A review is given of present and planned combustible radioactive waste treatment systems in the US. Advantages and disadvantages of various systems are considered. Design waste streams are discussed in relation to waste composition, radioactive contaminants by amount and type, and special operating problems caused by the waste.

Significant progress has been made toward solving the century-old problem of chromatic aberrations in diffractive optics. Our approach exploits modern materials and microfabrication technology and is very different from the purely diffractive strategy,'' which is commonly employed and which results in multiple diffractive elements separated by a finite distance. We have developed a Fresnel zone plate lens comprised of a serial stack of patterned minus-filters which allows broadband radiation to be focused (or imaged) without longitudinal or transverse chromatic aberrations. 7 refs., 4 figs.

We consider the negative ion concentrations in hydrogen discharges caused by electron excitation and dissociative attachment processes. The principal formation and destruction processes are discussed for electron densities in the range 10/sup 8/ to 10/sup 13/ electrons cm/sup -3/. Expressions are developed for calculating the high energy portion of the electron energy distribution in the discharge; using these energy distributions the electron excitation rates are evaluated. At low densities, the vibrational distribution arises from singlet electronic excitations and triplet excitations through the /sup 3/..pi../sub u/ state, in equilibrium with wall de-excitation processes. At high densities singlet excitations predominate in equilibrium with atom-molecule de-excitation processes. Possibilities for negative ion generation in a two-chamber tandem system are discussed in which the vibrational excitation occurs in a high power, high electron temperature discharge, kT/sub e/ = 5 eV, and dissociative attachment occurs in a low temperature kT/sub e/ = 1 eV, plasma chamber.

The Spin Spectrometer at the Holifield Heavy Ion Research Facility (HHIRF) is a multidetector ..gamma..-ray spectrometer consisting of 72 separate NaI detector elements closely packed in a 4..pi.. geometry. The basic apparatus was constructed at Washington University and has been installed and implemented at the HHIRF at Oak Ridge National Laboratory. The spectrometer was designed especially for the investigation of the mechanisms of heavy-ion induced nuclear reactions and of the structure of nuclei with high angular momentum. The data acquisition system is described. (WHK)

Computer graphics which are useful for displaying and analyzing data are presented. Many classical and several newly developed graphical techniques in statistical data analysis are presented for small univariate and multivariate data sets. These include histograms, empirical density functions, pie charts, contour plots, a discriminant analysis display, cluster analysis, Chernoff ''faces,'' and Andrews' sine curves. Recent advances in data collection technology and computer data base management systems have made it imperative to utilize computer graphics for large data sets. Several innovative graphical techniques are presented to handle this situation. Spatial relationships among the data (particularly geographic data) are difficult to conceptualize. Several cartographic techniques are presented which enhance the understanding of these spatial relationships within the data.

The gun injects axially into a drift tank followed by a magnetic mirror. For the experiments reported here, only the guide coils outside the vacuum vessel and solenoids on the plasma gun electrodes were used; the mirror coil was not energized. A stainless steel flux conserver is placed in the mirror throat to prevent the plasma from contacting the nonconducting vacuum wall in the region of the mirror. An axis encircling array of magnetic loop probes includes four diamagnetic loops and a loop which measures the azimuthally averaged outward pointing radial component of magnetic field. These loop probes are stainless steel jacketed and form a flux conserving boundary (at a radius = 30 cm) for plasma emitted from the gun. A five tip probe that can be positioned anywhere along the axis of the experiment is used to measure internal components of magnetic field.

This report describes our initial attempts at the molecular characterization of a maize controlling element. We have prepared a cDNA probe and used it to detect changes at a locus where Ds elements are found. Evidence of their presence are indicated by changes in the restriction patterns, but there is as yet no information on the physical nature of the controlling elements nor on the kinds of rearrangements they cause.

None

Information is presented concerning assessments of current seismic design methods; systematic evaluation program for older operating reactors; seismic vulnerability of fuel reprocessing facilities; and advisability of seismic scram.

It was shown that a microsphere within the structure limitations is hydrodynamically stable. To insure its perfect formation, the initial chemical compositions must have a blowing capability, more important, the resultant liquid compositions must also have sufficient surface tension and low viscosity.

An imaging beamline based on a Kirkpatrick-Baez mirror configuration has been designed to image the electron beam in the ALS storage ring, to measure its size and shape. The electron beam emittance will be small ({epsilon}h = 3.4 {times} 10{sup {minus}9} m rad) and the quality of the image is extremely sensitive to surface figure distortion of the mirrors. Thermal distortions and surface temperatures have been calculated for radiatively cooled mirrors of various materials in a search for a simple design which avoids water cooling. The choice of mirror material and the thermal and mechanical design is discussed. 6 refs.

The TMX-U magnet set has incorporated new axisymmetric throttle coils and fan-reversing transition magnets. This new magnet geometry, which will allow for the experimental verification of new physics issues related to axicell tandem mirrors, encompasses both engineering and physics considerations. Engineering considerations include structural integrity plus neutral beam and diagnostic access. Physics issues include the stability and radial transport of the confined plasma. We have calculated the magnetic field using the magnetic field code, EFFI, and the plasma stability and surface curvatures using the plasma stability code, TEBASCO. Our magnet design allows the axisymmetric throttle mirror to be varied from the end-cell mirror value of 2 to a peak of 6 T.

The conceptual design of an ICF tritium production reactor is described. The chamber design uses a beryllium multiplier and a liquid lithium breeder to achieve a tritium breeding ratio of 2.08. The annual net tritium production of this 532 MW/sub t/ plant is 16.9 kg, and the estimated cost of tritium is $8100/g.

The Advanced Light Source (ALS) is a synchrotron radiation facility nearing completion at LBL. As a third-generation machine, the ALS is designed to produce intense light from bend magnets, wigglers, and undulators (insertion devices). The facility will include a 50 MeV electron linear accelerator, a 1.5 GeV booster synchrotron, beam transport lines, a 1--2 GeV storage ring, insertion devices, and photon beam lines. Currently, the beam injection systems are being commissioned, and the storage ring is being installed. Electron beam position monitors (BPM) are installed throughout the accelerator and constitute the major part of accelerator beam diagnostics. The design of the BPM instruments is complete, and 50 units have been constructed for use in the injector systems. We are currently fabricating 100 additional instruments for the storage ring. In this paper I discuss engineering fabrication, testing and performance of the beam pickup electrodes and the BPM electronics.

A review is presented of heavy quark production in {bar p}p, {pi}{sup -}p, and pp interactions at fixed target and collider energies. Calculations of total cross sections and of single quark inclusive differential cross sections d{sup 2}{sigma}/dk{sub T}dy are described including contributions through next-to-leading order in QCD perturbation theory. Comparisons with available data on charm and bottom quark production show good agreement for reasonable values of the charm and bottom quark masses and other parameters. Predictions and open issues in the interpretation of results are summarized. 20 refs., 5 figs.

We present here the concept of x-ray FELs using high gain, single-pass amplifiers with electron beams accelerated in high gradient structures powered by relativistic klystrons. Other authors have also considered x-ray FELs; the unique aspect of this paper is the use of high gradient acceleration. One of the authors has previously presented preliminary studies on this concept. The intent in this paper is to display the results of a top level design study on a high gain FEL, to present its sensitivity to a variety of fabrication and tuning errors, to discuss several mechanisms for increasing gain yet more, and to present explicitly the output characteristics of such an FEL. The philosophy of the design study is to find a plausible operating point which employs existing or nearly existing state-of-the-art technologies while minimizing the accelerator and wiggler lengths. The notion is to distribute the technical risk as evenly as possible over the several technologies so that each must advance only slightly in order to make this design feasible. This study entailed no systematic investigation of possible costs so that, for example, the sole criterion for balancing the trade-off between beam energy and wiggler length is that the two components have …

The vaporization of core-concrete mixtures is being measured using a transpiration method. Mixtures of stainless steel, concrete (limestone or basaltic) and urania (doped with La/sub 2/O/sub 3/, SrO, BaO, and ZrO/sub 2/) are vaporized at 2150 - 2400 K from a zirconia crucible into flowing He - 6% H/sub 2/ gas. Up to 600 ppM H/sub 2/O is added to the gas to fix the partial molar free energy of oxygen in the range -420 kJ to -550 kJ. The fraction of the sample that is vaporized is determined by weight change and by chemical analyses on the condensates that are collected in an Mo condenser tube. The results are being used to test the thermodynemic data base and the underlying assumptions of computer codes used for prediction of release during the severe accident. 13 refs., 2 tabs.

The computer control system used on the twelve Neutral Beams of the 2XIIB experiment at the Lawrence Livermore Laboratory (LLL) has evolved over the last three years. It is now in its final form and in regular use. It provides automatic data collection, reduction, and graphics presentation, as well as automatic conditioning, automatic normal operation, and processing of calorimeter data. This paper presents an overview of the capabilities and implementation of the current system, a detailed discussion of the automatic conditioning algorithm, and discusses the future directions for neutral beam automation.

Four manuals containing methods for the accountability of plutonium nitrate solutions, plutonium dioxide, uranium dioxide and mixed uranium-plutonium oxide have been prepared by us and issued by the U.S. Nuclear Regulatory Commission. A similar manual on methods for the accountability of uranium and plutonium in reprocessing plant dissolver solutions is now in preparation. In the present paper, we discuss the contents of the previously issued manuals and give a preview of the manual now being prepared.

A model for H/sup -/, D/sup -/ production by energetic particles reflecting from metal surfaces is discussed. The model employs the energy and angular distribution data derived from the Marlowe code. The model is applied to particles incident normally upon Cs, Ni, and Cs/Ni surfaces.

The proceedings of six work groups that discussed techniques to prevent and abate noise, hydrogen sulfide emissions, and accidental spills of chemicals and geothermal wastes at The Geysers-Calistoga KGRA are reported. Problems associated with well completion and production, and with systems, components, and materials, and their effects on emissions were also discussed. The comments and recommendations of the work groups are included in the proceedings. (MHR)

The program for providing water cooled metal optics for the Advanced Light Source at Berkeley is reviewed with respect to fabrication and metrology of the surfaces. Materials choices, surface figure and smoothness specifications, and metrology systems for measuring the plated metal surfaces are discussed. Results from prototype mirrors and grating blanks will be presented, which show exceptionally low microroughness and mid-period error. We will briefly describe out improved version of the Long Trace Profiler, and its importance to out metrology program. We have completely redesigned the mechanical, optical and computational parts of the profiler system with the cooperation of Peter Takacs of Brookhaven, Continental Optical, and Baker Manufacturing. Most important is that one of our profilers is in use at the vendor to allow testing during fabrication. Metrology from the first water cooled mirror for an ALS beamline is presented as an example. The preplating processing and grinding and polishing were done by Tucson Optical. We will show significantly better surface microroughness on electroless nickel, over large areas, than has been reported previously.

California has the most abundant known reserves of geothermal resources in the nation, and California State government has taken several important actions to accelerate the environmentally acceptable development of geothermal energy. The roles played by various California State government agencies and the legislature to accomplish this goal are discussed.

We will review the performance of the Advanced Test Accelerator, a 50 MeV, 10 KA induction linac. The discussion will cover the operation of the plasma cathode electron source, beam transport throughout the accelerator, and transverse instabilities. Particular emphasis will be placed on the beam breakup instability and on the methods used to minimize it. These include a program of design changes that lead to an order of magnitude reduction in the Q's of the accelerator cavity modes and optimization of the transport tune.