This report discusses: Cryogenic technology; polymer shell fabrication; glass shell fabrication and characterization; coating technology; development of characterization techniques; laser technology; and plasma research and instrumentation.

The objective of this training is to: describe the responsibilities, resources, and goals of the Emergency Operations Center and be able to evaluate and interpret this information to best direct and allocate emergency, plant, and other resources to protect life and the Paducah Gaseous Diffusion Plant.

Purpose of the Phase I effort was to demonstrate feasibility of the fuel cell/battery system for powering a small bus (under 30 ft or 9 m) on an urban bus route. A brassboard powerplant was specified, designed, fabricated, and tested to demonstrate feasibility in the laboratory. The proof-of-concept bus, with a powerplant scaled up from the brassboard, will be demonstrated under Phase II.

Annual report providing tabular statistical information about motor vehicle accidents in rural areas of Texas during calendar year 1989, with data broken out by various criteria including number of persons, locations, types of accidents, time of day, and other factors.

Annual report providing tabular statistical information about motor vehicle accidents in Texas during calendar year 1989, with data broken out by various criteria including number of persons, locations, types of accidents, time of day, and other factors.

Annual report providing tabular statistical information about motor vehicle accidents that involved motorcycles in Texas during calendar year 1989, with data broken out by various criteria including number of persons, locations, types of accidents, time of day, and other factors.

Annual report providing tabular statistical information about motor vehicle accidents that directly or indirectly involved school buses in Texas during calendar year 1989, with data broken out by various criteria including number of persons, locations, types of accidents, time of day, and other factors.

The objectives of this study are to determine the intrinsic kinetics and the product layer diffusion rate by minimizing the resistances to gas-phase pore diffusion, and eliminating complications due to pore filling. In the report, a grain model was used to introduce the various potentially rate-limiting processes. It was compared with results obtained with a distributed pore model by Bhatia Perlmutter (1981). Comparing the predicted behavior of the surface areas with conversion, it was even possible to compare experimental results with other models. The conclusion of this study was that, even thought the kinetic parameters obtained with different samples differed much more if product layer diffusion assumed rate-limiting rather than the surface reaction, the shape of the predicted curve approached the experimental findings so much better, that product layer diffusion is indeed most likely to be rate-limiting. (VC)

The objectives of this study are to determine the intrinsic kinetics and the product layer diffusion rate by minimizing the resistances to gas-phase pore diffusion, and eliminating complications due to pore filling. In the report, a grain model was used to introduce the various potentially rate-limiting processes. It was compared with results obtained with a distributed pore model by Bhatia & Perlmutter (1981). Comparing the predicted behavior of the surface areas with conversion, it was even possible to compare experimental results with other models. The conclusion of this study was that, even thought the kinetic parameters obtained with different samples differed much more if product layer diffusion assumed rate-limiting rather than the surface reaction, the shape of the predicted curve approached the experimental findings so much better, that product layer diffusion is indeed most likely to be rate-limiting. (VC)

The objectives of this contract are to discover and evaluate the catalytic properties of novel homogeneous, heterogeneous, or combination catalytic systems for the production of alcohol fuel extenders from syngas, to evaluate analytically and on the bench scale novel reactor concepts for use in converting syngas to liquid fuel products, and to develop on the bench scale the best combination of chemistry, reactor, and total process configuration to achieve the minimum product cost for conversion of syngas to liquid fuel products. Methanol production and heterogeneous catalysis utilizing transition elements supported on metal oxides with spinel structure are discussed. 12 figs., 16 tabs.

It is worth considering an experiment on a sum resonance. I will give an analytic treatment of a third-order sum resonance. The treatment parallels that in LS-132 for the Walkinshaw difference resonance. Although the algebra is essentially the same as for the difference resonance, the sum resonance appears to have a richer structure.

Compilation of monthly reports from departments in the city of San Antonio, Texas providing statistics, project updates, and other information about services and activities. This is the report for the Historic Review Board for June 1990.

Summary of directives as a result of a meeting of the Texas lesbian/gay community. Includes highlighting.

Three main issues giving purpose to our visit to CERN, ESRF and DESY were to: assess the current thinking at CERN on whether Eta, the gas desorption coefficient, would continue to decrease with continued with continued beam cleaning, determine if the time between NEG reconditioning could be expanded, and acquire a knowledge of the basic fabrication processes and techniques for producing beam vacuum chambers of copper.

The general objective of this project is the investigation of phase equilibria for complex fluids using a novel methodology, Monte Carlo simulation in the Gibbs ensemble. The methodology enables the direct determination of the properties of two coexisting fluid phases (e.g. a liquid at equilibrium with its vapor) from a single computer experiment, and is applicable to multicomponent systems with arbitrary equilibrium constraints imposed. The specific goals of this work are to adapt the Gibbs technique to (a) highly asymmetric mixtures with large differences in size and potential energies of interaction (b) chain molecules and (c) ionic systems. Significant progress has been made in all three areas. In this paper, we will briefly describe the progress made in each area, using the same numbering scheme for the tasks as in the original proposal.

Early in 1985, Sam Berk of the Office of Fusion Energy, US Department of Energy, suggested that the development and validation of 3-D eddy current codes would benefit from the compilation of benchmark problems that could be used to validate the codes and from a series of workshops for the comparison of solution methods and codes. (Two years later, at the first International Symposium on Fusion Nuclear Technology in Tokyo, Sam Berk proposed the acronym TEAM for the workshops.) At a three-day planning meeting at Argonne National Laboratory (ANL) in November 1985, eleven participants from five countries defined the goals, format, schedule and problems for the workshops. The ultimate goal is to show the effectiveness of numerical techniques and associated computer codes in solving electromagnetic field problems, and to gain confidence in their predictions. The workshops should also provide cooperation between workers, leading to an interchange of ideas. This note reviews the three cycles of workshops and the problems.

At our Nova laser facility, the temporal history of incident and reflected laser energy is recorded on LLNL optical streak cameras. Currently, six cameras are used to record the incident 1.06-{mu}m, incident 0.35{mu}m power of each of the ten Nova beams. Each camera records seven multiplexed signals: typically one signal from each of five beam lines, a fiducial pulse, and time mark generator signal. The optical signals are transported to the camera through optical fibers. The output end of each fiber is placed in the slit plane of the camera. The light exiting the fiber is focused to the streak camera photocathode by the streak camera relay lens. One camera can record a signal from each of the ten Nova beams plus a fiducial and time mark generator signal if the number of multiplexed channels can be increased from seven to twelve. This would allow one camera to record the same data that currently requires two cameras. At a savings of $150 per camera/CCD system, this represents a savings of $450K. Additionally, camera/CCD maintenance and operation complexity would be cut in half and three streak cameras would be freed for use in other experiments. Recent laboratory measurements suggest that the …

Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing.

Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing.

This document reports the progress made during the first six months of the current three-year DOE grant on Artificially Structured Magnetic Materials.'' However, because some of the results of our previous three-year DOE grant on Artificially Structured Superconductors'' continue to emerge, both topics are addressed in this Progress Report. This report describes progress with DOE funding during the current calendar year; description of the research to be conducted during the remaining six months of the current grant year; a description of the status of the graduate students working on this research; lists of the invited talks, seminars and colloquia, of other recognition of our research, and of the publications crediting DOE sponsorship; and a summary of current and pending federal support. Since the research proposed to be conducted during the next 2 1/2 years is described in detail in our DOE proposal, it is only briefly reviewed here.

This report presents the status at the end of 1989 and the outlook for commercial nuclear capacity and generation for all countries in the world with free market economies (FME). The report provides documentation of the US nuclear capacity and generation projections through 2030. The long-term projections of US nuclear capacity and generation are provided to the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) for use in estimating nuclear waste fund revenues and to aid in planning the disposal of nuclear waste. These projections also support the Energy Information Administration's annual report, Domestic Uranium Mining and Milling Industry: Viability Assessment, and are provided to the Organization for Economic Cooperation and Development. The foreign nuclear capacity projections are used by the DOE uranium enrichment program in assessing potential markets for future enrichment contracts. The two major sections of this report discuss US and foreign commercial nuclear power. The US section (Chapters 2 and 3) deals with (1) the status of nuclear power as of the end of 1989; (2) projections of nuclear capacity and generation at 5-year intervals from 1990 through 2030; and (3) a discussion of institutional and technical issues that affect nuclear power. The …

The purpose of this study was to identify the general principles governing the choice of hybrid separation systems over straight membrane or straight nonmembrane systems and to do so by examining practical applications (process design and economics). Our focus was to examine the energy consumption characteristics and overall cost factors of the membrane and nonmembrane technologies that cause hybrid systems to be preferred over nonhybrid systems. We evaluated four cases studies, chosen on the basis of likelihood of commercial viability of a hybrid system and magnitude of energy savings: (1) propane/propylene separation; (2) removal of nitrogen from natural gas; (3) concentration of Kraft black liquor; and (4)solvent deasphalting. For propane/propylene splitting, the membrane proved to be superior to distillation in both thermodynamic efficiency and processing cost (PC) when the product was 95% pure propylene. However, to produce higher purity products, the membrane alone could not perform the separation, and a membrane/distillation hybrid was required. In these cases, there is an optimum amount of separation to be accomplished by the membrane (expressed as the fraction of the total availability change of the membrane/distillation hybrid that takes place in the membrane and defined as {phi}{sub m}, the thermodynamic extent of separation). Qualitative …

Tritium was released to the atmosphere from the Savannah River Plant during an incident on September 2 and 3, 1984 between 10 PM and 3 AM. During this five hour period, 43,800 Ci of tritium, principally in the form of the oxide (HTO), was released. An additional 14,000, Ci was released during subsequent cleanup operations between September 3 and 7. The total amount released from the incident was 57,800 Ci. The HTO cloud initially moved northward and passed near the towns of New Ellenton and Aiken, SC. Two hours after the release began, the wind shifted and carried the cloud toward Columbia, SC. The cloud moved northeast during the daytime on September 3 over the east-central portion of North Carolina. Environmental sampling teams were dispatched by SRL, SRP, and SCDHEC (South Carolina Department of Health and Environmental Control). SRL collected air and vegetation samples and SRP collected vegetation, water, milk and bioassay samples. SCDHEC collected vegetation, milk, and water samples. The highest activity of HTO measured in vegetation was 501 pCi/mL onsite, 2522 pCi/mL at the plant boundary, and 9859 pCi/mL offsite. These concentrations were approximately 100 times larger than normal values. 13 refs., 7 figs., 10 tabs.

The frequency of stress corrosion cracking in the near weld regions of the SRS reactor tank walls is apparently lower than the cracking frequency near the pipe-to-pipe welds in the primary cooling water system. The difference in cracking tendency can be attributed to differences in the welding processes, fabrication schedules, near weld residual stresses, exposure conditions and other system variables. This memorandum discusses the technical issues that may account the differences in cracking tendencies based on a review of the fabrication and operating histories of the reactor systems and the accepted understanding of factors that control stress corrosion cracking in austenitic stainless steels.