Report presenting an investigation of icing and ice protection at the inlet of a turbojet engine in the altitude wind tunnel. A method of ice protection was studied that uses hot gas bled from a turbine inlet and injected into the air stream ahead of the compressor inlet. Ice was either prevented or accumulated slowly at various engine speed levels.

From Summary: "A blade-element theory for axial-flow compressors has been developed and applied to the analysis of the effects of basic design variables such as Mach number, blade loading, and velocity distribution on compressor performance. The relations among several efficiencies useful in compressor design are derived and discussed. The possible gains in useful operating range obtainable by the use of adjustable stator blades are discussed and a rapid approximate method of calculating blade-angle resettings is shown by an example."

Report presenting an analysis of the spanwise loading using two different methods on the wing of an airplane for which pressure-distribution measurements were available from flight tests up to a Mach number of 0.866. A comparison between measured and calculated distributions was made on the basis of equal wing-panel normal-force coefficients.

Report presenting the results from tank landing and take-off tests with a dynamic model of a hypothetical jet-propelled airplane equipped with NACA hydro-skis. Results regarding landing tests, take-off tests, and practical considerations for the creation of hydro-ski configurations are provided. The hydro-skis suitable for flush retraction into streamline fuselages do appear to offer a practical means of water take-offs and landings.

"An investigation was conducted in the Cleveland altitude wind tunnel to determine the performance of a Curtiss propeller with four 838-1C2-1SR1 blades on a YP-47M airplane at high blade loadings and engine powers. The study was made for a range of power coefficients between 0.30 and 1.00 at free-stream Mach numbers of 0.40 and 0.50. The results of the force measurements indicate primarily the trend of propeller efficiency for changes in power coefficient or advance-diameter ratio, inasmuch as corrections for the effects of tunnel-wall constriction on the installation have not been applied" (p. 1).

"An altitude-wind-tunnel investigation has been made to determine the performance of a Curtiss 732-1C2-0 four-blade propeller on a YP-47M airplane at high blade loadings and engine power. Propeller characteristics were obtained for a range of power coefficients from 0.30 to 1.00 at free-stream Mach numbers of 0.40 and .50" (p. 1).