A high-frequency, high-resolution electromagnetic (EM) imaging system has been developed for environmental geophysics surveys. Some key features of this system include: (1) rapid surveying to allow dense spatial sampling over a large area, (2) high-accuracy measurements which are used to produce a high-resolution image of the subsurface, (3) measurements which have excellent signal-to-noise ratio over a wide bandwidth (31 kHz to 32 MHz), (4) elimination of electric-field interference at high frequencies, (5) large-scale physical modeling to produce accurate theoretical responses over targets of interest in environmental geophysics surveys, (6) rapid neural network interpretation at the field site, and (7) visualization of complex structures during the survey. Four major experiments were conducted with the system: (1) Data were collected for several targets in our physical modeling facility. (2) The authors tested the system over targets buried in soil. (3) The authors conducted an extensive survey at the Idaho National Engineering Laboratory (INEL) Cold Test Pit (CTP). The location of the buried waste, category of waste, and thickness of the clay cap were successfully mapped. (4) The authors ran surveys over the acid pit at INEL. This was an operational survey over a hot site. The interpreted low-resistivity region correlated closely with …

This report covers the first of the two years covered in the DOE grant to investigate structural and geobotanical features of hydrocarbon reservoirs in western West Virginia. The reader is referred to the three previous Quarterly reports for greater detail on tasks originally described in those reports. The progress of the project will be discussed with reference to the tasks identified for the project.

This paper describes a numerical method for the solution of plasma fluid equations on block-structured, locally refined grids. The plasma under consideration is typical of those used for the processing of semiconductors. The governing equations consist of a drift-diffusion model of the electrons and an isothermal model of the ions coupled by Poisson's equation. A discretization of the equations is given for a uniform spatial grid, and a time-split integration scheme is developed. The algorithm is then extended to accommodate locally refined grids. This extension involves the advancement of the discrete system on a hierarchy of levels, each of which represents a degree of refinement, together with synchronization steps to ensure consistency across levels. A brief discussion of a software implementation is followed by a presentation of numerical results.

This project involves the development of an optimized, bench-scale processing circuit capable of efficiently removing trace elements from run-of-mine coals. The optimized circuit will be developed using characterization data obtained from detailed washability suicides and release analyses tests conducted with several eastern U.S. coals. The optimized circuit will incorporate a variety of conventional and advanced coal cleaning processes which are believed to be the most cost-effective and commercially viable. The coal products from the optimized circuit will be further treated with complexing agents specifically designed to extract organometallic trace elements that are difficult to remove by physical cleaning operations. Finally, innovative bioremediation schemes will be investigated as a means of controlling the release of trace elements from the process waste streams. Emphasis has been placed on the development of a processing circuit which (i) maximizes the rejection of trace elements, (ii) minimizes the production of coal fines which are costly to process and less marketable, and (iii) minimizes the downstream impacts of the process waste streams on the environment.

The acrylic vessel as constructed is dirty. The dirt includes blue tape, Al tape, grease pencil, gemak, the glue or residue form these tapes, finger prints and dust of an unknown composition but probably mostly acrylic dust. This dirt has to be removed and once removed, the vessel has to be kept clean or at least to be easily cleanable at some future stage when access becomes much more difficult. The authors report on the results of a series of tests designed: (a) to prepare typical dirty samples of acrylic; (b) to remove dirt stuck to the acrylic surface; and (c) to measure the optical quality and Th concentration after cleaning. Specifications of the vessel call for very low levels of Th which could come from tape residues, the grease pencil, or other sources of dirt. This report does not address the concerns of how to keep the vessel clean after an initial cleaning and during the removal of the scaffolding. Alconox is recommended as the cleaner of choice. This acrylic vessel will be used in the Sudbury Neutrino Observatory.

Task 4 experimental testing was continued. Six first-stage one-liter autoclave tests were made at reduced severity conditions. A device to reduce the in-line filter diameter proved difficult to use and resulted in little usable filtration data. Its use was discontinued. The second-stage reactor system was overhauled and used to process Wilsonville Run 263J resid. Resid conversion and yields were commensurate with expected results. The economic and engineering evaluation of the Novel Concept process, based on Task 2 and Task 3 experimental data, was begun. The design of a conceptual commercial plant was completed. The economic and engineering evaluation illuminated components of the process operating and capital cost estimates which, if appropriately altered, could significantly reduce the cost of product (gasoline) from the process. This provided direction for the Task 4 experimental program.

The Forest Service in the Department of Agriculture and the Bureau of Land Management in the Department of the Interior each currently have a system of administrative appeals for moat agency land management decisions. Critics assert that administrative and judicial appeals are stopping or unacceptably slowing the decision-making processes and the use of federal lands and resources; that many appeals are "frivolous" and brought for the purpose of frustrating rather than improving land management actions, and that appeals greatly increase the costs of management

This Functional Design Criteria is designed to summarize and give guidance during the development of design, manufacturing and testing specification documents. As the overview document bounding parameters are specified with detailed acceptance criteria to be developed in the more detailed and separate design, manufacturing and testing specification documents.

None

This Supporting Document provides historical in-depth characterization information on U-Tank Farm, such as historical waste transfer and level data, tank physical information, temperature plots, liquid observation well plots, chemical analyte and radionuclide inventories for the Historical Tank Content Estimate Report for the Southwest Quadrant of the Hanford 200 West Area.

The SDD documents the Structures, Systems, and Components that establish the facility Safety Envelope for the Cementation of SS&C.

The Surface Mining Control and Reclamation Act (SMCRA, P.L. 95-87), enacted in 1977, established reclamation standards for all coal surface mining operations, and for the surface effects of underground mining. It also established the Abandoned Mine Land (AML) program to promote the reclamation of sites mined and abandoned prior to the enactment of SMCRA. To finance reclamation of abandoned mine sites, the legislation established fees on coal production. These collections are divided into federal and state shares; subject to annual appropriation, AML funds are distributed annually to states with approved reclamation programs. This report describes the distribution of these funds and the various issues that arise from said distribution.

The APT program has been examining both normal and superconducting variants of the APT linac for the past two years. A decision on which of the two will be the selected technology will depend upon several considerations including the results of ongoing feasibility experiments, the performance and overall attractiveness of each of the design concepts, and an assessment of the system-level features of both alternatives. The primary objective of the Assessment of Alternative RF Linac Structures for APT study reported herein was to assess and compare, at the system-level, the performance, capital and life cycle costs, reliability/availability/maintainability (RAM) and manufacturing schedules of APT RF linear accelerators based upon both superconducting and normal conducting technologies. A secondary objective was to perform trade studies to explore opportunities for system optimization, technology substitution and alternative growth pathways and to identify sensitivities to design uncertainties.

The Fischer-Tropsch (F-T) reaction provides a way of converting coal-derived synthesis gas (CO+H{sub 2}) to liquid fuels. Since the reaction is highly exothermic, one of the major problems in control of the reaction is heat removal. Recent work has shown that the use of slurry bubble column reactors (SBCRS) can largely solve this problem. Iron-based (Fe) catalysts are preferred catalysts for F-T when using low CO/H{sub 2} ratio synthesis gases derived from modem coal gasifiers. This is because in addition to reasonable F-T activity, the FT catalysts also possess high water gas shift (WGS) activity. However, a serious problem with the use of Fe catalysts in a SBCR is their tendency to undergo attrition. This can cause fouling/plugging of downstream filters and equipment, making the separation of catalyst from the oil/wax product very difficult if not impossible, and results in a steady loss of catalyst from the reactor. The objectives of this research are to develop a better understanding of the parameters affecting attrition resistance of Fe F-T catalysts suitable for use in SBCRs and to incorporate this understanding into the design of novel Fe catalysts having superior attrition resistance. Catalyst preparations will be based on the use of spray …

This report describes a computational model of a copper laser amplifier. The model contains rate equations for copper and the buffer gas species (neon and hydrogen), along with equations for the electron temperature, the laser intensity, and the diffusing magnetic field of the discharge. Rates are given for all pertinent atomic reactions. The radial profile of the gas temperature is determined by the time-averaged power deposited in the gas. The presence of septum inserts, which aid gas cooling, is taken into account. Fields are calculated consistently throughout the plasma and the surrounding insulation. Employed in conjunction with a modulator model, the model is used to calculate comprehensive performance predictions for a high- power operational amplifier.

The North Disposal Trench, located north of the eastern most lagoon, was installed in 1963 to receive solid waste and construction debris from the Operation Roller Coaster man camp. Subsequent to Operation Roller Coaster, the trench continued to receive construction debris and range cleanup debris (including ordnance) from Sandia National Laboratories and other operators. A small hydrocarbon spill occurred during Voluntary Corrective Action (VCA) activities (VCA Spill Area) at an area associated with the North Disposal Trench Corrective Action Site (CAS). Remediation activities at this site were conducted in 1995. A corrective action investigation was conducted in September of 1996 following the Corrective Action Investigation Plan (CAIP); the detailed results of that investigation are presented in Appendix A. The Roller Coaster Lagoons and North Disposal Trench are located at the Tonopah Test Range (TTR), a part of the Nellis Air Force Range, which is approximately 225 kilometers (140 miles) northwest of Las Vegas, Nevada, by air.

This report describes new technologies being developed to help detect and clear anti-personel landmines, the programs that are developing them, and discusses related issues for congressional consideration.

This engineering report will discuss the ventilation tasks necessary for minimizing the current K3 ventilation systems volumetric airflows while continuing to maintain negative pressures in both the canyon area and the related hot cells, assuring radiological confinement and containment of WESF.

Boron carbide (B{sub 4}C) is examined as a potential fuel container and ablator for implosion capsules on the National Ignition Facility (NIF). A capsule of pure B{sub 4}C encasing a layer of solid DT implodes stably and ignites with anticipated NIF x-ray drives, producing 18 MJ of energy. Thin films of B{sub 4}C were found to be resistant to oxidation and modestly transmitting in the infrared (IR), possibly enabling IR fuel characterization and enhancement for thin permeation barriers but not for full-thickness capsules. Polystyrene mandrels 0.5 mm in diameter were successfully coated with 0.15-2.0 micrometers of B{sub 4}C. Thickness estimated from optical density agreed well with those measured by scanning electron microscopy (SEM). The B{sub 4}C microstructure was columnar but finer than for Be made at the same conditions. B{sub 4}C is a very strong material, with a fiber tensile strength capable of holding NIF fill pressures at room temperature, but it is also very brittle, and microscopic flaws or grain structure may limit the noncryogenic fill pressure. Argon (Ar) permeation rates were measured for a few capsules that had been further coated with 5 micrometers of plasma polymer. The B{sub 4}C coatings tended to crack under tensile load. Some …

The main thrust of this collaborative effort can be summarized as an attempt to use the strengths of physical experiments and numerical simulations in understanding the dynamics of accelerated interfaces. Laboratory experiments represent the true nature of the physical processes and the simulations represent a model of these processes. We have taken the first steps toward this goal through development and calibration of new experimental techniques as well as validation and direct, systematic, and quantitative comparison with computational results. This report summarizes accomplishments made towards these goals. More detailed information is provided in reprints appended to this document.

The purpose of this interim report is to verify that the structural performance of the current Multiple Canister Overpack (MCO) cask design meets the structural performance requirements.

The degree and nature of polymer degradation that occurs in the high temperature microshell formation process developed at the Lebedev Physical Institute has been examined experimentally. We find that significant mass degradation occurs during the final stages of shell formation. This manifests itself both in terms of mass loss and molecular weight degradation as measured by gel permeation chromatography. This decrease in the molecular weight may be in part responsible for the relatively fragile nature of the shells produced by this high temperature process. 9 refs., 6 figs., 2 tabs.

This document describes the operating procedure for the System Configuration Control Board (SCCB) performed in support of the Windows Calorimeter Control (WinCal) system. This board will consist of representatives from Babcock & Wilcox Hanford Company Babcock & Wilcox Protec, Inc.; and Lockheed Martin Services, Inc. In accordance with agreements for the joint use of the Babcock & Wilcox Hanford Company calorimeters located in the Hanford Site Plutonium Finishing Plant (PFP) Nondestructive Assay Laboratory, concurrence regarding changes to the WinCal system will be obtained from the International Atomic Energy Agency (IAEA). Further, changes to the WinCal software will be communicated to Los Alamos National Laboratory.

This document describes the system configuration management activities performed in support of the Windows Calorimeter Control (WinCal) system, in accordance with Site procedures based on Institute of Electrical and Electronic Engineers (IEEE) Standard 828-1990, Standard for Software Configuration Management Plans (IEEE 1990) and IEEE Standard 1042-1987, Guide to Software Configuration Management (IEEE 1987).