Four fault tolerant architectures were evaluated for their potential reliability in service as control systems of nuclear power plants. The reliability analyses showed that human- and software-related common cause failures and single points of failure in the output modules are dominant contributors to system unreliability. The four architectures are triple-modular-redundant (TMR), both synchronous and asynchronous, and also dual synchronous and asynchronous. The evaluation includes a review of design features, an analysis of the importance of coverage, and reliability analyses of fault tolerant systems. An advantage of fault-tolerant controllers over those not fault tolerant, is that fault-tolerant controllers continue to function after the occurrence of most single hardware faults. However, most fault-tolerant controllers have single hardware components that will cause system failure, almost all controllers have single points of failure in software, and all are subject to common cause failures. Reliability analyses based on data from several industries that have fault-tolerant controllers were used to estimate the mean-time-between-failures of fault-tolerant controllers and to predict those failures modes that may be important in nuclear power plants. 7 refs., 4 tabs.

The use of a 1-kg solid-lithium x-ray and debris shield around each fusion fuel pellet prevents vaporization of, and destructive shock waves in, the Cascade blanket granules thereby increasing their lifetime. The shield vaporizes as it absorbs energy and the vapor flows into the blanket several centimeters. The shield also increases tritium breeding and enhances vacuum pumping of high Z materials that are vaporized in the fuel pellet. Using heavy ion beams allows illumination of the fuel pellets with the restricted geometry present in Cascade. We used a 5 MJ driver with 18 beams (one 3 {times} 3 array from each end).

Schlieren imaging techniques were used to study the density depressions created by the ATA electron beam 37 cm after the entrance foil. Typical channel depressions were 5--10% of ambient density per pulse. Under IFR guiding channel depths as deep as 30% were seen on single pulse operation. Pulse 5 of the 5 pulse burst has passed through a channel reduced to 30% of ambient density. To lowest order, one would expect channel density depressions to scale as ({Delta}n/n) {proportional to} ({number sign} of pulses * I{sub beam}/channel area). Channel depth observations scaled roughly with beam current, {number sign} of pulses, and inversely with channel area. Pressure scaling was anomalous in that {Delta}n appeared to be less sensitive to pressure than the linear dependence expected. This would require that the energy deposition (stopping power) is independent of pressure and is a surprising result which can only be explained with collective effects. Scaling of channel expansion rates with pressure suggest classical diffusion (D {proportional to} 1/n) for times up to 200 mS. During these early times, the diffusion constant was, however, 3--5 times larger than the classical value. At later times, large scale turbulence was observed and the effective diffusion constant increased …

Fe, Ni, and V are considered trace impurities in heavy crude oils and tar sand bitumens. In order to understand the importance of these metals, we have examined several properties: (1) bulk metals levels, (2) distribution in separated fractions, (3) size behavior in feeds and during processing, (4) speciation as a function of size, and (5) correlations with rheological properties. Some of the results of these studies show: (1) V and Ni have roughly bimodal size distributions, (2) groupings were seen based on location, size distribution, and Ni/V ratio of the sample, (3) Fe profiles are distinctively different, having a unimodal distribution with a maximum at relatively large molecular size, (4) Fe concentrations in the tar sand bitumens suggest possible fines solubilization in some cases, (5) SARA separated fractions show possible correlations of metals with asphaltene properties suggesting secondary and tertiary structure interactions, and (6) ICP-MS examination for soluble ultra-trace metal impurities show the possibility of unexpected elements such as U, Th, Mo, and others at concentrations in the ppB to ppM range. 39 refs., 13 figs., 5 tabs.

Two articles, one written by Elaine Schad titled 'The Art of Teaching Art' and another by Susan Shelton titled 'Denton school participates in art program', for the Denton Record-Chronicle. Both pieces cover art education in local schools and the help of NTIEVA and their teaching of DBAE.

We have developed an assay for detecting variant erythrocytes that occur as a result of in vivo allele loss at the glycophorin A (GPA) locus on chromosome 4 in humans. This gene codes for an erythroid- specific cell surface glycoprotein, and with our assay we are able to detect rare variant erythrocytes that have lost expression of one of the two GPA alleles. Two distinctly different variant cell types are detected with this assay. One variant cell type (called N{O}) is hemizygous. Our assay also detects homozygous variant erythrocytes that have lost expression of the GPA(M) allele and express the GPA(N) allele at twice the heterozygous level. The results of this assay are an enumeration of the frequency of N{O} and NN variant cell types for each individual analyzed. These variant cell frequencies provide a measure of the amount of somatic cell genotoxicity that has occurred at the GPA locus. Such genotoxicity could be the result of (1) reactions of toxic chemicals to which the individual has been exposed, or (2) high energy radiation effects on erythroid precursor cells, or (3) errors in DNA replication or repair in these cells of the bone marrow. Thus, the GPA-based variant cell frequency …

A subroutine which calculates the absorption of short pulse electromagnetic radiation in a material has been installed into the laser fusion modeling program called LASNEX. Calculational results show the necessity for NLTE physics to account for ionization, the development of non-exponential density profiles for the expanding plasma and movement of the critical point toward the surface which results in Doppler shifts of the reflected light. Comparison of calculations of local scale lengths with experiments shows not only good agreement but the correct scaling with intensity. 8 refs., 5 figs.

Significant progress has been made toward solving the century-old problem of chromatic aberrations in diffractive optics. Our approach exploits modern materials and microfabrication technology and is very different from the purely diffractive strategy,'' which is commonly employed and which results in multiple diffractive elements separated by a finite distance. We have developed a Fresnel zone plate lens comprised of a serial stack of patterned minus-filters which allows broadband radiation to be focused (or imaged) without longitudinal or transverse chromatic aberrations. 7 refs., 4 figs.

Catalytic studies on a new method for methanol synthesis from CO and H{sub 2} in a slurry reactor are described. This reaction proceeds through the carbonylation of methanol to methyl formate in the liquid phase followed by hydrogenolysis of methyl formate to two molecules of methanol; the net result is the reaction of CO with H{sub 2} to give methanol. Moderate temperatures and pressures (100--160{degrees}C, 50--65 atm) are used. Reaction rates using mixed catalysts comprised of an alkali methoxide and Cu-chromite are presented. It seems likely that Cu-chromite maintains the activity of the alkali methoxide catalyst. A mixed catalyst comprised of potassium methoxide and Cu-chromite was found to be the most active under the reaction conditions used. Evidence is provided for an interaction between the alkali methoxide and Cu-chromite. 27 refs., 6 figs., 2 tabs.

A new ground state source of negative hydrogen ions with polarized nuclei ({rvec H}{sup {minus}}) is being developed at BNL. Extensive developmental research has been aimed at improving each element of ({rvec H}{sup {minus}}) production: cold H{degrees} beam, spin selection and focusing magnets, and ionizer. These elements have recently been integrated into a source. A first test with the accommodator nozzle cooled only to liquid nitrogen temperatures resulted in 5 {mu}A of H{sup {minus}}. Tests at liquid helium temperatures are now beginning. 7 refs., 1 fig.

The Advanced Light Source (ALS) is a synchrotron radiation facility nearing completion at LBL. As a third-generation machine, the ALS is designed to produce intense light from bend magnets, wigglers, and undulators (insertion devices). The facility will include a 50 MeV electron linear accelerator, a 1.5 GeV booster synchrotron, beam transport lines, a 1--2 GeV storage ring, insertion devices, and photon beam lines. Currently, the beam injection systems are being commissioned, and the storage ring is being installed. Electron beam position monitors (BPM) are installed throughout the accelerator and constitute the major part of accelerator beam diagnostics. The design of the BPM instruments is complete, and 50 units have been constructed for use in the injector systems. We are currently fabricating 100 additional instruments for the storage ring. In this paper I discuss engineering fabrication, testing and performance of the beam pickup electrodes and the BPM electronics.

The Advanced Light Source (ALS) is a synchrotron radiation facility nearing completion at LBL. As a third-generation machine, the ALS is designed to produce intense light from bend magnets, wigglers, and undulators (insertion devices). The facility will include a 50 MeV electron linear accelerator, a 1.5 GeV booster synchrotron, beam transport lines, a 1--2 GeV storage ring, insertion devices, and photon beam lines. Currently, the beam injection systems are being commissioned, and the storage ring is being installed. Electron beam position monitors (BPM) are installed throughout the accelerator and constitute the major part of accelerator beam diagnostics. The design of the BPM instruments is complete, and 50 units have been constructed for use in the injector systems. We are currently fabricating 100 additional instruments for the storage ring. In this paper I discuss engineering fabrication, testing and performance of the beam pickup electrodes and the BPM electronics.

An imaging beamline based on a Kirkpatrick-Baez mirror configuration has been designed to image the electron beam in the ALS storage ring, to measure its size and shape. The electron beam emittance will be small ({epsilon}h = 3.4 {times} 10{sup {minus}9} m rad) and the quality of the image is extremely sensitive to surface figure distortion of the mirrors. Thermal distortions and surface temperatures have been calculated for radiatively cooled mirrors of various materials in a search for a simple design which avoids water cooling. The choice of mirror material and the thermal and mechanical design is discussed. 6 refs.

An imaging beamline based on a Kirkpatrick-Baez mirror configuration has been designed to image the electron beam in the ALS storage ring, to measure its size and shape. The electron beam emittance will be small ({epsilon}h = 3.4 {times} 10{sup {minus}9} m rad) and the quality of the image is extremely sensitive to surface figure distortion of the mirrors. Thermal distortions and surface temperatures have been calculated for radiatively cooled mirrors of various materials in a search for a simple design which avoids water cooling. The choice of mirror material and the thermal and mechanical design is discussed. 6 refs.

The program for providing water cooled metal optics for the Advanced Light Source at Berkeley is reviewed with respect to fabrication and metrology of the surfaces. Materials choices, surface figure and smoothness specifications, and metrology systems for measuring the plated metal surfaces are discussed. Results from prototype mirrors and grating blanks will be presented, which show exceptionally low microroughness and mid-period error. We will briefly describe out improved version of the Long Trace Profiler, and its importance to out metrology program. We have completely redesigned the mechanical, optical and computational parts of the profiler system with the cooperation of Peter Takacs of Brookhaven, Continental Optical, and Baker Manufacturing. Most important is that one of our profilers is in use at the vendor to allow testing during fabrication. Metrology from the first water cooled mirror for an ALS beamline is presented as an example. The preplating processing and grinding and polishing were done by Tucson Optical. We will show significantly better surface microroughness on electroless nickel, over large areas, than has been reported previously.

The program for providing water cooled metal optics for the Advanced Light Source at Berkeley is reviewed with respect to fabrication and metrology of the surfaces. Materials choices, surface figure and smoothness specifications, and metrology systems for measuring the plated metal surfaces are discussed. Results from prototype mirrors and grating blanks will be presented, which show exceptionally low microroughness and mid-period error. We will briefly describe out improved version of the Long Trace Profiler, and its importance to out metrology program. We have completely redesigned the mechanical, optical and computational parts of the profiler system with the cooperation of Peter Takacs of Brookhaven, Continental Optical, and Baker Manufacturing. Most important is that one of our profilers is in use at the vendor to allow testing during fabrication. Metrology from the first water cooled mirror for an ALS beamline is presented as an example. The preplating processing and grinding and polishing were done by Tucson Optical. We will show significantly better surface microroughness on electroless nickel, over large areas, than has been reported previously.

We review the implications of adding a flavor doublet of color sextet quarks to QCD. Theoretical attractions include -- ``minimal`` dynamical symmetry breaking of the electroweak interaction, solution of the Strong CP problem via the ``heavy axion`` {eta}{sub 6}, and Critical Pomeron Scaling at asymptotic energies. Related experimental phenomena, which there may be evidence for, include -- production of the {eta}{sub 6} at LEP, large cross-sections for W{sup +}W{sup {minus}} and Z{sup o}Z{sup o} pairs and very high energy jets in hadron colliders, and a hadronic threshold above which high-energy ``exotic`` diffractive processes appear in Cosmic Ray events.

We review the implications of adding a flavor doublet of color sextet quarks to QCD. Theoretical attractions include -- minimal'' dynamical symmetry breaking of the electroweak interaction, solution of the Strong CP problem via the heavy axion'' [eta][sub 6], and Critical Pomeron Scaling at asymptotic energies. Related experimental phenomena, which there may be evidence for, include -- production of the [eta][sub 6] at LEP, large cross-sections for W[sup +]W[sup [minus]] and Z[sup o]Z[sup o] pairs and very high energy jets in hadron colliders, and a hadronic threshold above which high-energy exotic'' diffractive processes appear in Cosmic Ray events.

The performance of the 1986 three-dimensional numerical model of the Nesjavellir geothermal field for predicting the deliverabilities and pressure decline of the wells during the period 1987 through 1991 is investigated. The model predicted adequately the flow rate and enthalpy transients of most wells, but overpredicted the pressure decline by 3 to 4 bars.

Estimates of temperatures, past and present, in geothermal reservoirs can be made by using now standard mineralogical techniques, including fluid inclusion geothermometry, vitrinite reflectance, calc-silicate and clay occurrence, the extent of clay interlayering, and measuring clay crystallinity. Recent studies of clays in 60 drillcores from 6 wells at Wairakei, for example, show an inverse relationship between reservoir temperatures and crystallinities from 90&deg; to 225&deg;C (195 to 435°F) (K&uuml;bler Indices: 1.40 to 0.44 <FONT FACE="Symbol">D</FONT>&deg;2<FONT FACE="Symbol">q</FONT>). Fluid inclusion geothermometry results require careful interpretation but the method need not be calibrated with respect to the reservoir, as do other geothermometric methods.

It presents a systematic methodology to evaluate the reservoir characteristics of Chipilapa- Ahuachapan geothermal field through the highly diluted natural manifestations (springs and domestic wells) in its surroundings. The manifestations are classified in three main groups according to their mechanism of formation: high salinity water (HSW), medium salinity water (MSW), and Sulfated Water (SW). The reservoir temperature at Chipilapa geothermal field is around 220°C which is estimated with application of various chemical geothermometers. The isotopic studies indicate that the heating of local meteoric water with the separated steam of deep reservoir fluids is a dominating process in the formation of springs and domestic wells fluids. The process of formation of primary and secondary vapor explains the isotopic composition of fumaroles.

The Bulalo geothermal field, located in Laguna province, Philippines, supplies 12% of the electricity on the island of Luzon. The first 110 MWe power plant was on line May 1979; current 330 MWe (gross) installed capacity was reached in 1984. Since then, the field has operated at an average plant factor of 76%. The National Power Corporation plans to add 40 MWe base load and 40 MWe standby in 1995. A numerical simulation model for the Bulalo field has been created that matches historic pressure changes, enthalpy and steam flash trends and cumulative steam production. Gravity modeling provided independent verification of mass balances and time rate of change of liquid desaturation in the rock matrix. Gravity modeling, in conjunction with reservoir simulation provides a means of predicting matrix dry out and the time to limiting conditions for sustainable levelized steam deliverability and power generation.

Adsorption is potentially an important consideration when calculating reserves at The Geysers. Our investigations of the mineralogical relationships in core samples have shown matrix pore spaces to be largely associated with fractures. Dissolution of calcite from hydrothermal veins increases porosity in the graywacke reservoir. The high relative surface area of secondary alteration phases could promote adsorption. In order to quantify porosity distribution and surface area, Scanning Electron Microscope (SEM) images were analyzed using software developed for the interpretation of satellite imagery, This software classifies the images as either crystal or pore and then accumulates data on pore size, total porosity and surface area of the mineral-pore interface. Review of literature shows that data on thickness of adsorbed water layer does not exist for many of the mineral phases of interest in The Geysers. We have assumed thicknesses of 10, 100, and 5300 Angstroms for the adsorbed layer and calculated the relative proportions of adsorbed water. These calculations show 0.005%, 0.05%, and 2.5% of total water would be adsorbed using the above thicknesses.

A general empirical correlation for estimating the intrinsic dissolution rate of quartz in pure water from 25” to 625°C was presented. Data obtained from five different apparatus in this study correlated favorably to rate measurements reported by seven other research groups using both nominal and BET-determined surface area bases. More than eleven orders of magnitude of variation of dissolution rate occur over a 600°C temperature change exhibiting Arrhenius-like behavior with a global activation energy of about 97 kJ/mol SiO₂. Discrepancies in low temperature (25°C) measurements were resolved by waiting sufficiently long to permit annealing processes to produce a “steady-state” dissolving surface.