From abstract: "The stability constants of curium and americium alpha hydroxyisobutyrate complexes were determined by means of ion exchange equilibrium measurements on Dowex-50 four percent resin in the ammonium form."

This report discusses methods of high energy plasma. It elaborates on these methods and their use of high energy particles.

Memorandum presenting force and moment characteristics of configurations employing wings of very low aspect ratio as determined for Mach numbers of 1.97 and 3.33. The angle of attack range was from 0 to 17 degrees for Mach number 1.97 and from 0 to 30 degrees for Mach number 3.33. Results regarding experimental force and moment characteristics, comparisons of theoretical and experimental force and moment characteristics, and visual observations of flow over models are provided.

Report presenting a theoretical study of the possibility of improving the lifting efficiency of aircraft flying at supersonic speeds using indirect lift, which can be induced on the wing by the fuselage shape and/or wing end plates. Results indicated that lifting efficiency of a planar wing may be improved by favorable interference induced by lateral forces on the end plates or on the sides of the fuselage.

"An experimental investigation has been made in the Langley stability tunnel to determine the aerodynamic characteristics of the Army Chemical Corps model E-112 bomblets with span-chord ratio of 2:1. A detailed analysis has not been made; however, the results showed that all the models were spirally unstable and that a large gap between the model tips and end plates tended to reduce the instability" (p. 1).

Report presenting an investigation of the aerodynamic characteristics of various configurations of the Republic F-105 in the transonic tunnel at Mach numbers from 0.60 to 1.13. Results in this report include the static longitudinal stability and control characteristics, the effect of various configuration modifications on lift-drag ratio, the effect of subsonic and supersonic inlets and external stores, and the effect of area-distribution modifications on performance.

Memorandum presenting an investigation to determine the low-speed aerodynamic characteristics of a 35 degree swept-wing fighter airplane with a segmented spoiler-slot deflector lateral control system installed ahead of the conventional ailerons and operated as individual units and as combined segments. The longitudinal characteristics of the airplane and spoiler-slot-deflector effectiveness data were obtained through the complete angle-of-attack range with the ailerons neutral and with the ailerons drooped in conjunction with the normal flaps. Results regarding longitudinal characteristics, spoiler-deflector characteristics, and hinge-moment characteristics are provided.

Report presenting an investigation of the release characteristics of several dynamically scaled store shapes from a simulated bomb bay at Mach numbers of 1.39, 1.60, and 1.98. A streamline store, a blunt-nose store with wedge-type fins of low aspect ratio, and a bluff store with a skirt were tested. Results regarding pitching motions, ejection velocity, effect of increase in altitude, and addition of plate or spike to the nose of the store are provided.

Memorandum presenting an investigation at Mach numbers of 1.61 and 2.01 to examine the characteristics of a series of nine spoiler-type controls on a trapezoidal wing with the leading edge swept back 23 degrees, an aspect ratio of 3.1, and a taper ratio of 0.4. Results regarding pressure distributions, spanwise loadings, and integrated coefficients are provided.

Report presenting an investigation in the 8- by 6-foot supersonic tunnel to determine the external-stream effects on the gross thrust and pumping characteristics of ejectors operating at off-design Mach numbers. Results regarding the pumping, thrust, and base characteristics, boattail drag characteristics, and stream effects on jet thrust for typical ejector installations are provided.

Memorandum presenting an application of the supersonic area rule concept to the deign of a straight-wing-body combination with large symmetrically mounted nacelles located at the 70-percent-semispan station. The pressure drag from the configuration with nacelles was found to be significantly less than that from a corresponding configuration without nacelles throughout the Mach number range.

Discussing velocity logging carried out during six weeks of fieldwork in 1955 through contracts with the Texas Company.

Recent developments in the field of photoconductive devices made possible the simplification and attendant improvement of the recording anemometer system used with the portable meteorological mast. The purpose of the work was to produce a simple, reliable recording anemometer system compatible with the project's existing instrumentation. Of primary importance was reduction of maintenance without loss of accuracy. This report discusses some of the factors considered in the design of the system, describes in detail the electronic circuitry and mechanical components, and presents some performance data. The data obtained from a twenty-four hour trial run indicates that the system has fulfilled the requirements.

The so-called Fluoride Volatility Processes refer to several proposed non-aqueous methods of processing irradiated fuel elements. In each of these methods, the uranium is fluorinated to uranium hexafluoride and then decontaminated by distillation. One of the methods, involving direct fluorination of the uranium by bromine trifluoride, has been under investigation at BNL since 1950; subsequently a pilot plant was built to study this step of the process. The objectives of the program were to investigate the technical feasibility of continuous dissolution, and to determine the effect of process variables on the capacity of the equipment; namely the effect of temperature, solution composition, flow rate, and uranium history on dissolving time as related to fuel elements of the types used at BNL, ORNL, and Hanford. The nominal capacity of the dissolver was five pounds of uranium per hour and all process equipment was fabricated of Monel. Special equipment components and numerous safety features were utilized. The major equipment development was a canned-rotor pump used for circulation of the dissolver stream through the heat exchanger. A system for continually charging slugs to the pressurized dissolver was also developed. Operation consisted of batch runs which were made with unirradiated BNL slugs in order …

Report presenting an investigation to determine the low-speed aerodynamic characteristics of a 35 degree swept-wing fighter airplane with a segmented spoiler-slot-deflector lateral control system installed ahead of conventional ailerons and operated as both individual units and combined segments. Results regarding longitudinal characteristics, spoiler-deflector characteristics, and hinge-moment characteristics are provided.

Memorandum presenting the optical transmission characteristics of turbulent boundary layers in air on a flat plate with negligible heat transfer measured photometrically for ranges of Mach number from 0.4 to 2.5. The results indicated that the scattering from a collimated beam of white light which penetrates a turbulent boundary layer depends mainly on the integral across the layer of the difference between the free-stream density and the local boundary-layer density.

Results presenting an investigation in the supersonic pressure tunnel to determine the static stability and control characteristics of a ram-jet canard missile at Mach number 2.01. The missile had wings, canard surfaces of delta plan form with 70 degree swept leading edges, and two ram-jet nacelles. Results regarding the longitudinal and lateral characteristics are provided.

Report presenting the use of a hot-wire anemometer to study the tip-region flow phenomena at the exit of a single-stage transonic compressor rotor. The flow phenomena were recorded as a film which is available as a supplement to the report. Results regarding overall results of hot-wire measurements, quantitative results from hot-wire measurements, and some concluding remarks are provided.

From Introduction: "The results of tests in which area suction was applied near the leading edge of the wing or the knee of a leading-edge flap are reported in references 1 through 5."

Report presenting a full-scale wind-tunnel investigation to determine whether the effects of blowing high-velocity air over trailing-edge flaps could be adequately correlated by jet momentum over a range of jet velocities. Good correlation of lift with jet momentum was obtained over the range of jet pressure ratios.

Report presenting an examination of the limitations of the use of jet momentum coefficient as a correlating factor in comparing tests of blowing-type boundary-layer control. Theoretical and experimental data indicate that it should be an acceptable parameter where the duct pressures are large.

"A study of the high-temperature oxidation of several aircraft construction materials was undertaken to assess the possibility of ignition under high-temperature flight conditions.Tests have been made both in open and closed jets, and, in addition, the burning of metals has been observed under static conditions in a pressurized vessel containing either air, oxygen, or nitrogen. When heated in an atmosphere of oxygen or when heated and plunged into a supersonic airstream, titanium, iron, carbon steel, and common alloys such as 4130 were found to have spontaneous-ignition temperatures in the solid phase (below melting) and they melted rapidly while burning" (p. 1).

Report presenting an investigation to determine the aerodynamic characteristics of a spoiler-slot-deflector configuration in combination with a trailing-edge 29-percent-chord high-lift flap. The wing has a sweepback of 45 degrees at the quarter-chord line, an aspect ratio of 4, a taper ratio of 0.6, and an NACA 65A006 airfoil. Results are also presented regarding the effect of deflector projection on the aerodynamic characteristics of a spoiler-slot-deflector on the plain wing.

Report presenting an investigation of the intensity of root-mean-square pressure pulsations and root-mean-square normal-force-coefficient fluctuations conducted on two high-lift airfoils and two 6-series airfoils. Results regarding the factors affecting comparison of data from various test facilities, root-mean-square pressure pulsations, and root-mean-square force fluctuations are provided.