This bibliography is divided into the following four sections: Seismicity of Hawaii and Kilauea Volcano; Occurrence, locations and accelerations from large historical Hawaiian earthquakes; Seismic hazards of Hawaii; and Methods of seismic hazard analysis. It contains 62 references, most of which are accompanied by short abstracts.

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the general public. The two principal functions related to this task are (1) operating a general access telephone line, and (2) responding to energy-related correspondence addressed to the Energy Information Administration (EIA). The Energy Information Directory was developed to assist the NEIC staff, as well as other Department of Energy (DOE) staff, in directing inquiries to the proper offices within DOE, other Federal agencies, or energy-related trade associations. The Directory is a list of most Government offices and trade associations that are involved in energy matters. It does not include those DOE offices which do not deal with the public or public information.

The objectives of this study are to determine the intrinsic kinetics and the product layer diffusion rate by minimizing the resistances to gas-phase pore diffusion, and eliminating complications due to pore filling. In the report, a grain model was used to introduce the various potentially rate-limiting processes. It was compared with results obtained with a distributed pore model by Bhatia Perlmutter (1981). Comparing the predicted behavior of the surface areas with conversion, it was even possible to compare experimental results with other models. The conclusion of this study was that, even thought the kinetic parameters obtained with different samples differed much more if product layer diffusion assumed rate-limiting rather than the surface reaction, the shape of the predicted curve approached the experimental findings so much better, that product layer diffusion is indeed most likely to be rate-limiting. (VC)

This test plan directs hydrologic testing activities planned at three existing Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) wells in the 100-HR-3 Operable Unit of the Hanford Site. Three additional wells will be installed near these existing wells and used as additional testing arid observation points during the field activities. Figure 1 shows the locations of the three test sites. A primary objective of the testing program is to provide more detailed hydraulic characterization information for the unconfined aquifer and targeted test sites than provided by the initial reconnaissance-level slug testing of Vukelich. A second objective is to evaluate the applicability of slug interference and dipole flow tests for detailed hydraulic characterization in an unconfined aquifer. This aquifer testing program will also be useful for substantiating hydraulic conductivities reported from previous slug tests and evaluating the effects of filter pack volume/configuration on slug test data. Vukelich recommended additional testing to address the latter two issues.

The objectives of this study are to determine the intrinsic kinetics and the product layer diffusion rate by minimizing the resistances to gas-phase pore diffusion, and eliminating complications due to pore filling. In the report, a grain model was used to introduce the various potentially rate-limiting processes. It was compared with results obtained with a distributed pore model by Bhatia & Perlmutter (1981). Comparing the predicted behavior of the surface areas with conversion, it was even possible to compare experimental results with other models. The conclusion of this study was that, even thought the kinetic parameters obtained with different samples differed much more if product layer diffusion assumed rate-limiting rather than the surface reaction, the shape of the predicted curve approached the experimental findings so much better, that product layer diffusion is indeed most likely to be rate-limiting. (VC)

Xerographic of the suggestion of bankruptcy document in the PWA v Mark William Nelson case.

Suggestion of bankruptcy document in the PWA v Mark William Nelson case.

New waste tanks are to be constructed in H-area to store hazardous low level wastes. AISI Type 304L (304L) stainless steel was recommended as a suitable material of construction for these tanks. Cyclic polarization and coupon tests were performed to evaluate the corrosion resistance of 304L over a wide range of waste tank environments. The results of both tests indicated that 304L was not susceptible to attack under any of these conditions. Comparison tests were also performed with ASTM A537 carbon steel (A537) and Incoloy 825. The carbon steel corroded severely in some of the environments, while Incoloy 825 did not corrode. These tests, along with those for 304L, verified the correlation between cyclic polarization and coupon tests. Electrochemical Impedance Spectroscopy (EIS) was performed to monitor the breakdown of the protective oxide film on the surface of the material as a function of time and temperature. These results also correlated with those from the cyclic polarization and coupon tests.

This study was conducted to determine the most cost-effective transportation investment for the Northwest Corridor. It outlines existing transportation problems and summarizes the alternative designs considered to address these problems. It documents the selection of the locally preferred alternative (LPA) design. The report is intended to inform the preliminary engineering and environmental assessment stage of development.

Advanced electronic magnetic resonance (EMR) methods are used to examine properties of coals, chars, and molecular species related to constituents of coal. During this grant period, progress was made on setting up a separate high frequency EMR system particularly appropriate for such studies and exploring the use of low-frequency dynamic nuclear polarization (DNP) to examine the interaction between fluids such as water and the surface of suspended char particles.

The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992.

Fluor Daniel Hanford, Inc. and its major subcontractors are in agreement that environmental monitoring performed under the Project Hanford Management Contract is to be done in accordance with a single, integrated program. The purpose of this Integration Plan for Environmental Monitoring is to document the policies, systems, and processes being put in place to meet one key objective: manage and integrate a technically competent, multi-media ambient environmental monitoring program, in an efficient, cost effective manner. Fluor Daniel Hanford, Inc. and its major subcontractors also commit to conducting business in a manner consistent with the International Standards Organization 14000 Environmental Management System concepts. Because the integration of sitewide groundwater monitoring activities is managed by the Environmental Restoration Contractor, groundwater monitoring it is outside the scope of this document. Therefore, for the purpose of this Integration Plan for Environmental Monitoring, the Integrated Environmental Monitoring Program is defined as applicable to all environmental media except groundwater. This document provides recommendations on future activities to better integrate the overall environmental monitoring program, with emphasis on the near-field program. In addition, included is the Fluor Daniel Hanford, Inc. team review of the environmental monitoring activities on the Hanford Site, with concurrence of Pacific Northwest National …

A memo from Vicki Rosenberg, program officer for the Getty Center for Education in the Arts, to the Regional Institute Directors and the 1996 Regional Institute Director's Meeting participants. The memo is in regards the cross-site report of the Regional Institute projects with important recommendations. cc'd on the memo, Julie Abel, Blanche Rubin, Leilani Lattin Duke and Brent Wilson. Attached to the memo is the Cross-Site Evaluation of Getty Center Professional Development Programs: The California, Florida, Nebraska, Ohio, Tennessee, and Texas Regional Institutes; And The Cranbrook, Kutztown, And Hands And Minds Seminars For Art Specialists 1995 by Brent Wilson, Blanche Rubin with Miki Baumgarten, Bonne Mac Donald, Billie Sessions, Pamela Taylor and Mary Tien.

The first quarter of this project was used to carry out a detailed planning process to coordinate the various aspects of this collaborative effort. A workshop was held at Brown University on December 4, 1996, attended by all project participants and key visitors, in which presentations were given by the principal investigators on their respective subtasks. The planning process culminated in the completion of a comprehensive document submitted to DOE / FETC under separate cover. Following the planning exercise, research work was initiated and will be continued in the second project quarter.

This document provides the test plan and procedure forms for conducting the functional and operational acceptance testing of the K Basin Sludge Canister and Floor Sampling Device(s). These samplers samples sludge off the floor of the 100K Basins and out of 100K fuel storage canisters.

None

This test report describes the Phase 1 testing and results of the ResonantSonic drilling method. This effort was conducted as part of a Cooperative Research and Development Agreement (CRADA) between the US Department of Energy, Pacific Northwest Laboratory, Westinghouse Hanford Company and Water Development Corporation. The purpose of this demonstration was to evaluate the Water Development Corporation`s ResonantSonic drilling system, modify components as necessary and determine compatible drilling applications for the ResonantSonic drilling method for use at facilities in the DOE complex and private industry. Initially, the ResonantSonic drill was used to drill several test holes at the Drilling Technology Test Site to assess the feasibility of drilling vertical and angle holes. After this initial phase, a 45 degree angle vapor extraction well was drilled to a depth of 168 feet at the 200 West Carbon Tetrachloride Site. This well was drilled and completed in nine days. Extensive geologic and vapor sampling were conducted while drilling this well. In addition, testing was also conducted at the test site to evaluated drilling with larger diameter casing (8 5/8 inch). Evaluation of the Resonant Sonic drilling method will be continued during the Phase 2 portion of testing to determine if improvements to …

The main purpose and objective of this analysis is to design a Box-Cut at the ESF South Portal to accommodate the Tunnel Boring Machine's (TBM) exit at the conclusion of the ESF Main Loop construction. The stability of the Highwall and the sidewalls at the Box-Cut are assessed using analytical methods by numerical modeling techniques. A ground reinforcement system for the South Ramp Box-Cut slopes will be recommended. This report summarizes the results of the analyses and provides the details of the recommended ground reinforcement system for the Box-Cut slopes at the South Portal. The reinforcement design details are then incorporated into design output documents for implementation in the field. Method of excavation for the Box-Cut is also discussed and a recommendation is provided in this analysis.

This calculation applies to the Constructor's design of the proposed jacking bracket for the W6 x 20 steel set. The specific features of the jacking bracket evaluated in this analysis are the shear on the bracket bolts, and the effects of the applied moment on the W6 x 20 steel set beam segment.

None

Resale price maintenance occurs when manufacturers control the prices charged by wholesalers or retailers of their products. In Japan, such activities are prohibited, although certain exemptions are allowed. The U.S. concern over the practice is that it could allow Japanese firms to generate a secure profit base in their home market in order to finance aggressive price competition abroad.

This publication presents statistical data on the following topics: Energy Consumption; Petroleum; Natural Gas; Oil and Gas Resource Development; Coal; Electricity; Nuclear Energy; Energy Prices; and International Energy. Appendices are included on: Thermal Conversion Factors; Metric and Other Physical Conversion Factors; Carbon Dioxide Emission Factors for Coal. A Glossary is included.

The Eppendorf-Biotronik Model IC 2001-2, a portable field ruggedized ion chromatography instrument, was rigorously tested at the DOE Advanced Waste Water Treatment Plant, Fernald, Ohio. This instrument rapidly detected the uranium concentration in water, and has a detection limit in the low ppb range without using the sample concentrating feature. The test set of samples analyzed included: ``Real World`` water samples from the AWWT containing uranium concentrations in the 9--110 ppb range, a sample blank, and a performance evaluation sample. The AWWT samples contained sets of both raw water and acid-preserved water samples. Selected samples were analyzed in quadruplicate to asses the instrument`s precision, and these results were compared with the results from an off-site confirmatory laboratory to assess the instrument`s accuracy. Additional comparisons with on-site laboratory instruments, Chemcheck KPA-11 and Scintrex UA-3 are reported. Overall, the Eppendorf-Biotronik IC 2001-2 performed exceptionally well providing a detection limit in the low ppb region (< 10 ppb) and giving rapid (< 5 minutes) accurate and reproducible analytical results for the AWWT, ``real world``, water samples with uranium concentrations in the region of interest (10--40 ppb). The per sample operating cost for this instrument is equivalent to the per sample cost for the …

This document details the results of software acceptance testing of gas characterization systems. The gas characterization systems will be used to monitor the vapor spaces of waste tanks known to contain measurable concentrations of flammable gases.