Summary of directives as a result of a meeting of the Texas lesbian/gay community. Includes highlighting.

The purpose of this study was to identify the general principles governing the choice of hybrid separation systems over straight membrane or straight nonmembrane systems and to do so by examining practical applications (process design and economics). Our focus was to examine the energy consumption characteristics and overall cost factors of the membrane and nonmembrane technologies that cause hybrid systems to be preferred over nonhybrid systems. We evaluated four cases studies, chosen on the basis of likelihood of commercial viability of a hybrid system and magnitude of energy savings: (1) propane/propylene separation; (2) removal of nitrogen from natural gas; (3) concentration of Kraft black liquor; and (4)solvent deasphalting. For propane/propylene splitting, the membrane proved to be superior to distillation in both thermodynamic efficiency and processing cost (PC) when the product was 95% pure propylene. However, to produce higher purity products, the membrane alone could not perform the separation, and a membrane/distillation hybrid was required. In these cases, there is an optimum amount of separation to be accomplished by the membrane (expressed as the fraction of the total availability change of the membrane/distillation hybrid that takes place in the membrane and defined as {phi}{sub m}, the thermodynamic extent of separation). Qualitative …

The Pennsylvania State University is conducting a superclean coal-water slurry (SCCWS) program with the objective of demonstrating the capability of effectively firing SCCWS in industrial boilers designed for oil. Penn State has entered into a cooperative agreement with DOE to determine if SCCWS (a fuel containing coal with less than 3.0% ash and 0.9% sulfur) can effectively be burned in oil-designed industrial boilers without adverse impact on boiler rating, maintainability, reliability and availability. The project will provide information on the design of new systems specifically configured to fire these clean coal-based fuels. The project consists of three phases: (1) design, permitting, and test planning, (2) construction and start up, and (3) demonstration and evaluation. The boiler testing will determine if the SCCWS combustion characteristics, heat release rate, fouling and slagging behavior, corrosion and erosion limits, and fuel transport, storage, and handling characteristics can be accommodated in an oil-designed boiler system. In addition, the proof-of-concept demonstration will generate data to determine how the properties of SCCWS and its parent coal affect boiler performance. Economic factors associated with retrofitting and operating boilers will be identified to assess the viability of future oil-to-coal retrofits. Progress is reported. 7 refs., 7 figs., 1 tab.

Evidence from subsurface mapping and seismic reflection surveys at Savannah River Site (SRS) suggests the presence of a fault which displaces Cretaceous through Tertiary (90--35 million years ago) sediments. This feature has been described and named the Pen Branch fault (PBF) in a recent Savannah River Laboratory (SRL) paper (DP-MS-88-219). Because the fault is located near operating nuclear facilities, public perception and federal regulations require a thorough investigation of the fault to determine whether any seismic hazard exists. A phased program with various elements has been established to investigate the PBF to address the Nuclear Regulatory Commission regulatory guidelines represented in 10 CFR 100 Appendix A. The objective of the PBF program is to fully characterize the nature of the PBF (ESS-SRL-89-395). This report briefly presents current understanding of the Pen Branch fault based on shallow drilling activities completed the fall of 1989 (PBF well series) and subsequent core analyses (SRL-ESS-90-145). The results are preliminary and ongoing: however, investigations indicate that the fault is not capable. In conjunction with the shallow drilling, other activities are planned or in progress. 7 refs., 8 figs., 1 tab.

This report summarizes beryllium properties included in producer, Department of Energy, and government specifications. The specifications are divided into two major categories: current and historical. Within each category the data are arranged primarily according to increasing purity and secondarily by increasing tensile properties. Qualitative comments on formability and weldability are included. Also, short summaries of powder production and consolidation techniques are provided.

This report discusses: Cryogenic technology; polymer shell fabrication; glass shell fabrication and characterization; coating technology; development of characterization techniques; laser technology; and plasma research and instrumentation.

This work encompasses a broad attack on high speed parallel processing. Hardware, software, applications development, and performance evaluation and visualization as well as research topics are proposed. Our goal is to develop practical parallel processing for the 1990's.

Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing.

The frequency of stress corrosion cracking in the near weld regions of the SRS reactor tank walls is apparently lower than the cracking frequency near the pipe-to-pipe welds in the primary cooling water system. The difference in cracking tendency can be attributed to differences in the welding processes, fabrication schedules, near weld residual stresses, exposure conditions and other system variables. This memorandum discusses the technical issues that may account the differences in cracking tendencies based on a review of the fabrication and operating histories of the reactor systems and the accepted understanding of factors that control stress corrosion cracking in austenitic stainless steels.

This report presents the status at the end of 1989 and the outlook for commercial nuclear capacity and generation for all countries in the world with free market economies (FME). The report provides documentation of the US nuclear capacity and generation projections through 2030. The long-term projections of US nuclear capacity and generation are provided to the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) for use in estimating nuclear waste fund revenues and to aid in planning the disposal of nuclear waste. These projections also support the Energy Information Administration's annual report, Domestic Uranium Mining and Milling Industry: Viability Assessment, and are provided to the Organization for Economic Cooperation and Development. The foreign nuclear capacity projections are used by the DOE uranium enrichment program in assessing potential markets for future enrichment contracts. The two major sections of this report discuss US and foreign commercial nuclear power. The US section (Chapters 2 and 3) deals with (1) the status of nuclear power as of the end of 1989; (2) projections of nuclear capacity and generation at 5-year intervals from 1990 through 2030; and (3) a discussion of institutional and technical issues that affect nuclear power. The …

Kapton HN properties and the properties of the slip additive calcium phosphate dibasic (CaHPO{sub 4}) were investigated. Impurity analyses were performed on the compound by inductively coupled plasma (ICP) and ion chromatography (IC). Other analyses on the slip additive included: processing solution -- dissolution analysis, high-explosive compatibility studies, scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS), and particle size distribution. Testing and analyses were also performed on Kapton HN film and other polyimide films that could serve as possible replacements for Kapton HN. The polyimide films that were tested are: Upilex-R, Upilex-S, Upilex-SGA, and Apical. The analyses performed were: infrared (IR), x-ray photoelectron spectroscopy (XPS), SEM/EDS, high-potential breakdown testing, (PVD) physical vapor deposition adhesion tests, and peel tests. Upilex-S flyer cables were also fabricated and successfully test fired. In addition to these raw material tests, production cables were chemically treated and destructively (high potential) tested. A long-term aging environment for production cables was also selected, and aging tests were begun. 9 figs., 7 tabs.

This report contains highlights on activities conducted at Y-12 Development Division for the period ending January 1, 1990. Ozone treatment removes trace amounts of organics and chloride ions from recycled acid. Heating significantly reduces this reaction time for removing these impurities. A new heater design was reinstalled on the recycle system, reducing the ozonation time from 70 to 100 hours to 30 to 40 hours. This reduction in ozonation time resulted in increased acid recovery and reduced acid wastes that had to be discarded. Shallow land burial in Bear Creek Burial Ground (BCBG) of depleted uranium and uranium alloy chips has been discontinued, and these materials will now be processed at the Uranium Chip Oxidation Facility (UCOF). A series of chip burns was made to reduce the overall flameout frequency to 1% to comply with UCOF safety documentation. This testing phase reduced the flameout frequency to 2 per 2,959 burns (<0.1%), which is a 92% decrease of flameouts over last quarter. This work successfully demonstrated that all of the uranium and uranium alloy chips (except sawfines) can be safely oxidized at UCOF with a flameout frequency of 1% or less. 2 refs., 3 figs., 1 tab.

The objective of this training is to: describe the responsibilities, resources, and goals of the Emergency Operations Center and be able to evaluate and interpret this information to best direct and allocate emergency, plant, and other resources to protect life and the Paducah Gaseous Diffusion Plant.

This report is a complete user's manual for KDYNA, the Earth Sciences version of DYNA2D. Because most features of DYNA2D have been retained in KDYNA much of this manual is identical to the DYNA2D user's manual.

This report highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. 7 figs., 34 tabs.

Data presented in this PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 46 tabs.

The objectives of this contract are to discover and evaluate the catalytic properties of novel homogeneous, heterogeneous, or combination catalytic systems for the production of alcohol fuel extenders from syngas, to evaluate analytically and on the bench scale novel reactor concepts for use in converting syngas to liquid fuel products, and to develop on the bench scale the best combination of chemistry, reactor, and total process configuration to achieve the minimum product cost for conversion of syngas to liquid fuel products. Methanol production and heterogeneous catalysis utilizing transition elements supported on metal oxides with spinel structure are discussed. 12 figs., 16 tabs.

Three main issues giving purpose to our visit to CERN, ESRF and DESY were to: assess the current thinking at CERN on whether Eta, the gas desorption coefficient, would continue to decrease with continued with continued beam cleaning, determine if the time between NEG reconditioning could be expanded, and acquire a knowledge of the basic fabrication processes and techniques for producing beam vacuum chambers of copper.

As a consequence of the Chernobyl accident, data have been obtained throughout the Northern Hemisphere on the concentrations of radionuclides in air, vegetation, soil, water, and foodstuffs that could be important means of human exposure. At the IAEA's invitation, the traveler reviewed recently published data and handbook summaries. The traveler evaluated the need for revising the default values recommended in Chapter 5, Terrestrial and Aquatic Food Chain Transport,'' of IAEA Safety Series No. 57. All attempts at revision were made to keep the mathematical complexity of the models to a minimum without substantial underestimation of dose to critical population subgroups. The traveler also served as chairman of the Multiple Pathways Working Group of the Coordinated Research Program on VAMP. This group has been established to test predictions of models assessing multiple exposure pathways potentially leading to human exposure to {sup 137}Cs. Testing is carried out for major components of assessment models that predict deposition, environmental transport, food chain bioaccumulation, and subsequent uptake and retention in the human body and dose due to exposure to external gamma radiation.

Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing.

The frequency of stress corrosion cracking in the near weld regions of the SRS reactor tank walls is apparently lower than the cracking frequency near the pipe-to-pipe welds in the primary cooling water system. The difference in cracking tendency can be attributed to differences in the welding processes, fabrication schedules, near weld residual stresses, exposure conditions and other system variables. This memorandum discusses the technical issues that may account the differences in cracking tendencies based on a review of the fabrication and operating histories of the reactor systems and the accepted understanding of factors that control stress corrosion cracking in austenitic stainless steels.

The objectives of this study are to determine the intrinsic kinetics and the product layer diffusion rate by minimizing the resistances to gas-phase pore diffusion, and eliminating complications due to pore filling. In the report, a grain model was used to introduce the various potentially rate-limiting processes. It was compared with results obtained with a distributed pore model by Bhatia Perlmutter (1981). Comparing the predicted behavior of the surface areas with conversion, it was even possible to compare experimental results with other models. The conclusion of this study was that, even thought the kinetic parameters obtained with different samples differed much more if product layer diffusion assumed rate-limiting rather than the surface reaction, the shape of the predicted curve approached the experimental findings so much better, that product layer diffusion is indeed most likely to be rate-limiting. (VC)

The objectives of this study are to determine the intrinsic kinetics and the product layer diffusion rate by minimizing the resistances to gas-phase pore diffusion, and eliminating complications due to pore filling. In the report, a grain model was used to introduce the various potentially rate-limiting processes. It was compared with results obtained with a distributed pore model by Bhatia & Perlmutter (1981). Comparing the predicted behavior of the surface areas with conversion, it was even possible to compare experimental results with other models. The conclusion of this study was that, even thought the kinetic parameters obtained with different samples differed much more if product layer diffusion assumed rate-limiting rather than the surface reaction, the shape of the predicted curve approached the experimental findings so much better, that product layer diffusion is indeed most likely to be rate-limiting. (VC)

This document reports the progress made during the first six months of the current three-year DOE grant on Artificially Structured Magnetic Materials.'' However, because some of the results of our previous three-year DOE grant on Artificially Structured Superconductors'' continue to emerge, both topics are addressed in this Progress Report. This report describes progress with DOE funding during the current calendar year; description of the research to be conducted during the remaining six months of the current grant year; a description of the status of the graduate students working on this research; lists of the invited talks, seminars and colloquia, of other recognition of our research, and of the publications crediting DOE sponsorship; and a summary of current and pending federal support. Since the research proposed to be conducted during the next 2 1/2 years is described in detail in our DOE proposal, it is only briefly reviewed here.