The method of two pion interferometry was used to obtain source-size and lifetime parameters for the pions produced in heavy ion collisions. The systems used were 1.70 {center dot} A GeV {sup 56}Fe + Fe, 1.82 {center dot} A GeV {sup 40}Ar + KCl and 1.54 {center dot} A GeV {sup 93}Nb + Nb, allowing for a search for dependences on the atomic number. Two acceptances (centered, in the lab., at {approximately} 0{degrees} and 45{degrees}) were used for each system, allowing a search for dependences on the viewing angle. The correlation functions were calculated by comparing the data samples to background (or reference) samples made using the method of event mixing, where pions from different events are combined to produce a data sample in which the Bose-Einstein correlation effect is absent. The effect of the correlation function on the background samples is calculated, and a method for weighting the events to remove the residual correlation effect is presented. The effect of the spectrometer design on the measured correlation functions is discussed, as are methods for correcting for these effects during the data analysis. 58 refs., 39 figs., 18 tabs.

This report details the performance of Phase II: Verification Tests of the Conspray dynamic sleeve piston coal feeder. The machine performed for 200 hours at 700 psi backpressure, utilizing a 70% to 200 mesh Utah bituminous coal as feedstock. All test work was satisfactorily completed. A post-test inspection was performed. A report of component wear and failures incurred in testing is included as well as suggestions for machine upgrades. The overall conclusion is that the dynamic sleeve piston feeder has proven its ability to operate safely and reliably. When problems have occurred, the machine has demonstrated inherent safety by shutting down without endangering process or personnel. With the recommended improvements incorporated into the feeder, the unit will be ready for installation on a pilot scale coal gasifier. 9 figures, 11 tables.

Stacking, compression, and welding of the laminations for the TeV I Large Bore Quad results in a deformation due to springback which is unacceptable due to magnetic field requirements. ANSYS has been used to analyze a solution to this problem.

This report documents the technical evaluation of the proposed design modifications and Technical Specification changes for protection of Class 1E equipment from grid voltage degradation for the San Onofre Nuclear Generating Station, Unit 1. The review criteria are based on several IEEE standards and the Code of Federal Regulations. The evaluation finds that the proposed design modifications and Technical Specification changes will ensure that the Class 1E equipment will be protected from sustained voltage degradation.

We report the design and status of an FEL experiment at the Brookhaven National Laboratory Accelerator Test Facility. A 50 MeV high brightness electron beam will be utilized for an oscillator experiment in the visible wavelength region. The microwiggler to be used is a superferric planar undulator with a 0.88 cm period, 60 cm length and K = 0.35. The optical cavity is a 368 cm long stable resonator with broadband dielectric coated mirrors. 8 refs., 2 figs., 4 tabs.

In SIII-D, good H-mode confinement has been obtained with up to 6 MW of neutral-beam injection (NBI). In this report we summarize the essential features of divertor operation for DIII-D H-mode plasma. Briefly, our measurements show that: Large edge density and temperarture gradients are obtained with scale lengths of a few cm at the midplane; In the steady state, approximately 10-20% of the input power is deposited on the divertor plates in a region that is peaked on the separatrix and extends radially over )approx equal) 2-4 cm at the outboard intercept. More power (2:1) reaches the outboard intercept than the inboard; Low electron temperature (less than or equal to20eV) and high density (n/sub e//sup div/ )approx equal) n/sub e//sup main/ greater than or equal to 3-10 )times)10/sup 19/ m/sup -3/ at the divertor plates indicate that DIII-D obtains a high-recycling divertor during H-mode. DEGAS neutral transport modeling is consistent with these results; The duration of good H-mode confinement is limited by Edge Localized Modes (ELMs) rather than increasing impurity radiation; The dominant impurities, C and Ni are concentrated in the edge plasma (ra greater than or equal to 0.5) for I/sub p/ greater than or equal to 1 MA; …

Four alternative theories of oil inventory management and their implication for the level of private petroleum stockpiling are explored. The assumptions made were: that the product market for oil is competitive and that the capital market through which investments in oil stockpiles are financed is efficient. It is assumed that these conditions are expected to prevail even in the event of a supply interruption. These assumptions constitute the benchmark theory of oil inventory management. Variations on this theme provide the alternative theories of inventory behavior explored.

A laser pyrolysis technique is applied to the investigation of the effects of heating rate on release of coal-bound sulfur and nitrogen. An experimental system characterization and calibration has been completed. A detailed documentation was prepared describing the 3-color pyrometer and the data analysis technique. The coal particle feed system has been calibrated to provide accurate mass flow rate at pre-selected particle velocities. The first batch of samples submitted for chemical analysis will be used for the determination of kinetics parameters at a high heating rate (approximately equal to 10/sup 6/ K/s). The coal used presently is a Montana Rosebud. Two other coals are available; one is ILL No. 6 (through EERC) which will need to be pulverized and the second is a Pitt. hv-A (through KVB). It was confirmed that sieve and drag size distribution of coal differ significantly, and that particle shape effects may be significant in the modelling of particle dynamics.

We report here the low emittance beam transport line for laser acceleration experiments at the Brookhaven Accelerator Test Facility (ATF). In order to preserve the low emittance ({approximately} 10{sup -10} m-rad) 50 MeV electron beam, great care has to be paid to the higher-order effects. The low-emittance transport line consists of two parts; the first part performs and emittance selection, and the other part provides the possibility of energy selection and beam transport to the experimental area. 7 refs., 5 figs., 7 tabs.

The potential for minerals recovery from a 1000-MWe combined geothermal power and minerals recovery plant in the Salton Sea is examined. While the possible value of minerals recovered would substantially exceed the revenue from power production, information is insufficient to carry out a detailed economic analysis. The recovery of precious metals - silver, gold, and platinum - is the most important factor in determining the economics of a minerals recovery plant; however, the precious metals content of the brines is not certain. Such a power plant could recover 14 to 31% of the US demand for manganese and substantial amounts of zinc and lead. Previous work on minerals extraction from Salton Sea brines is also reviewed and a new process, based on a fluidized-bed cementation reaction with metallic iron, is proposed. This process would recover the precious metals, lead, and tin present in the brines.

This report documents the technical evaluation of the monitoring of electric power to the reactor protection system (RPS) at the Brunswick Steam Electric Plant, Units 1 and 2. The evaluation is to determine if the proposed design modification will protect the RPS from abnormal voltage and frequency conditions which could be supplied from the power supplies and will meet certain requirements set forth by the Nuclear Regulatory Commission. The proposed design modifications with time delays verified by GE, will protect the RPS from sustained abnormal voltage and frequency conditions from the supplying sources.

This note reports measurements of the response of a Fermilab-designed area monitor ionization chamber used in Chipmunk and Scarecrow detectors to pulsed photon fields of various intensities and durations. The measurements were made to better define the operating limits of the instruments and to understand the possible effects of recombination and space charge on the dose measured by the instruments in pulsed fields. 2 refs., 13 figs., 1 tab.

We have constructed a state-of-the-art equation of state (EOS) for argon covering the temperature density range attainable by currently proposed self-excited MHD generators. The EOS for conditions in the flow channel was obtained primarily by a non-ideal plasma code (ACTEX) that is based on a many body activity expansion. For conditions in the driver chamber the EOS was primarily obtained from a fluid code (HDFP) that calculates the fluid properties from perturbation theory based on the insulator interatomic pair potential but including electronic excitations. The results are in agreement with several sets of experimental data in the 0.6 - 91 GPa pressure range.

Determining the age of groundwater from monitoring wells can greatly aid in understanding a hydrologic system. Groundwater dating techniques have been used to estimate residence times ranging from about 1000 to 50,000 years. While such measurements have been very useful in hydrothermal and geochemical studies and in the development of groundwater supplies, they have been of limited use in contaminant studies associated with shallow groundwater systems since residence times are often much less than 1000 years.

The purpose of this study is to determine the mechanisms involved in the catalytic reactions of coal char and to identify the specific reaction steps and the parameters that control the catalytic process. The mode of action of the catalyst can be viewed in two ways. In one view, the catalyst participates in a reduction/oxidation cycle. The initial reaction between the carbon and the catalyst reduces the KOH to potassium accompanied by the gaseous reactant (H/sub 2/O or CO/sub 2/), producing further gaseous products (CO and H/sub 2/) and regenerating the initial state of the catalyst. In an alternative view, the catalyst initially forms an alkali metal addition compound with the carbon network of the char. The carbon-carbon bonds are altered by the formation of the metal-carbon linkage, possibly by electron transfer from the alkali metal atom to the carbon structure. As a result, the carbon structure is more readily attacked by the gaseous reactant (CO or H/sub 2/O) to produce the products of gasification. The following areas were investigated to provide experimental evidence for these catalytic modes of action: chemical kinetic measurements; thermodynamic measurements; free radicals in reacting carbon; electrical conductivity measurements. A detailed discussion on the catalyst-carbon interaction …

Anemometers were placed at four selected sites in North Georgia during the period July, 1980, to June, 1982. Regular wind speed readings were taken using accumulating recorders and average daily wind speeds calculated for each location. Three wind speed categories were determined: (a) average below 7 mph; (b) average between 7 and 25 mph; (c) average above 25 mph. One site was abandoned after seven months due to lack of expected wind; another site was closed after 4.5 months due to continuing excessive and damaging winds. Two sites were determined, after 12 to 20 months of data collecting respectively, to have sufficient wind resources in a usable time pattern to merit further investigation.

A procedure has been developed for matching prospective users and producers of synthetic fuels. The matching procedure, which involves a hierarchical screening process, is designed to assist OFC in: locating a supplier for a firm that wishes to obtain synthetic fuel exemption (Fuel Use Act); determining whether the fuel supplier proposed by a petitioner is technically and economically capable of meeting the petitioner's needs; and assisting the Synthetic Fuels Corporation in evaluating potential markets for synthetic fuels. Application of the screening procedure resulted in the identification of one or more candidates for supplying synthetic fuel to each of the prospective users. In this report the development of the screening procedure is described. Chapter 1 contains a detailed description of the seven screens; Chapter 2 describes the development of the hierarchical procedure for applying the screens to each synthetic fuels project; Chapter 3 describes the modification of the screening procedure for low and medium Btu gas; Chapter 4 describes the application of the procedure. Appendix A is a list of references used in developing the procedure; Appendix B is a detailed listing of proposed and ongoing synthetic fuel projects.

Studies of the chemistry of the zirconium-iodine and zirconium-oxygen systems were undertaken to elucidate their thermodynamics and kinetics. It is anticipated that the results obtained will lead to an improved understanding of the chemical processes involved in chemically assisted fuel rod failures. This project not only has classified the thermodynamics of both the gas phase and the solids in the zirconium-iodine system, it has also provided valuable information on the chemisorption of iodine and of oxygen on zirconium surfaces at high temperatures. In addition, the kinetics of reactions on zirconium surfaces were studied. These results have already been helpful in understanding the stress corrosion cracking of Zircaloy.

This report summarizes results from the successful experimental operation of the Tandem Mirror Experiment (TMX) over the period October 1978 through September 1980. The experimental program, summarized by the DOE milestones given in Table 1-1, had three basic phases: (1) an 8-month checkout period, October 1978 through May 1979; (2) a 6-month initial period of operation, June through November 1979, during which the basic principles of the tandem configuration were demonstrated (i.e., plasma confinement was improved over that of a single-cell mirror); and (3) a 10-month period, December 1979 through September 1980, during which the initial TMX results were corroborated by additional diagnostic measurements and many detailed physics investigations were carried out. This report summarizes the early results, presents results of recent data analysis, and outlines areas of ongoing research and data analysis which will be reported in future journal publications.

Ohio Clean Fuels, Inc., (OCF) has licensed technology that involves Co-Processing (Co-Pro) poor grade (high sulfur) coal and residual oil feedstocks to produce clean liquid fuels on a commercial scale. Stone Webster is requested to perform a comparative technologies report for grassroot plants utilizing coal as a base fuel. In the case of Co-Processing technology the plant considered is the nth plant in a series of applications. This report presents the results of an economic comparison of this technology with other power generation technologies that use coal. Technologies evaluated were:Co-Processing integrated with simple cycle combustion turbine generators, (CSC); Co-Processing integrated with combined cycle combustion turbine generators, (CCC); pulverized coal-fired boiler with flue gas desulfurization and steam turbine generator, (PC) and Circulating fluidized bed boiler and steam turbine generator, (CFB). Conceptual designs were developed. Designs were based on approximately equivalent net electrical output for each technology. A base case of 310 MWe net for each technology was established. Sensitivity analyses at other net electrical output sizes varying from 220 MWe's to 1770 MWe's were also performed. 4 figs., 9 tabs.

Summary describing research projects and other activities undertaken by the U.S. National Bureau of Standards, lists of publications from the year, and a calendar of upcoming events.

The nuclear reactor industry has been in a state of decline for more than a decade in most of the world. The reasons are numerous and often unique to the energy situation of individual countries. Two commonly cited issues influence decisions relating to construction of reactors: costs and the need, or lack thereof, for additional generating capacity. Public concern has ''politicized'' the nuclear industry in many non-communist countries, causing a profound effect on the economics of the option. The nuclear installations and future plans are reviewed on a country-by-country basis for 36 countries in the light of the resources and objectives of each. Because oil and gas for power production throughout the world are being phased out as much as possible, coal-fired generation currently tends to be the chosen alternative to nuclear power production. Exceptions occur in many of the less developed countries that collectively have a very limited operating experience with nuclear reactors. The Chernobyl accident in the USSR alarmed the public; however, national strategies and plans to build reactors have not changed markedly in the interim. Assuming that the next decade of nuclear power generation is uneventful, additional electrical demand would cause the nuclear power industry to experience …

Secondary ion mass spectrometry and Auger electron spectrometry depth profiling were used to determine impurity distributions in sputter deposited tungsten films over N-type and P-type 80/20 silicon-germanium elements of thermoelectric devices. These analyses showed that silicon, oxygen, sodium, boron, and phosphorous were present as impurities in the tungsten film. All these impurities except oxygen and sodium came from the substrate. Oxygen was gettered by the tungsten films, while sodium was possibly the result of sample handling. Further, the results from this study indicate that an oxide build-up, primarily at the tungsten/silicon-germanium interface of the N-type materials, is the major contributor to contact resistance in thermoelectric devices.

Our studies focus on attempting to understand the role of decomposer-primary producer linkages in successional dynamics. We are testing a series of hypotheses that relate changes in plant species composition during succession to changes in activity and structure of the soil microfloral and faunal community, dynamics of soil organic matter, and availability of soil nutrients. As these successional patterns are identified, they are being applied to understanding specific processes and mechanics involved in ecosystem development during recovery from moderate and severe disturbances. These findings are then being used in conjunction with simulation models to assess potential effects of climate change on ecosystems. Our research involves field studies in northwestern Colorado and southeastern Washington, laboratory studies, and simulation modeling. Ongoing projects include studies of response patterns of primary producer and soil microbial communities to nutrient additions (N, P, and sucrose), the function of mycorrhizal fungi in plant community development, and the dynamics of litter decomposition under semiarid conditions. New studies are being implemented to investigate the significance of nutrient transfers from VAM fungi to plants and plant-root exudate interactions, and to relate this to understanding their roles in succession.