The following report describes the usage of tin-foil to obtain a mechanical joint of low electrical resistance while providing a seal to hold water at a pressure of 300 psi.

The following report describes a gaseous scintillation counting system, including the production and operation of the counter.

The following report examines the trapping of charged particles, fast electrons especially, within the geomagnetic field.

The following document describes the usage and results of sending pulsed beams of electrically charged particles with electrically wide range of pulse lengths and pulse repetition rates.

Introduction: "It is the purpose of this note to describe the construction and operation of the plasma injectors used in the magnetic high compression experiments in progress at the Lawrence Radiation Laboratory at Livermore. As the investigations of these injections is still in progress, remarks concerning their operation or the characteristics of the injected plasma are of a tentative nature."

This report is a bibliography divided into two sections: one that documents books and journal articles, the other containing classified and unclassified documents, that are based around gaseous detonation. These sources cover the period between 1941 to October of 1957.

Abstract: "The energy gained by a deuterium plasma, from a three megacycle per second radiofrequency field, was studied experimentally. A static magnetic field, in the form of a "mirror", was used. The coil of an rf resonant circuit, placed at the center of the machine produced a time-varying magnetic field parallel to the static field. This, in turn, induced an electrical field, in an azmuthal direction, which acted on the ions. When this was in synchronism with the cyclotron frequency, the ions could pick up energy. At this resonance the light intensity from the plasma increased markedly. This effect was used as evidence for the transfer of energy to the ions."

Abstract. The preparation and properties of a new explosive, liquid over the range -65 degrees F to +165 degrees F, are presented. This explosive, called NTN, is a 5/1/1 mole ration of nitromethane, tetranitromethane, 1 -nitropropane. The sensitivity and stability of NTN meet military requirements.

The most important component required for the Astron experimental facility is a high energy, high current, pulsed electron accelerator. A thin cylindrical layer of high energy electrons trapped within an axially symmetric magnetic field is the key feature of the Astron thermonuclear device. The trapping magnetic field is constant in time. Therefore, it is not possible to inject electrons and trap the electrons in this field unless during the injection phase a part of the electron energy is absorbed by some friction process. This is accomplished by means of eddy currents generated on suitable passive circuits by the current of the injected electron bunch. This method has ben described elsewhere. However, in order to achieve an effective loss mechanism the current of the injected electron beam must be over one hundred amps. Such high current beams are difficult to handle except if the electron energy is high enough so that the electrostatic repulsive force is compensated to great extent by attractive magnetive forces. Hence the electron energy required is 5 Mev or higher. Other requirements on the electron layer yield the same result.

In previous letters we have reported a Av resonance, called Y*1, observed through the study of the interaction of 1.15-Bev/c K* mesons in hydrogen in the Lawrence Radiation Laboratory 15-in. bubble chamber. We now wish to report the results of the study of the three reactions [formula](1), [formula](2) and [formula](3).

Progress report on programs in target research and in accelerator research.

This technical report describes the digital computer codes used for the aerothermodynamic calculations that were involved in evaluating the Tory II-A reactor.

This report is an outgrowth of the MURA Users' Conference of June 1959. At that conference the group on beam separators discussed the problem of whether particle separation could be achieved at the machine energies under consideration. A preliminary version of the scheme outlined here was given at the conference. Later, after flaws were discovered, it was modified. The attempt is not to show that this is the way it should be done, but to show with reasonable certainty that there is at least one way it can be done.

An exact treatment of the structure of tracks in nuclear research emulsion recently was attempted with some success. Many of the proofs also appear to be generally valid for bubble tracks in Wilson chambers. This is a summary of the results that are applicable to tracks of charged particles in bubble chambers.

The 9-ANGIE, one of a series of reactor neutronic programs for an IBM 709 or 7090 data processing system, solves the time-dependent, multi-group, neutron diffusion equation for one to eighteen energy groups applied to a rectangular mesh superimposed on either an x-y or an r-z plane. It is characterized by its generalities in region description, boundary conditions, etc., without sacrificing simplicity of input preparation and ease of machine operation. The notation, the style, and the format have been held as consistent as possible with 9-ZOOM, the companion one-dimensional program.

The nuclide Hf182 has been made by thermal-neutron irradiation of hafnium oxide and has been found to have a half-life of 8.5 x 10(6) years. A preliminary study ha been made of possible radiations associated with the nuclide.