Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."

Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."

"An experiment to determine the effect of reactor irradiation on the thermal conductivity of uranium-impregnated graphite at elevated temperatures as described. The results show a decrease in the thermal conductivity saturating at [approximately] 60 percent at a temperature of 700 degrees C; at [approximately] 50 percent at a temperature of 1000 degrees C; and at [approximately] 25 percent at a temperature of 1300 degrees C. It was found that after irradiation at a given temperature, exposure at a higher temperature resulted in an increase in the thermal conductivity. The converse was also observed. Within the precision of measurement there was no difference in effed between temperature changes produced by varying the fission rate in the samples and changes produced by varying the power in an external heater."

Abstract: "An absolute measurement of the 14.1-Mev (n, 2n) cross sections of Li-6 and Li-7 has been made using the large scintillator technique, resulting in cross sections in barns of 0.070 +/- 0.006 and 0.056 +/- 0.005 for Li-6 and Li-7, respectively."

Abstract: This discussion concerns the operation, construction, and servicing of an alpha rate meter of medium sensitivity (30,000 alpha particles full scale per minute) and good stability. The instrument is equipped with an oscillator which increases both in frequency and loudness as the alpha activity is increased. The oscillator circuit includes an anticipator which causes a change in frequency depending directly upon the rate of change of alpha activity. Maximum sensitivity is approximately 100 millivolts full scale. Grid current varies from 1 to 5 x 10^-14 amperes. A general discussion of time constants and accuracy is included. Tables of stopping power, ionization and alpha activity are appended.

Abstract: The experimentally determined exponential dependence of spontaneous fission rate on Z^2/A has been used to derive an expression for the dependence of the fission activation energy on Z^2/A. This expression has been used to calculate the activation energy for slow neutron induced fission and photofission. The correlation with the experimental data on these types of fission seems to be quite good.

The following report provides information conducted with the purpose of ascertaining the effect of oxygen on activated charcoal at approximately one atmosphere by measuring the amount of CO2 formed over a known length of time.

From introduction: The present report is a summary of the experimental work on a laboratory scale to date involving the ammonia reduction and the one step TF4 processes.

"These notes are intended to serve as a summary of the current knowledge of properties of materials. In the future some need may exist for related information of methods of testing, design and fabrication. This issue presents information on low tin-zirconium alloys with subdivision..."

Abstract: "Variations in receiver slot design produce changes in quantity and quality of product and recycle, not only instantaneously, but also as a function of time in approaching equilibrium. The case of fixed feed concentration and fixed inventory of Uranium is described here for standard and Dip-Lip wider R slot receivers. The effects of the two types of receivers on recycle and product X and W concentrations, X production rate, plant X utilization efficiency, integrated X production and effective mass output are shown graphically."

Technical report. Quite pure anhydrous ThCl4 in small quantity (8-10 g charge) has been prepared by the action of a mixture of Cl2 and CCl4 vapor on ThO2 at 675 degrees to 725 degrees C.

"The influence of compressive creep on the self-diffusivity of α-iron has been measured in the temperature range of 742-885°C. the diffusivity is enchanced in proportion to the strain rate, but this dependence decreases with increasing temperature. The magnitude of the strain is relatively unimportant in this connection. Strain rates from 0 to -2 x 10¯³ sec¯¹ were investigated with a corresponding increase in diffusivity up to 3 x 10³ times. The results are analyzed in terms of vacancy diffusion and the excess vacancies introduced during deformation. It is concluded that grain boundaries are the main vacancy sinks in polycrystalline iron and that the vacancy lifetime is therefore dependent on the grain size."

"The purposes of the program being conducted under the present contract are: 1) To determine the feasibility of cladding zirconium on uranium by a direct casting process. 2) To investigate the diffusion of liquid metals in the fusion zone."

A theoretical analysis of the thickness vibrations in long thin rods of barium titanate is presented. The theoretical results are checked experimentally and their meaning discussed.