A gamma-ray survey and analysis of sixteen riverbed samples from the Reedy River watershed near Simpsonville, SC were conducted and compared with national and international studies of primordial radionuclides. The study reported here follows on a recent discovery of anomalously high uranium concentrations in several private well waters in the area near Simpsonville, SC. A HPGe spectrometer was used for quantification of gamma emitting radionuclides in the sediments. All sediments contained radionuclides from the uranium and thorium series as well as {sup 40}K. Uranium-238 concentrations in sediment samples ranged from 11.1 to 74.2 Bq kg{sup -1}. The measured radionuclide concentrations were compared with data from UNSCEAR and NURE reports. The river and stream sediment data were augmented by in situ NaI(Tl) gamma-ray spectrometer measurements. Comparisons between the ex-situ and in-situ measurements indicate equivalently distributed uranium in the surface soils and stream sediments, the source of which is likely attributed to the monazite belts that are known to exist in the area.

A search for nuclear resonance fluorescence excitations in {sup 235}U and {sup 239}Pu within the energy range of 1.0- to 2.5-MeV was performed using a 4-MeV continuous bremsstrahlung source at the High Voltage Research Laboratory at the Massachusetts Institute of Technology. Measurements utilizing high purity Ge detectors at backward angles identified 9 photopeaks in {sup 235}U and 12 photopeaks in {sup 239}Pu in this energy range. These resonances provide unique signatures that allow the materials to be non-intrusively detected in a variety of environments including fuel cells, waste drums, vehicles and containers. The presence and properties of these states may prove useful in understanding the mechanisms for mixing low-lying collective dipole excitations with other states at low excitations in heavy nuclei.

The lateral order of poly(styrene-block-isoprene) copolymer(PS-b-PI) thin films is characterized by the emerging technique ofresonant soft X-ray scattering (RSOXS) at the carbon K edge and comparedto ordering in bulk samples of the same materials measured usingconventional small-angle X-ray scattering. We show resonance using theoryand experiment that the loss of scattering intensity expected with adecrease in sample volume in the case of thin films can be overcome bytuning X-rays to the pi* resonance of PS or PI. Using RSOXS, we study themicrophase ordering of cylinder- and phere-forming PS-b-PI thin films andcompare these results to position space data obtained by atomic forcemicroscopy. Our ability to examine large sample areas (~;9000 mu m2) byRSOXS enables unambiguous identification of the lateral lattice structurein the thin films. In the case of the sphere-forming copolymer thin film,where the spheres are hexagonally arranged, the average sphere-to-spherespacing is between the bulk (body-centered cubic) nearest neighbor andbulk unit cell spacings. In the case of the cylinder-forming copolymerthin film, the cylinder-to-cylinder spacing is within experimental errorof that obtained in the bulk.

We consider the production of black holes at the LHC in the Randall-Sundrum (RS) model through the collisions of Standard Model(SM) fields in the bulk. In comparison to the previously studied case where the SM fields are all confined to the TeV brane, we find substantial suppressions to the corresponding collider cross sections for all initial states, i.e., gg, qq and gq, where q represents a light quark or anti-quark which lie close to the Planck brane. For b quarks, which are closer to the TeV brane, this suppression effect is somewhat weaker though b quark contributions to the cross section are already quite small due to their relatively small parton densities. Semi-quantitatively, we find that the overall black hole cross section is reduced by roughly two orders of magnitude in comparison to the traditional TeV brane localized RS model with the exact value being sensitive to the detailed localizations of the light SM fermions in the bulk.

Description and results of a novel apparatus for determining the flow conductance through a laser drilled hole in a spherical shell for inertial confinement fusion experiments are described. The instrument monitors the pressure of an enclosed volume containing the laser pressure drilled capsule as air bleeds through the hole into the shell. From these measurements one obtains the conductance of the fill hole. This system has proven to be a valuable tool for verifying the conduct conductance into the capsule in a timely and nondestructive manner.

Laser induced damage in potassium dihydrogen phosphate (KDP) has previously been shown to depend significantly on pulse duration for 351-nm Gaussian pulses. In this work we studied the properties of damage initiated by 1053-nm temporally Gaussian pulses with 10ns and 3ns FWHM durations. Our results indicate that the number of damage sites induced by 1053-nm light scales with pulse duration ({tau}) as ({tau}{sub 1}/{tau}{sub 2}){sup 0.17} in contrast to the previously reported results for 351-nm light as ({tau}{sub 1}/{tau}{sub 2}){sup 0.35}. This indicates that damage site formation is significantly less probable at longer wavelengths for a given fluence.

Fusion energy has long been considered a promising clean, nearly inexhaustible source of energy. Power production by fusion micro-explosions of inertial confinement fusion (ICF) targets has been a long term research goal since the invention of the first laser in 1960. The NIF is poised to take the next important step in the journey by beginning experiments researching ICF ignition. Ignition on NIF will be the culmination of over thirty years of ICF research on high-powered laser systems such as the Nova laser at LLNL and the OMEGA laser at the University of Rochester as well as smaller systems around the world. NIF is a 192 beam Nd-glass laser facility at LLNL that is more than 90% complete. The first cluster of 48 beams is operational in the laser bay, the second cluster is now being commissioned, and the beam path to the target chamber is being installed. The Project will be completed in 2009 and ignition experiments will start in 2010. When completed NIF will produce up to 1.8 MJ of 0.35 {micro}m light in highly shaped pulses required for ignition. It will have beam stability and control to higher precision than any other laser fusion facility. Experiments using …

Blocks of silicon up to 3-mm thick have been formed by directly bonding stacks of thin wafer chips. These stacks showed significant reductions in the thermal conductivity in the bonding direction. In each sample, the wafer chips were obtained by polishing a commercial wafer to as thin as 36 {micro}m, followed by dicing. Stacks whose starting wafers were patterned with shallow dots showed greater reductions in thermal conductivity. Diluted-HF treatment of wafer chips prior to bonding led to the largest reduction of the effective thermal conductivity, by approximately a factor of 50. Theoretical modeling based on restricted conduction through the contacting dots and some conduction across the planar nanometer air gaps yielded fair agreement for samples fabricated without the HF treatment.

A screening and ranking framework (SRF) has been developedto evaluate potential geologic carbon dioxide (CO2) storage sites on thebasis of health, safety, and environmental (HSE) risk arising from CO2leakage. The approach is based on the assumption that CO2 leakage risk isdependent on three basic characteristics of a geologic CO2 storage site:(1) the potential for primary containment by the target formation; (2)the potential for secondary containment if the primary formation leaks;and (3) the potential for attenuation and dispersion of leaking CO2 ifthe primary formation leaks and secondary containment fails. Theframework is implemented in a spreadsheet in which users enter numericalscores representing expert opinions or published information along withestimates of uncertainty. Applications to three sites in Californiademonstrate the approach. Refinements and extensions are possible throughthe use of more detailed data or model results in place of propertyproxies.

Methods for geophysical model assessment, in particuale thecomputation of model parameter resolution, indicate the value and thelimitations of time-lapse data in estimating reservoir flow properties. Atrajectory-based method for computing sensitivities provides an effectivemeans to compute model parameter resolutions. We examine the commonsituation in which water encroaches into a resrvoir from below, as due tothe upward movement of an oil-water contact. Using straight-forwardtechniques we find that, by inclusing reflections off the top and bottomof a reservoir tens of meters thick, we can infer reservoir permeabilitybased upon time-lapse data. We find that, for the caseof water influxfrom below, using multiple time-lapse 'snapshots' does not necessarilyimprove the resolution of reservoir permeability. An application totime-lapse data from the Norne field illustrates that we can resolve thepermeability near a producing well using reflections from threeinterfaces associated with the reservoir.

Aims--We present X-ray and {sup 12}CO(J=1-0) observations of the very-high-energy (VHE) {gamma}-ray source HESS J1813-178 with the aim of understanding the origin of the {gamma}-ray emission. Methods--High-angular resolution X-ray studies of the VHE {gamma}-ray emission region are performed using 18.6 ks of XMM-Newton data, taken on HESS J1813-178 in October 2005. Using this dataset we are able to undertake spectral and morphological studies of the X-ray emission object with greater precision than previous studies. NANTEN {sup 12}CO(J=1-0) data are used to search for correlations of the {gamma}-ray emission with molecular clouds which could act as target material for {gamma}-ray production in a hadronic scenario. Results--The NANTEN {sup 12}CO(J=1-0) observations show a giant molecular cloud of mass 2.5 x 10{sup 5} M{sub {circle_dot}} at a distance of 4 kpc in the vicinity of HESS J1813-178. Even though there is no direct positional coincidence, this giant cloud might have influenced the evolution of the {gamma}-ray source and its surroundings. The X-ray data show a highly absorbed (n{sub H} {approx} 1 x 10{sup 23} cm{sup -2}) non-thermal X-ray emitting object coincident with the previously known ASCA source AXJ1813-178 showing a compact core and an extended tail towards the north-east, located in the center …

Nanophase metallic materials show a maximum in strength as grain size decreases to the nano scale, indicating a break down of the Hall-Petch relation. Grain boundary sliding, as a possible accommodation mechanisms, is often the picture that explain computer simulations results and real experiments. In a recent paper, Bringa et al. Science 309, 1838 (2005), we report on the observation of an ultra-hard behavior in nanophase Cu under shock loading, explained in terms of a reduction of grain boundary sliding under the influence of the shock pressure. In this work we perform a detailed study of the effects of hydrostatic pressure on nanophase Cu plasticity and find that it can be understood in terms of pressure dependent grain boundary sliding controlled by a Mohr-Coulomb law.

Intense ion beams are an extreme example of, and difficult to maintain as, a non-neutral plasma. Experiments and simulations are used to study the complex interactions between beam ions and (unwanted) electrons. Such ''electron clouds'' limit the performance of many accelerators. To characterize electron clouds, a number of parameters are measured including: total and local electron production and loss for each of three major sources, beam potential versus time, electron line-charge density, and gas pressure within the beam. Electron control methods include surface treatments to reduce electron and gas emission, and techniques to remove, or block, electrons from the beam. Detailed, self-consistent simulations include beam-transport fields, and electron and gas generation and consistent transport, to compute unexpectedly rich behavior, much of which is confirmed experimentally. For example, in a quadrupole magnetic field, ion and dense electron plasmas interact to produce multi-kV oscillations in the electron plasma and distortions of the beam velocity space distribution, without becoming homogenous or locally neutral.

None

Trace {sup 13}CH{sub 4} injection experiments into the main scrape-off layer of low density L-mode and high-density H-mode plasmas have been performed in the DIII-D tokamak [Luxon{_}NF02] to mimic the transport and deposition of carbon arising from a main chamber sputtering source. These experiments indicated entrainment of the injected carbon in plasma flow in the main SOL, and transport toward the inner divertor. Ex-situ surface analysis showed enhanced {sup 13}C surface concentration at the corner formed by the divertor floor and the angled target plate of the inner divertor in L-mode; in H-mode, both at the corner and along the surface bounding the private flux region inboard of the outer strike point. Interpretative modeling was made consistent with these experimental results by imposing a parallel carbon ion flow in the main SOL toward the inner target, and a radial pinch toward the separatrix. Predictive modeling carried out to better understand the underlying plasma transport processes suggests that the deuterium flow in the main SOL is related to the degree of detachment of the inner divertor leg. These simulations show that carbon ions are entrained with the deuteron flow in the main SOL via frictional coupling, but higher charge state carbon …

Magnetized Target Fusion (MTF) efforts are based on calculations showing that the addition of a closed magnetic field reduces the driver pressure and rise time requirements for inertial confinement fusion by reducing thermal conductivity. Instabilities that result in convective bulk transport at the Alphen time scale are of particular concern since they are much faster than the implosion time. Such instabilities may occur during compression due to, for example, an increase in the plasma-magnetic pressure ratio {beta} or, in the case of a rotating plasma, spin-up due to angular momentum conservation. Details depend on the magnetic field topology and compression geometry. A hard core z pinch with purely azimuthal magnetic field can theoretically be made that relaxes into a wall supported diffuse profile satisfying the Kadomtsev criterion for the stability of m = 0 modes, which is theoretically preserved during cylindrical outer wall compression. The center conductor radius and current must also be large enough to keep the {beta} below stability limits to stabilize modes with m > 0. The stability of m > 0 modes actually improves during compression. A disadvantage of this geometry, though, is plasma contact with the solid boundaries. In addition to the risk of high …

We describe an asymptotic analysis of the coupled nonlinear system of equations describing time-dependent three-dimensional monoenergetic neutron transport and isotopic depletion and radioactive decay. The classic asymptotic diffusion scaling of Larsen and Keller [1], along with a consistent small scaling of the terms describing the radioactive decay of isotopes, is applied to this coupled nonlinear system of equations in a medium of specified initial isotopic composition. The analysis demonstrates that to leading order the neutron transport equation limits to the standard time-dependent neutron diffusion equation with macroscopic cross sections whose number densities are determined by the standard system of ordinary differential equations, the so-called Bateman equations, describing the temporal evolution of the nuclide number densities.

This paper reports on a recent benchmark calculation in the four-nucleon system, aimed at investigating the reliability of the no-core shell model (NCSM) approach to the description of inclusive response functions via the Lorentz integral transform (LIT) method.

The paper presents the first attempt to estimates the ILC damping ring impedance and compare thresholds of the classical instabilities for several designs initially proposed for the DR. The work was carried out in the spring of 2006. Since then the choice of the DR is narrowed. Nevertheless, the analysis described may be useful for the next iterations of the beam stability. Overall, the conventional instabilities will have little impact on the ring performance provided the careful design of the ring minimizes the impedance below acceptable level indicated above. The only exception is the transverse CB instability. The longitudinal CB is less demanding. However, even the transverse CB instability would have threshold current above nominal provided the aperture in the wigglers is increased from 8 mm to 16 mm. The microwave instability needs more studies. Nevertheless, we should remember that the ILC DR is different from existing high-current machines at least in two respects: absence of the beam-beam tune spread stabilizing beams in colliders, and unusual strict requirements for low emittance. That may cause new problems such as bunch emittance dilution due to high-frequency wakes (BPMs, grooves), etc. Even if such a possibility exists, it probably universal for all machines …

We present new weak lensing observations of 1E0657-558 (z = 0.296), a unique cluster merger, that enable a direct detection of dark matter, independent of assumptions regarding the nature of the gravitational force law. Due to the collision of two clusters, the dissipationless stellar component and the fluid-like X-ray emitting plasma are spatially segregated. By using both wide-field ground based images and HST/ACS images of the cluster cores, we create gravitational lensing maps which show that the gravitational potential does not trace the plasma distribution, the dominant baryonic mass component, but rather approximately traces the distribution of galaxies. An 8{sigma} significance spatial offset of the center of the total mass from the center of the baryonic mass peaks cannot be explained with an alteration of the gravitational force law, and thus proves that the majority of the matter in the system is unseen.

Edge localized mode (ELM) control is a critical issue for ITER because the impulsive power loading from ELMs is predicted to limit the divertor lifetime to only a few hundred full-length pulses. Consequently, a technique that replaces the ELM-induced transport with more continuous transport while preserving the H-mode pedestal height and core performance would significantly improve the viability of ITER. One approach is to use edge resonant magnetic perturbations (RMPs) to enhance pedestal transport enough to reduce the pedestal pressure gradient {del}p{sub ped} below the stability limit for Type I ELMs. In DIII-D, n = 3 RMPs have been used to eliminate Type I ELMs when the edge safety factor is in the resonant window q95 {approx} 3.5 without degrading confinement in H-modes with ITER-relevant pedestal collisionalities v*{sub e} {approx} 0.2. The RMP reduces {del}p{sub ped} as expected, with {del}p{sub ped} controlled by the RMP amplitude. Linear peeling-ballooning (P-B) stability analysis indicates that the ELMs are suppressed by reducing {del}p{sub ped} below the P-B stability limit. The {del}p{sub ped} reduction results primarily from an increase in particle transport, not electron thermal transport. This result is inconsistent with estimates based on quasi-linear stochastic diffusion theory based on the vacuum field (no …

A cement based waste form was evaluated to determine the rates at which various organics were released during heating caused by the cementitious heat-of-hydration reaction. Saltstone is a cement-based waste form for the disposal of low-level salt solution. Samples were prepared with either Isopar{reg_sign} L, a long straight chained hydrocarbon, or (Cs,K) tetraphenylborate, a solid that, upon heating, decomposes to benzene and other aromatic compounds. The saltstone samples were heated over a range of temperatures. Periodically, sample headspaces were purged and the organic constituents were captured on carbon beds and analyzed. Isopar{reg_sign} L was released from the saltstone in a direct relationship to temperature. An equation was developed to correlate the release rate of Isopar{reg_sign} L from the saltstone to the temperature at which the samples were cured. The release of benzene was more complex and relied on both the decomposition of the tetraphenylborate as well as the transport of the manufactured benzene through the curing saltstone. Additional testing with saltstone prepared with different surface area/volume also was performed.

We report high pressure dynamic compression experiments of liquid water along a quasi-adiabatic path leading to the formation of ice VII. We observe dynamic features resembling Van der Waals loops and find that liquid water is compacted to a metastable state close to the ice density before the onset of crystallization. By analyzing the characteristic kinetic time scale involved we estimate the nucleation barrier and conclude that liquid water has been compressed to a high pressure state close to its thermodynamic stability limit.

In an effort to develop a magnetic resonance based diagnostic tool to be used for polymer production and surveillance, we have investigated the use of magnetic resonance imaging (MRI) and unilateral relaxometry. MRI provides a spatial map of the polymer, which can be correlated to the structure heterogeneity. Though highly detailed information can be obtained with MRI, the high equipment cost and expertise required to operate the system makes it a poor choice for a production setting. Unilateral relaxometry via the NMR MOUSE provides rapid, inexpensive polymer screening, useful in the development in new polymer parts or to identify potentially defective components. The NMR ProFiler (originally called the NMR MOUSE) was procured by Kansas City originally for production support of the W80 LEP with future applications as a surveillance diagnostic. A robotic autosampler has been designed allowing the detection of several components without the need for any human interaction. A summary of the qualification experiments and results to date from the ProFiler and the robotic unit will be presented.