An international round robin study was conducted on the absorption measurement of laser-quality coatings. Sets of optically coated samples were made by a ''reactive DC magnetron'' sputtering and an ion beam sputtering deposition process. The sample set included a high reflector at 514 nm and a high reflector for the near infrared (1030 to 1318 nm), single layers of silicon dioxide, tantalum pentoxide, and hafnium dioxide. For calibration purposes, a sample metalized with hafnium and an uncoated, superpolished fused silica substrate were also included. The set was sent to laboratory groups for absorptance measurement of these coatings. Whenever possible, each group was to measure a common, central area and another area specifically assigned to the respective group. Specific test protocols were also suggested in regards to the laser exposure time, power density, and surface preparation.

Weekly newspaper from Albany, Texas that includes local, county, and state news along with extensive advertising.

Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

Weekly newspaper from Archer City, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

Weekly newspaper from Bogata, Texas that includes local, state, and national news along with advertising.

Weekly newspaper from Canadian, Texas that includes local, state and national news along with extensive advertising.

Weekly newspaper from Rusk, Texas that includes local, state and national news along with extensive advertising.

Weekly newspaper from The Colony, Texas that includes local, state, and national news along with advertising.

Weekly newspaper from Comanche, Texas that includes local, state, and national news along with advertising.

Several types of carbonaceous materials from Superior Graphite Co. were investigated for lithium ion intercalation. These commercially available cokes, graphitized cokes and graphites have a wide range of physical and chemical properties. The coke materials were investigated in propylene carbonate based electrolytes and the graphitic materials were studied in ethylene carbonate/dimethyl solutions to prevent exfoliation. The reversible capacities of disordered cokes are below 230 mAh/g and those for many highly ordered synthetic (artificial) and natural graphites approached 372 mAh/g (LiC{sub 6}). The irreversible capacity losses vary between 15 to as much as 200% of reversible capacities for various types of carbon. Heat treated cokes with the average particle size of 10 microns showed marked improvements in reversible capacity for lithium intercalation. The electrochemical characteristics are correlated with data obtained from scanning electron microscopy (SEM), high resolution transmission electron microscopy (TEM), X-ray diffraction (XRD) and BET surface area analysis. The electrochemical performance, availability, cost and manufacturability of these commercial carbons will be discussed.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Correspondence issued by the General Accounting Office with an abstract that begins "Defense offsets are the full range of industrial and commercial benefits that firms give to foreign governments as conditions for the purchase of military goods and services. They have gained attention because of the potential impact they may have on the economy and national security. In 1984 and 1999, data collection and reporting requirements were levied by Congress to obtain information on the impact of offsets on the U.S. industrial base; the Departments of Commerce, State, and Defense are all required to report to Congress on defense offsets. GAO found that although coordination of data collection is limited, it may not be significant because the agencies collecting offsets cover different time periods or situations. Additional coordination may occur after the National Commission on the Use of Offsets begins its work."

This document published results of iterative calculations for maximum tank farm transfer secondary pipe (encasement) pressure upon failure of the primary pipe. The maximum pressure was calculated from a primary pipe guillotine break. Results show encasement pipeline design or testing pressures can be significantly lower than primary pipe pressure criteria.

None

In this paper we have shown how the direction cosine method of stripmap-mode IFSAR maybe modified for use in the spotlight-mode case. Spotlight-mode IFSAR geometry dictates a common aperture phase center, velocity vector, and baseline vector for every pixel in an image. Angle with respect to the velocity vector is the same for every pixel in a given column and can be computed from the column index, the Doppler of the motion compensation point and the Doppler column sample spacing used in image formation. With these modifications, the direction cosines and length of the line of sight vector to every scatterer in the scene may be computed directly from the raw radar measurements of range, Doppler, and interferometric phase.

This document provides the calculated estimated dose rates for three external locations on the Rotary Mode Core Sampling (RMCS) exhauster HEPA filter housing, per the request of Characterization Field Engineering.

Weekly newspaper from Dublin, Texas that includes local, state, and national news along with advertising.

The overall objective of this project is the three phase development of an Early Entrance Coproduction Plant (EECP) which produces at least one product from at least two of the following three categories: (1) electric power (or heat), (2) fuels, and (3) chemicals. The objective is to have these products produced by technologies capable of using synthesis gas derived from coal and/or other carbonaceous feedstock. The objective of Phase I is to determine the feasibility and define the concept for the EECP located at a specific site and to develop a Research, Development, and Testing Plan (RD and T) for implementation in Phase II. The objective of Phase II is to implement the RD and T as outlined in the Phase I RD and T Plan to enhance the development and commercial acceptance of coproduction technology that produces high-value products, particularly those that are critical to our domestic fuel and power requirements. The project will resolve critical knowledge and technology gaps on the integration of gasification and downstream processing to coproduce some combination of power, fuels, and chemicals from coal and other feedstocks. The objective of Phase III is to develop an engineering design package and a financing plan for …

Only two intrinsic approaches to increasing the density of energy stored in capacitors are known: (1) Increase the Dielectric Constant while maintaining the breakdown filed; and (2) Increase the breakdown field for a given dielectric constant material. The maximum energy density, E{sub 0} (Joules/cm{sup 3}) that can be stored in the dielectric of a capacitor is given by: E{sub 0} = 1/2 k {var_epsilon}{sub 0} V{sub b}{sup 2} (Joules/cm{sup 3} dielectric). Where k is the relative permittivity (dielectric constant), {var_epsilon}{sub 0} is the permittivity of free space (8.894 x 10{sup -14} F/cm) and V{sub b} the dielectric material breakdown field. In this project we have successfully developed capacitor structures using dielectric materials with 3 < k < 50 that exhibit high breakdown fields. The observed performance of these capacitors as characterized by the energy stored per unit volume of dielectric at V{sub b} are compared on the basis of the breakdown field in Figure 1.

The carbon aerogel/carbon paper composites have physical properties similar to those of monolithic carbon aerogels but do not require supercritical extraction during fabrication. The resorcinol-formaldehyde based carbon aerogel phase is intertwined between the fibers of a commercial carbon paper. The resulting composites have variable densities (0.4-0.6 g/cc), high surface areas (300-600 m{sup 2}/g), and controllable pore sizes and pore distribution. The effects of the resorcinol-formaldehyde concentrations (50-70% w/v) and the pyrolysis temperature (600-1050 C) were studied in an attempt to tailor the aerogel microstructure and properties. The composite physical properties and structure were analyzed by transmission electron microscopy and multipoint-BET analyses and related to electrochemical capacitive data in 5M KOH. These thin carbon aerogel/carbon paper composite electrodes are used in experiments with electrochemical double-layer capacitors and capacitive deionization.

Weekly newspaper from Electra, Texas that includes local, state, and national news along with advertising.

Ensemble performance at the UNT College of Music.

Concert presented at the UNT College of Music.