Kapton HN properties and the properties of the slip additive calcium phosphate dibasic (CaHPO{sub 4}) were investigated. Impurity analyses were performed on the compound by inductively coupled plasma (ICP) and ion chromatography (IC). Other analyses on the slip additive included: processing solution -- dissolution analysis, high-explosive compatibility studies, scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS), and particle size distribution. Testing and analyses were also performed on Kapton HN film and other polyimide films that could serve as possible replacements for Kapton HN. The polyimide films that were tested are: Upilex-R, Upilex-S, Upilex-SGA, and Apical. The analyses performed were: infrared (IR), x-ray photoelectron spectroscopy (XPS), SEM/EDS, high-potential breakdown testing, (PVD) physical vapor deposition adhesion tests, and peel tests. Upilex-S flyer cables were also fabricated and successfully test fired. In addition to these raw material tests, production cables were chemically treated and destructively (high potential) tested. A long-term aging environment for production cables was also selected, and aging tests were begun. 9 figs., 7 tabs.

This report contains highlights on activities conducted at Y-12 Development Division for the period ending January 1, 1990. Ozone treatment removes trace amounts of organics and chloride ions from recycled acid. Heating significantly reduces this reaction time for removing these impurities. A new heater design was reinstalled on the recycle system, reducing the ozonation time from 70 to 100 hours to 30 to 40 hours. This reduction in ozonation time resulted in increased acid recovery and reduced acid wastes that had to be discarded. Shallow land burial in Bear Creek Burial Ground (BCBG) of depleted uranium and uranium alloy chips has been discontinued, and these materials will now be processed at the Uranium Chip Oxidation Facility (UCOF). A series of chip burns was made to reduce the overall flameout frequency to 1% to comply with UCOF safety documentation. This testing phase reduced the flameout frequency to 2 per 2,959 burns (<0.1%), which is a 92% decrease of flameouts over last quarter. This work successfully demonstrated that all of the uranium and uranium alloy chips (except sawfines) can be safely oxidized at UCOF with a flameout frequency of 1% or less. 2 refs., 3 figs., 1 tab.

The objective of this training is to: describe the responsibilities, resources, and goals of the Emergency Operations Center and be able to evaluate and interpret this information to best direct and allocate emergency, plant, and other resources to protect life and the Paducah Gaseous Diffusion Plant.

This report is a complete user's manual for KDYNA, the Earth Sciences version of DYNA2D. Because most features of DYNA2D have been retained in KDYNA much of this manual is identical to the DYNA2D user's manual.

This report highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. 7 figs., 34 tabs.

Data presented in this PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 46 tabs.

Fully dense, nanocrystalline ceramic articles were prepared by the new nanofabrication process. The process consists of two steps: synthesis of ceramic nanoparticles and fabrication of dense, nanocrystalline ceramic parts. The synthesis step produced 10-nanometer-diameter crystallites, and is capable of being scaled up to kilogram/hour production rates. The fabrication step produced dense parts at significantly reduced sintering temperatures and times -- representing a factor of 10--100 reduction in process energy requirements. The process was demonstrated by producing ultrafine-grained yttria-stabilized ZrO[sub 2], an important material with a variety of energy-related applications (solid electrolytes, oxygen sensors, electrode materials, thermal barrier coatings, etc.). Results from this period clearly illustrate the capabilities of this energy-efficient and directly commercializable process for producing dense, nanocrystalline, multicomponent oxide ceramics.

The objectives of this contract are to discover and evaluate the catalytic properties of novel homogeneous, heterogeneous, or combination catalytic systems for the production of alcohol fuel extenders from syngas, to evaluate analytically and on the bench scale novel reactor concepts for use in converting syngas to liquid fuel products, and to develop on the bench scale the best combination of chemistry, reactor, and total process configuration to achieve the minimum product cost for conversion of syngas to liquid fuel products. Methanol production and heterogeneous catalysis utilizing transition elements supported on metal oxides with spinel structure are discussed. 12 figs., 16 tabs.

The United States Transuranium and Uranium Registries are unique human tissue research programs studying the distribution, dose, and possible biological effects of the actinide elements in man, with the primary goal of assuring the adequacy of radiation protection standards for these radionuclides. The Registries research is based on radiochemical analysis of tissues collected at autopsy from voluntary donors who have documented occupational exposure to the actinides. To date, tissues, or in some cases radioanalytical results only, have been obtained from approximately 300 individuals; another 464 living individuals have volunteered to participate in the Registries research programs and have signed premortem informed consent and autopsy permissions. The Registries originated at the National Plutonium Registry which was started in 1968 as a then Atomic Energy Commission project under the aegis of a prime contractor at the Hanford site. In 1970, the name was changed to the United States Transuranium Registry to reflect a broader involvement with the higher actinides. In 1978, an administratively separate parallel registry, the United States Uranium Registry, was formed to carry out similar studies among uranium fuel cycle workers.

Three main issues giving purpose to our visit to CERN, ESRF and DESY were to: assess the current thinking at CERN on whether Eta, the gas desorption coefficient, would continue to decrease with continued with continued beam cleaning, determine if the time between NEG reconditioning could be expanded, and acquire a knowledge of the basic fabrication processes and techniques for producing beam vacuum chambers of copper.

As a consequence of the Chernobyl accident, data have been obtained throughout the Northern Hemisphere on the concentrations of radionuclides in air, vegetation, soil, water, and foodstuffs that could be important means of human exposure. At the IAEA's invitation, the traveler reviewed recently published data and handbook summaries. The traveler evaluated the need for revising the default values recommended in Chapter 5, Terrestrial and Aquatic Food Chain Transport,'' of IAEA Safety Series No. 57. All attempts at revision were made to keep the mathematical complexity of the models to a minimum without substantial underestimation of dose to critical population subgroups. The traveler also served as chairman of the Multiple Pathways Working Group of the Coordinated Research Program on VAMP. This group has been established to test predictions of models assessing multiple exposure pathways potentially leading to human exposure to {sup 137}Cs. Testing is carried out for major components of assessment models that predict deposition, environmental transport, food chain bioaccumulation, and subsequent uptake and retention in the human body and dose due to exposure to external gamma radiation.

This report describes problems, delays, and development of computer codes for use in the Hanford Environmental Dose Reconstruction Project.

This Standard is intended to provide guidance in the use of the seismic hazard curves developed by the Lawrence Livermore National Laboratory (LLNL) and the Electric Power Research Institute (EPRI). Experience to-date has shown that application of these methodologies can yield significantly different results. In response to this issue, a Seismic Working Group (SWG) has been formed at the Department of Energy (DOE) Headquarters to coordinate the application of these methodologies within DOE in a consistent manner. The position developed by the SWG and contained in this Standard is intended for immediate use in developing seismic hazard estimates at DOE sites for the evaluation of new and existing, nuclear and non-nuclear DOE facilities. This Standard is needed not only to address the LLNL/EPRI issue but also to assure that state-of-the-art seismic hazard methods are incorporated into DOE standards as soon as possible. The DOE is currently involved in a joint program with the Nuclear Regulatory Commission and EPRI to evaluate these existing probabilistic seismic hazard methodologies and to develop recommendations for an improved methodology for the 1990`s. The final product of this effort is expected to result in more stable hazard estimates and will supersede this Standard in approximately two …

This document evaluates the need for tritium sampling of the emissions from the 200 East Area Double Shell Tanks based on the requirements of {open_quotes}National Emission Standards for Hazardous Air Pollutants{close_quotes} (NESHAP). The NESHAP requirements are specified in 40 Code of Federal Regulation (CFR), Part 61, Subpart H; {open_quotes}National Emission Standards for Emissions of Radionuclides Other than Radon from Department of Energy Facilities{close_quotes}.

Several membranes have been investigated for use in a membrane reactor. Porous VYCOR has been tested for permeability changes with temperature. Three-sectional VYCOR membranes, with a porous central section, have been fabricated and tested in the experimental setup. Catalysts for methane coupling have been reviewed in the literature and five catalysts have been selected. Modeling studies of the methane oxidative coupling reaction in different reactor configurations shows higher C{sub 2} selectivity and yield with membrane reactors as compared to conventional packed bed reactors.

This report is a progress report to the US DOE from the Board on Radioactive Waste Management (BRWM), which summarizes the activities of the board during the period December 1, 1993 to May 2, 1994. The report summarizes the meetings of the board as a whole, of various of its subcommittees, and of activities it has undertaken to further its original mission. This board is associated with the National Research Council to give advice to US DOE.

This document provides a discussion of the technical progress on DOE/PETC project number DE-AC22-92PC91338, {open_quotes}High Efficiency SO{sub 2} Removal Testing{close_quotes}, for the time period 1 July through 30 September, 1993. The project involves testing at six full-scale utility flue gas desulfurization (FGD) systems, to evaluate low capital cost upgrades that may allow these systems to achieve up to 98% SO{sub 2} removal efficiency. The upgrades to be evaluated primarily involve the addition of organic acid buffers to the FGD systems. The {open_quotes}base{close_quotes} project involved testing at the Tampa Electric Company Big Bend station. As of September 1993, all five potential options to the base program had been exercised by DOE, involving testing at the Hoosier Energy Merom Station (Option I), the Southwestern Electric Power Company Pirkey Station (Option II), the PSI Energy Gibson Station (Option III), the Duquesne Light Elrama Station (Option IV), and the New York State Electric and Gas Company Kintigh Station (Option V). As of September 1993, testing has been completed for the base project and for Options 1 and 2, has begun but not been completed for Options III and IV, and has not yet begun for Option V. This document is divided into five sections. …

This report summarizes and documents the results of the radiological surveys conducted over the surface of the 100-DR-1 Operable Unit, Hanford Site, Richland, Washington. In addition, this report explains the survey methodology using the Ultrasonic Ranging and Data System (USRADS). The 100-DR-1 radiological survey field task consisted of two activities: characterization of the operable unit-specific background conditions and the radiological survey of the operable unit surface area. The survey methodology was based on utilization of USRADS for automated recording of the gross gamma radiation levels at or near 6 in. and at 3 ft from the surface soil. The purpose of the survey is to identify the location of unidentified subsurface radioactive material areas and any surface contamination associated with these areas. The radiological surveys were conducted using both a digital count rate meter with a NaI detector reporting in counts per minute (CPM) and a dose rate meter reporting micro-Roentgen per hour (uR) connected to a CHEMRAD Tennessee Corp. Series 2000 USRADS. The count rate meter was set for gross counting, i.e., Window ``out``. The window setting allows detection of low, intermediate, and high energy photons. The USRADS equipment is used to record the detector readings verses the location …

This document is the Health and Safety Plan (HASP) for the demonstration of IITRI`s EM Treatment Technology. In this process, soil is heated in situ by means of electrical energy for the removal of hazardous organic contaminants. This process will be demonstrated on a small plot of contaminated soil located in the Pit Area of Classified Burial Ground K-1070-D, K-25 Site, Oak Ridge, TN. The purpose of the demonstration is to remove organic contaminants present in the soil by heating to a temperature range of 85{degrees} to 95{degrees}C. The soil will be heated in situ by applying 60-Hz AC power to an array of electrodes placed in boreholes drilled through the soil. In this section a brief description of the process is given along with a description of the site and a listing of the contaminants found in the area.

This DOE research project was established to document the integrated team approach for solving reservoir engineering problems. A field study integrating the disciplines of geology, geophysics, and petroleum engineering will be the mechanism for documenting the integrated approach. This is an area of keen interest to the oil and gas industry. The goal will be to provide tools and approaches that can be used to detect reservoir compartments, reach a better reserve estimate, and improve profits early in the life of a field.

This report describes progress on three fronts of the project. First in studies to elucidate optimal growing conditions for the consortia of coal degraders employed indicates that best growth occurs with 0. 2% w/v Shefton T. Secondly in comparing the biodegradative properties of the coal degraders, isolates identified as Mic-1 and Mic-4 were the best performers. And lastly bioreactors studies in batch mode are related.

This annual technical progress report, based on the same four divisions used in our original proposal, provides only a brief synopsis of the research carried out dudng the past three years. We have also included a brief description of algorithms and computer programs that have been transferred to the ARM management. Such transfers of knowledge and technique are vital for the success of the ARM program. Various members of our research group participated in two major field programs: the First ISSCP Regional Experiment (FIRE) Cirrus II Experiment held in November 1991, in Kansas, and the Atlantic Stratocumulus Transition Experiment (ASTEX) held in the Azores in June 1992. Although our participation in these campaigns was funded primarily through other agencies, the data collected in these programs were essential for certain components of our research. The graphical user interface programs that were transferred to ARM were a direct outgrowth of these field activities as well. In addition, we collected a variety of data at Penn State using our 94 GHz radar, microwave radiometer, wind profilers, and other instruments. Again these data were acquired to meet the needs of our proposed research.

The Materials Technology Section (MTS) of the Savannah River Technology Center (SRTC) was asked to demonstrate the practicality of recycling previously contaminated stainless steel components such as reactor heat exchanger heads, process water piping and slug buckets into 208 liters (55 gallon) drums and 2.8 cubic meter (100 ft{sup 3}) storage boxes. Radioactively contaminated stainless steel scrap will be sent to several industrial partners where it will be melted, decontaminated/cast into ingots, and rolled into plate and sheet and fabricated into the drums and boxes. As part of this recycle initiative, MTS was requested to demonstrate that radioactively contaminated Type 304L stainless steel could be remelted and cast to meet the applicable ASTM specification for fabrication of drums and boxes. In addition, MTS was requested to develop the technical basis of melt decontamination and establish practicality of using this approach for value added products. The findings presented in this investigation lead to the following conclusions: recycle of 18 wt% Cr-8 wt% Ni alloy can be achieved by melting Type 304 stainless steel in a air vacuum induction furnace; limited melt decontamination of the contaminated stainless steel was achieved, surface contamination was removed by standard decontamination techniques; carbon uptake in the …

The purpose of this document is to introduce and describe the Stored Waste Autonomous Mobile Inspector (SWAMI) robot project and to identify issues that will need to be addressed prior to its field demonstration at Fernald in mid-1995. SWAMI is a mobile robotic vehicle that will perform mandated weekly inspections of waste containers. Fernald has a large inventory of these containers and a need to protect workers from radiation hazards while enhancing the efficiency and effectiveness of the inspections. Fernald`s role in this project is to supply the demonstration site and make all necessary preparations. This includes identification of the test areas and plans, and identification and compliance to Federal, State, DOE, and Site regulations on system safety and quality. In addition, Fernald will link SWAMI output images to off-line mass data storage, and also to an on-line ORACLE database. The authors shall initiate a dialog with State and Federal regulators towards the near term goal of acceptance of the SWAMI test plan and a longer term goal of acceptance of SWAMI as a supplement and improvement to present mandated RCRA inspections.