Abstract:"The creep resistance of various uranium binary alloys was investigated at 1500 and 1800 F in vacuum. Tests were made on alloys of uranium with beryllium, columbium, molybdenum, tantalum, titanium, and zirconium and on molybdenum-UO2 composites. Of the alloys examined, those of the uranium-molybdenum system exhibited the best creep resistance. At 1500 F, creep rates of about 0.005%/hr were produced in uranium-molybdenum alloys by a stress of 2500 psi and, at 1800 F, similar creep rates were obtained in composites of 90 wt % molybdenum-10 wt % UO2 by a stress of 12,000 psi."

The operation of the Fast Reactor is considered in terms of normal equilibrium conditions and normal shut-down. The proposed loading, control rod adjustment and subsequent "floating" operation are discussed. Safety devices and interlocks are described. Temperature and reactivity changes are examined with respect to various system failures, phase changes, and "flashing" of the reactor. Slow changes due to faulty slug cooling are also considered. The calculations were initially based upon 10 kw operation. Performance tests of the mercury system now indicate that 20-kw operation may be feasible.

Report discussing studies regarding properties of the zirconium-uranium epsilon phase related to stability and existence range. Data showing this phase's thermodynamic stability is presented as well as the zirconium-uranium constitutional diagram. Oxygen and nitrogen effects on zirconium-uranium alloys and epsilon-phase alloys is included as well as ternary zirconium-uranium-oxygen diagrams.

From introduction: "This brief paper deals with the subject of radial temperature differences for heat transfer to fluids flowing through concentric annuli under the following conditions and assumptions: a. constant heat flux; b. fully-established turbulent flow; c. heat transfer through inner wall only; d. physical properties independent of temperature."

Abstract: A visualized electron beam has been reflected by a conventional magnetic mirror. Visualization of the beam path from the electron gun to and including the region of reflection was achieved by the "thread ray" technique of Wehnelt. The total current passing through a magnetic mirror has been measured as a function of the beam energy and angular momentum for H₂ over a range of pressures from 0.5 to 5 microns.

Thesis discussing the relative yield of neutral pions from elements in a reaction "as a function of the quantum-limit energy (the maximum energy of the quanta in the bremsstrahlung beam) of the Berkeley synchrotron." Interpretation of the results leads to values for the mean free path for absorption of the neutral pions in nuclear matter.

The following report describes a gaseous scintillation counting system, including the production and operation of the counter.

Introduction: "It is the purpose of this note to describe the construction and operation of the plasma injectors used in the magnetic high compression experiments in progress at the Lawrence Radiation Laboratory at Livermore. As the investigations of these injections is still in progress, remarks concerning their operation or the characteristics of the injected plasma are of a tentative nature."

The second volume of a report documenting the suitability of Illinois for plant locations to produce synthetic liquid fuels, based on raw materials.

Report documenting the suitability of Oregon for plant locations to produce synthetic liquid fuels, based on raw materials, water sources, and local interest.

Memorandum presenting force-oscillation tests made in the 8-foot transonic pressure tunnel to investigate some effects of an overhang-type aerodynamic balance and of a flow spoiler on the dynamic hinge-moment characteristics of a full-span flap-type rudder on a 5-percent-thick, swept vertical fin of low aspect ratio. Test results how that the aerodynamic damping moment on the plain rudder becomes unstable near a Mach number of 0.975 and remains unstable to the maximum speed of the tests.

Memorandum presenting an investigation of hemispherical nose shapes of titanium, stainless steel coated with aluminum oxide, and uncoated stainless steel with lithium hydride and magnesium as internal coolants. Results regarding titanium models, stainless-steel models (uncoated), stainless-steel models coated with aluminum oxide, solution effects on the decomposition temperature of lithium hydride, effect of lithium hydride and magnesium on temperature measurements, and efficiency of models cooled with lithium hydride are provided.

"A study has been made of a flare-cylinder configuration to investigate its feasibility as a reentry body of an intermediate range ballistic missile. Factors considered were heating, weight, stability, and impact velocity. A series of trajectories covering the possible range of weight-drag ratios were computed for simple truncated nose shapes of varying pointedness, and hence varying weight-drag ratios" (p. 1).

Report presenting the results of two runs made with liquid diborane and hydrogen peroxide in a small-scale rocket engine. The first run was very erratic and modifications were made to the testing apparatus and procedures for the second run. In the second run, the combustion started immediately and continued smoothly for 12 seconds of operation.

Report presenting an investigation to determine the high-speed performance and static longitudinal stability and control characteristics of a model of the Lockheed YP-80A airplane. High-speed aerodynamic characteristics are presented for speeds up to Mach number 0.96. Results regarding the scale effects, longitudinal stability, and longitudinal-control effectiveness are provided.

Aerodynamic and icing investigations of internal water-inertia separation inlets designed to prevent automatically entrance of large quantities of water into a turbojet engine in icing conditions was conducted on a one-half scale model. A simplified analytical approach to the design of internal water-inertia separation inlets is included. Results show that in order to be effective in preventing screen and guide-vane icing for an inlet of this type, a ram-pressure recovery of 75 percent was attained at design inlet-velocity ratio in an icing condition. For nonicing operation, ram-pressure recovery is comparable to direct-ram inlet.

Report presenting an investigation of a series of 16-inch-diameter ramjet engine in free flight in order to determine the performance of ramjet units in flight at supersonic speeds and to study methods for improving the performance. Results regarding the telemeter data recorded by ground stations, static pressures, variation of altitude with time after release, variation of flight velocities, and fuel-air ratio are provided. Partial failure of the measuring equipment prevented a complete evaluation of engine performance.

From Wing Thickness: "A brief review of the effect of wing thickness and thickness distribution on the high-speed performance and stability characteristics of a representative configuration is presented."

From Summary: "In order to provide a basis for judging the relative importance of wing failure by fatigue and by single intense gusts, an analysis of wing life for normal cruising flight was made based on data on the frequency of atmospheric gusts. The independent variables considered in the analysis included stress-concentration factor, stress-load relation, wing loading, design and cruising speeds, design gust velocity, and airplane size. Several methods for estimating fatigue life from gust frequencies are discussed."

Report presenting measurements of the intensity of buffeting experienced by the Douglas D-558-II research airplane at a range of Mach numbers. Buffeting was encountered at both subsonic and supersonic Mach numbers and the intensity of the buffeting varied with Mach number and airplane normal-force coefficient.

Report presenting an investigation to determine the blade torsional deflection of three supersonic-type propellers at various operating conditions. Blade-torsional deflection was found to produce appreciable results that can be predicted by theory with good accuracy. Results regarding the efficiency, thrust coefficient, and power coefficient are provided.

Report presenting the results of testing of bodies and wing-body combinations by the free-fall method in order to provide information about drag characteristics of airplanes and their component parts at transonic speeds. Two models with a fineness-ratio-12 body of revolution with 45 degree sweptback wings located at different positions were dropped and equipped with improved drag measuring instrumentation and pressure measuring orifices on the portion of the body expected to be influenced by the presence of the wing. Results regarding pressure data and drag data are provided.

Memorandum presenting a rocket-propelled model of a representative 35 degree sweptback wing airplane design at high subsonic Mach numbers to investigate the possibility of the existence of coupled longitudinal and lateral motions. The data indicate the existence of sustained longitudinal motions of appreciable amplitude forced by lateral oscillations. The longitudinal motions had twice the frequency of the lateral oscillations and are shown to be the result of aerodynamic moments due to sideslip and inertial cross coupling.

Methods of conversion of UF4 to U3O8 by fusion with ammonium oxalate dihydrate and other salts are described.