The purpose of this calculation is to estimate radiation doses received by personnel working in the Canister Handling Facility (CHF) performing operations to receive transportation casks, transfer wastes, prepare waste packages, perform associated equipment maintenance. The specific scope of work contained in this calculation covers individual worker group doses on an annual basis, and includes the contributions due to external and internal radiation. The results of this calculation will be used to support the design of the CHF and provide occupational dose estimates for the License Application.

The John Day is the nation's second longest free-flowing river in the contiguous United States and the longest containing entirely unsupplemented runs of anadromous fish. Located in eastern Oregon, the basin drains over 8,000 square miles, Oregon's fourth largest drainage basin, and incorporates portions of eleven counties. Originating in the Strawberry Mountains near Prairie City, the John Day River flows 284 miles in a northwesterly direction, entering the Columbia River approximately four miles upstream of the John Day dam. With wild runs of spring Chinook salmon and summer steelhead, westslope cutthroat, and redband and bull trout, the John Day system is truly a basin with national significance. The majority of the John Day basin was ceded to the Federal government in 1855 by the Confederated Tribes of the Warm Springs Reservation of Oregon (Tribes). In 1997, the Tribes established an office in the basin to coordinate restoration projects, monitoring, planning and other watershed activities on private and public lands. Once established, the John Day Basin Office (JDBO) formed a partnership with the Grant Soil and Water Conservation District (GSWCD), which contracts the majority of the construction implementation activities for these projects from the JDBO. The GSWCD completes the landowner contact, …

Numerous applications of data mining to scientific data involve the induction of a classification model. In many cases, the collection of data is not performed with this task in mind, and therefore, the data might contain irrelevant or redundant features that affect negatively the accuracy of the induction algorithms. The size and dimensionality of typical scientific data make it difficult to use any available domain information to identify features that discriminate between the classes of interest. Similarly, exploratory data analysis techniques have limitations on the amount and dimensionality of the data that can be effectively processed. In this paper, we describe applications of efficient feature selection methods to data sets from astronomy, plasma physics, and remote sensing. We use variations of recently proposed filter methods as well as traditional wrapper approaches where practical. We discuss the importance of these applications, the general challenges of feature selection in scientific datasets, the strategies for success that were common among our diverse applications, and the lessons learned in solving these problems.

Ferrite rods are installed inside the flying-wire cavity of the Recycler Ring and at entrance and exit beam pipes in order to absorb high-frequency electromagnetic waves excited by the beam. However, these rods may also deteriorate the vacuum pressure of the ring. An investigation is made to analyze the necessity of the ferrite rods at the entrance and exit beam pipes.

Significant effort is being devoted to the development of noninvasive imaging systems that allow in vivo assessment of biological and biomolecular interactions in mice and other small animals. Although single-photon emission tomography (SPECT) and positron emission tomography (PET) are well-matched to the study of physiological function in small animals, the spatial resolutions of 1-2 mm currently achievable with these techniques limits the types of research possible. For this reason, we are developing a small animal radionuclide imaging system using grazing incidence optics to focus the low-energy gamma-rays emitted by {sup 125}I, {sup 95m}Tc, {sup 96}Tc, and {sup 99m}Tc. We compare this approach to the more traditional use of absorptive collimation.

In this reporting period, full disc prototype manufacturing tests continued. The disc size and HIP can problems were corrected. Unfortunately, cracking still occurred on insert interface, possibly due to oxidation film on the particle boundaries. This indicates improper off-gassing.

Consolidated Appropriations Resolution, 2003 Conference Report for the Department of Energy's Biological and Environmental Research (BER) program provided $481,000 for the Legume Genome Initiative at the University of Oklahoma. These funds were used to support our research that is aimed at determining the entire sequence of the gene rich regions of the genome of the legume, Medicago truncatula, by allowing us to obtain a greater degree of finished BAC sequences from the draft sequences we have already obtained through research funded by the Noble Foundation. During the funding period we increased the number of Medicago truncatula BACs with finished (Bermuda standard) sequences from 109 to 359, and the total number of BACs for which we collected sequence data from 584 to 842, 359 of which reached phase 2 (ordered and oriented contigs). We also sequenced a series of pooled BAC clones that cover additional euchromatic (gene rich) genomic regions. This work resulted in 6 refereed publications, see below. Genes whose sequence was determined during this study included multiple members of the plant disease resistance (R-gene) family as well as several genes involved in flavinoid biosynthesis, nitrogen fixation and plant-microbial symbosis. This work also served as a prelude to obtaining NSF …

This paper provides a summary of some major physics issues and future perspectives discussed in the Mini-Conference on Laboratory Plasma Astrophysics. This Mini-conference, sponsored by the Topical Group on Plasma Astrophysics, was held as part of the American Physical Society's Division of Plasma Physics 2003 Annual Meeting (October 27-31, 2003). Also included are brief summaries of selected talks on the same topic presented at two invited paper sessions (including a tutorial) and two contributed focus oral sessions, which were organized in coordination with the Mini-Conference by the same organizers.

The following report covers work performed at Ohio State on modeling the mechanical performance of dies. The focus of the project was development and particularly verification of finite element techniques used to model and predict displacements and stresses in die casting dies. The work entails a major case study performed with and industrial partner on a production die and laboratory experiments performed at Ohio State.

Five cycles of loading, elution, and regeneration were performed to remove technetium from a Hanford waste sample retrieved from Tank 241-AW-101 using SuperLig 639 resin. The waste sample was diluted to 4.95 M Na plus and then was processed to remove 137Cs through dual ion exchange columns each containing 15 mL of SuperLig 644. To remove 99Tc, the cesium decontaminated solution was processed downwards through two ion exchange columns, each containing 12 mL of SuperLig 639 resin. The columns, designated as lead and lag, each had an inside diameter of 1.45 cm and a height of 30 cm. The columns were loaded in series, but were eluted and then regenerated separately. The average technetium loading for the cycles was 250 BV at 10 percent breakthrough. There was no significant difference in the loading performances among the five cycles. The percent removal of 99Tc was greater than 99.94 percent and the average decontamination factor (DF) was approximately 1.7 x 103. Approximately 99 percent of the 99Tc loaded on the resin was eluted with less than 15 BV of de-ionized water at 65 degrees C.

The program for International Collaboration on CO{sub 2} Ocean Sequestration was initiated December 1997. Preliminary steps involved surveying a suite of biogeochemical parameters off the coast of Kona on the Big Island of Hawaii. The preliminary survey was conducted twice, in 1999 and 2000, to obtain a thorough data set including measurements of pH, current profiles, CO{sub 2} concentrations, microbial activities, and water and sediment chemistries. These data were collected in order to interpret a planned CO{sub 2} injection experiment. After these preliminary surveys were completed, local environment regulation forced moving the project to the coast north east of Bergen, Norway. The preliminary survey along the Norwegian Coast was conducted during 2002. However, Norwegian government revoked a permit, approved by the Norwegian State Pollution Control Authority, for policy reasons regarding the CO{sub 2} injection experiment. As a result the research team decided to monitor the natural CO{sub 2} flow off the southern coast of the Big Island. From December 3rd-13th 2002 scientists from four countries representing the Technical Committee of the International Carbon Dioxide Sequestration Experiment examined the hydrothermal venting at Loihi Seamount (Hawaiian Islands, USA). Work focused on tracing the venting gases, the impacts of the vent fluids on …

The authors report the observation of a narrow state decaying into J/{psi}{pi}{sup +}{pi}{sup -} and produced in 220 pb{sup -1} of {bar p}p collisions at {radical}s = 1.96 TeV in the CDF II experiment. They observe 730 {+-} 90 decays. The mass is measured to be 3871.3 {+-} 0.7(stat) {+-} 0.4(syst) MeV/c{sup 2}, with an observed width consistent with the detector resolution. This is in agreement with the recent observation by the Belle Collaboration of the X(3872) meson.

The two-particle model, first introduced by Hasse, is employed to predict the beam temperature at which a one-dimensional ordered state of ions will be established in a cooler storage ring. The proposed state does not have the ions (in the beam frame) at rest, but simply has them not passing each other; i.e., remaining in the same (ordered) sequence. The model is applicable to an ultra-low density beam where collective Coulomb interactions are negligible. It is pointed out that the nature of the anomalous beam behavior observed in electron-cooling experiments at GSI (Darmstadt) and MSL (Stockholm) is approximately free from such parameters as the lattice design, ion species, beam density and energy. On the basis of the model, which is put in Hamiltonian form, scaled, and numerically studied, a universal criterion of one-dimensional beam ordering at low line density is derived. Analytic work is employed to explain the numerical results and derives an approximate criterion.

The purpose of this design calculation is to estimate radiation doses received by personnel in the Remediation Facility performing operations to receive, prepare, open, repair, recover, disposition, and correct off-normal and non-standard conditions with casks, canisters, spent nuclear fuel (SNF) assemblies, and waste packages (WP). The specific scope of work contained in this calculation covers both collective doses and individual worker group doses on an annual basis, and includes the contributions due to external and internal radiation. The results of this calculation will be used to support the design of the Remediation Facility and provide occupational dose estimates for the License Application.

To minimize movement of tritium into surface waters at the Mixed Waste Management Facility at the Savannah River Site, tritium contaminated seepage water is being retained in a constructed pond and used to irrigate forest acreage that lies above the pond and over the contaminated groundwater. Twenty five-year potential evapotranspiration and average precipitation are 1443 mm/year and 1127 mm/year, respectively, for the region in which the site is located. Management of the application of tritium contaminated irrigation water needs to be evaluated in the context of the large amount of rainfall relative to evapotranspiration, the strong seasonality in evapotranspiration, and intraannual and inter-annual variability in precipitation. A dynamic simulation model of water and tritium fluxes in the soil-plant-atmosphere continuum was developed to assess the efficiency (tritium transpired/tritium applied) of several irrigation management strategies.

This paper provides a brief survey of document structural similarity algorithms, including the optimal Tree Edit Distance algorithm and various approximation algorithms. The approximation algorithms include the simple weighted tag similarity algorithm, Fourier transforms of the structure, and a new application of the shingle technique to structural similarity. We show three surprising results. First, the Fourier transform technique proves to be the least accurate of any of approximation algorithms, while also being slowest. Second, optimal Tree Edit Distance algorithms may not be the best technique for clustering pages from different sites. Third, the simplest approximation to structure may be the most effective and efficient mechanism for many applications.

We report on spectroscopic investigations of Nd{sup 3+}- and Tb{sup 3+}- doped low phonon energy, moisture-resistant host crystals, KPb{sub 2}Br{sub 5} and RbPb{sub 2}Br{sub 5}, and their potential to serve as new solid state laser materials at new wavelengths, especially in the long wavelength infrared region. This includes emission spectra, emission lifetime measurements, Raman scattering spectra as well as calculations of the multiphonon decay rate, radiative lifetimes and quantum efficiencies for relevant (laser) transitions in these crystals.

Significant effort currently is being devoted to the development of noninvasive imaging systems that allow in vivo assessment of biological and biomolecular interactions in mice and other small animals. While physiological function in small animals can be localized and imaged using conventional radionuclide imaging techniques such as single-photon emission tomography (SPECT) and positron emission tomography (PET), these techniques inherently are limited to spatial resolutions of 1-2 mm. For this reason, we are developing a small animal radionuclide imaging system (SARIS) using grazing incidence optics to focus gamma-rays emitted by {sup 125}I and other radiopharmaceuticals. We have developed a prototype optic with sufficient accuracy and precision to focus the 27.5 keV photons from {sup 125}I onto a high-resolution imaging detector. Experimental measurements from the prototype have demonstrated that the optic can focus X-rays from a microfocus X-ray tube to a spot having physical dimensions (approximately 1500 microns half-power diameter) consistent with those predicted by theory. Our theoretical and numerical analysis also indicate that an optic can be designed and build that ultimately can achieve 100 {micro}m spatial resolution with sufficient efficiency to perform in vivo single photon emission imaging studies in small animal.

The purpose of this design calculation is to estimate radiation doses received by personnel working in the subsurface facility of the repository performing emplacement, maintenance, and retrieval operations under normal conditions. The results of this calculation will be used to support the design of the subsurface facilities and provide occupational dose estimates for the License Application.

By September 14, three days after the initial World Trade Center collapse, efforts at fire suppression and heavy rainfall had extinguished the immediate surface fires. From then until roughly mid-December, the collapse piles continuously emitted an acrid smoke and fume in the smoldering phase of the event. Knowledge of the sources, nature, and concentration of these aerosols is important for evaluation and alleviation of the health effects on workers and nearby residents. In this paper, we build on our earlier work to ascribe these aerosols to similar processes that occur in urban incinerators. The simultaneous presence of finely powdered (circa 5 {micro}m) and highly basic (pH 11 to 12) cement dust and high levels of very fine (< 0.25 {micro}m) sulfuric acid fumes helps explain observed health impacts. The unprecedented levels of several metals in the very fine mode can be tied to liberation of those metals that are both present in elevated concentrations in the debris and have depressed volatility temperatures caused by the presence of organic materials and chlorine.