Technical report detailing expansion of the Aircraft Nuclear Propulsion at the Oak Ridge National Laboratory. Major facilities completed at this time were the Shielding Rector, the ANP Critical Facility, and the 86-in. Cyclotron. Outlines further need for radiation damage studies. [From Summary]

Technical report outlining how uranium hexaflouride was prepared be the direct combination of irradiated uranium metal with elemental fluorine and subsequently decontaminated by adsorption, filtration, and sublimation on a laboratory scale. Report proposes a survey of other methods of preparing UF6 from uranium metal, a study of adsorption techniques for removing plutonium from UF6, and an investigation of fractional distillation for removing the volatile fission product fluorides from UF6. [From Abstract, Summary]

A series of neutron multiplication measurements with arrays of 1 by 8 by 10 in. slabs of 93.4% U235-enirched uranium metal have been made to provide data from which safety criteria for the storage of these fissile units can be established. Each slab contained 22.9 kg of U235. A maximum of 125 unites was assembled. The arrays studied were cubic lattices of the units and were usually parallelepipedal in shape.

The development of ionic methods for the determination of corrosive products in the highly radioactive Homogeneous Reactor (HR) fuels has been of major interest in the work of the Ionic Analyses Laboratory. Methods for the spectrophotometric determination of aluminum and for the polarographic determination of iron in HR fuels have been developed. The polarographic determination of molybdenum in uranyl sulfate solutions was studied. A polarographic method for the determination of zinc was developed. A fluorometric method for the determination of microgram amounts of fluoride was studied. Three organic reagents were investigated as precipitants for microgram quantities of zirconium in HR fuel. The automatic photometric titration technique was applied to the determination of thorium and of sulfate. A method was developed for the ion-exchange separation and potentiometric titration of cobalt. The ultraviolet absorption spectra of technetium and rhenium were studied.

Technical report detailing corrosion tests of Type 347 stainless steel for two weeks in boiling uranyl nitrate, sulfuric acid media, with and without additions of Al+3 and F-1 in a 2:1 mole ratio. The results of these tests show that although the presence of aluminum greatly reduces the deleterious effect of fluoride, the corrosion rates are still three to four times greater than when no fluoride is present. [From Abstract]

Air filter and rainwater collections of atmospheric fall-out were made at Atlanta, Georgia; Urbana, Illinois; Topeka, Kansas; Fort Worth, Texas; and Nashville, Tennessee. Collections reflect the effects of the radioactive cloud from the Nevada tests.

Report containing ongoing projects and experiments undertaken by the Oak Ridge National Laboratory's Molten-Salt Reactor Program.

Report issued by the Oak Ridge National Laboratory discussing radiation corrosion studies. As stated in the introduction, "the purpose of this experiment was to compare the performance of a large number of materials under similar irradiation and exposure conditions" (p. 1). This report includes tables, illustrations, and photographs.

Report documenting the process of decontaminating low-activity fuel waste water via the Scavenging-Precipitation Ion-Exchange process. This includes analyses of the costs of the process as well as a description of the operation of the pilot plant.

Calculated data and graphs describing the effects of batch thermal-neutron irradiation of thorium, the usual method of operation of heterogeneous reactors, are presented. The buildup and decay of U233, Pa233, other heavy isotopes, and fission products are considered on the basis of best available cross-section and fission-yield data. The effects of these irradiation products on the Thorex chemical separation process are indicated briefly.

Measurements of the interfacial tension between water and tributyl phosphate solutions were made for application to the analysis of Marengoni effect in solvent extraction. A 24 hr flame calcination run to product Th02 particles yielded 40% as product and 54% collected from the furnace walls and from a coarse particle trap. The elution rates of uranyl ion from Dowex 21K using sodium nitrate could be approximated by assuming apparent diffusion coefficients of 1.67 x 10^-7 and 1.18 x 10 ^-7 cm^2/sec, respectively for 960µ and 820µ resn while the corresponding apparent coefficients using sodium chloride were 1. 78 x 10^-7 and 1.27 x 1-^-7 cm^2/sec. The reacting surface of ThO2 Universal Match Co. pellets was determined as a function of fraction dissolved. The lead scews and companion nuts from both the multipurpose saw and dejacketing machine were coated with a baked on lubricant. In Zirflex decladding studies using 4.5 M NH4F - 0.5 M NH4NO3, the average dissolution rate of Zircaloy-2 was decreased only 10% when the overhead condensate was withdrawn and 1.0 M NH4OH was added to maintain the volume.

Five irradiated and five unirradiated wafers were analyzed. Each wafer was analyzed for samarium by emission spectrography. The unirradiated wafers were analyzed for uranium by coulometric and potentiometric methods and for uranium isotopes by mass spectrometry. The irradiated wafers were analyzed for uranium and plutonium by coulometric methods, for plutonium isotopes by the 256-channel alpha pulse analyzer, and for the isotopes of uranium and of plutonium by mass spectrometry. The methods of preparing wafers for analysis are discussed; the data are tabulated.

The feasibility of improving the mechanical properties at 1700-1800°F of oxidation-resistant Fe-Al-Cr alloys by means of a refractory dispersion has been explored. A literature search was conducted, preliminary experimental determinations of properties of the alloy and its oxides were carried out, and certain mathematical relations between dispersion characteristics and metallurgical variables were derived. The results indicate that the alloys can be strengthened sufficiently by using a dispersion with an interparticle spacing of about 2-3 µ. High-temperature native oxides of the Fe-Al-Cr alloy consist largely of Al2O3 and in theory would serve as a satisfactory second phase.