentration high enough to cause concern over possible stress corrosion cracking occurred on several occasions in the pressurizer.

Catalysts for use in recombining the gases produced by the radiolytic decomposition of water in thorium oxide slurries under neutron irradiation were investigated in out-of-pile tests using stoichiometric mixtures of hydrogen and oxygen. Most favorable results were obtained with a molybdenum oxide catalyst. Satisfactory rate also were attained with palladium and silver oxides. Copper, nickel, vanadium and chromium compounds were less effective.

A promising scheme for the chemical processing of a thorium breeder reactor of the two-region aqueous homogeneous type consists of the following operations: concentration of insoluble fission and corrosion products from the core system into a small volume of fuel solution, combining this slurry with irradiated thorium oxide slurry taken from the blanket, recovery of D2O by evaporation, dissolution of the thorium and uranium in HNO3, and, after a suitable cooling period, recovery of the uranium and thorium by solvent extraction for return to the reactor. The use of a hydroclone and underflow container arrangement for concentrating insoluble fission and corrosion products under simulated reactor conditions has been successfully demonstrated on dynamic loops. Solids concentration factors greater than 103 were demonstrated, and equilibrium solids concentration in the circulating solution less than 1 ppm was attained in these tests. Present data indicate that proper design and operation will minimize solids deposition in the reactor system and that the insoluble impurities can be effectively removed by the hydroclone. An alternate method of processing the slurry removed from the core system by the hydroclone consists of removing the room temperature insolubles by centrifugation, recovering the uranium from the supernatant by peroxide precipitation, thermal …

When it was discovered that two HRT flange bolts of a lot of 16 spares contained serious cracks, a program was launched to (1) determine the cause for the cracking, and (2) find methods for non-destructive testing the remainder of the 672 bolts shipment, a large portion of which had been installed in the HRT. Concurrently, inspection of 8 ferrules removed from an HRT flange revealed hairline cracking in 4 of them. Magnaglo, a magnetic particle inspection method using a fluorescent dye, proved to be the only definitive method for inspecting the bolts. The evidence gathered on the bolts pointed to quench cracking as the cause for the defects. Nothing abnormal was disclosed in regard to the bolt material. The alloy and heat treatment at present prescribed for the HRT bolts and ferrules are considered suitable. However, recommendations are made for plating with zinc, instead of formerly prescribed cadmium, to a thickness of 0.0002 inch, followed by a hydrogen relief treatment and a final bichromate chemical dip.

The feasibility of determining particle sizes in the submicron range by employing an activation analysis - centrifugation method has been demonstrated. It is believed that this method is now applicable to the analysis of thorium oxide for submicron particles. The same techniques are, in most instance, usable in determining particle sized in other sample materials.

An inconel loop circulating fluoride fuel (62 1/2 make [unintelligible] NaF, 12 1/2 make [unintelligible] ZrF4, 25 make [unintelligible] UF4, 92 [unintelligible] enriched) was operated at 1485°F with a temperature difference of about 35°F in the Low Intensity Test Reactor for 645 hr. For 475 hr of this time the reactor was at full power, and fission power generation in the loop was 2.7 kw, with a max length power density of 0.4 kw/cc. The total volume of fuel was 1290 cc (5.o kg [unintelligible] and the the flow through the irradiated section was 8.6 fps (Reynolds number 5500). The loop has been disassembled and has been examined by chemical and metallographic analyses. Ne acceleration of corrosion of decomposition of fuel by irradiation was noted, although deposition of fission-product ruthenium was absorbed. Ne mass transfer of Inconel was formed, and the corrosive [unintelligible] was general and relatively light. The average corrosive generation, in the usual form of subsurface yields, was 0.5 [unintelligible], the maximum penetration was 2 to 3 miles.