Optical interference microscopy plays an important role in the measurement of targets for inertial confinement fusion experiments. We describe how these techniques are applied to the measurement of thickness and refractive index of multilayer films on both flat substrates and microsphere targets. We also discuss procedures for manipulating and examining microsphere targets to measure defects and wall thickness variations anywhere on the target. Finally, we describe the use of optical interferometry to measure the individual components and final assembled structure of double-shell targets. The accuracy of these measurements is from 0.03 to 0.5 ..mu..m, depending on the specific application.

Spherical laser fusion targets can be levitated on beams of Ar or other gas atoms. This is an especially useful and reliable technique for supporting microspheres during plasma coating or plasma etching. The reliability of this technique is principally the result of two things: the success of a special centering device which provides a lateral, stabilizing force on the levitated microspheres; and a gas handling system which is capable of controlling levitation gas flow in the microtorr liter/sec range. We have determined that the operational regime of this device is that of Knudsen's flow. This knowledge of the flow characteristics has been important in developing this device.

We have analyzed one specific NOVA double-shell target design and have determined the x-ray energies required for probing the performance of the implosion. It is virtually impossible to study the compression of the fuel or the motion of the inner pusher. An x-ray energy of about 9 keV appears to be ideal for measuring the behavior of the outer TaCOH shell for the majority of its travel. However, it would be advantageous to have an x-ray source of about 25 keV to measure the contact between the two shells. Development of narrowband x-ray line sources are more desirable than broadband continuum sources since the intensity per keV is many times greater in the line. Intensities of the probes are determined by the self-emission levels of the target capsule. For the 9 keV line source, an intensity of upwards to 10/sup 15/ keV/keV/sh/cm/sup 2//sr is required with a source area of about 0.01 cm/sup 2/.

Spherical targets can be levitated on beams of Ar or other gas atoms. This is an especially useful technique for supporting microspheres during plasma coating and processing. Measurements of gas flow and pressure indicate that the levitation device operates in the regime of Knudsen's flow. This device is currently being used in the development of future generation laser targets.

Coatings for laser fusion targets were deposited up to 135 ..mu..m thick by plasma polymerization onto 140 ..mu..m diameter DT filled glass microspheres. Ultrasmooth surfaces (no defect higher than 0.1 ..mu..m) were achieved by eliminating particulate contamination. Process generated particles were eliminated by determining the optimum operating conditions of power, gas flow, and pressure, and maintaining these conditions through feedback control. From a study of coating defects grown over known surface irregularities, a quantitative relationship between irregularity size, film thickness, and defect size was determined. This relationship was used to set standards for the maximum microshell surface irregularity tolerable in the production of hydrocarbon or fluorocarbon coated laser fusion targets.

First generation hemishells, from which spherical shells are constructed, were fabricated by micromachining coated mandrels and by molding. The remachining of coated mandrels are described in detail. Techniques were developed for coating the microsized mandrels with polymeric and metallic materials by methods including conformal coating, vapor deposition, plasma polymerization and thermoforming. Micropositioning equipment and bonding techniques have also been developed to assemble the hemishells about a fuel pellet maintaining a spherical concentricity of better than 2 ..mu..m and voids in the hemishell bonding line of a few hundred angstroms or less.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification; Time credit prices for prepaid funeral contracts

Weekly newspaper from Coleman, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Sulphur Springs, Texas that includes local, state, and national news along with advertising.

Metal coated laser fusion targets must be dense, uniform spherically symmetric to within a few percent of their diameters and smooth to better than a few tenths of a micron. Electroplating offers some unique advantages including low temperature deposition, a wide choice of elements and substantial industrial plating technology. We have evaluatd electroless and electroplating systems for gold and copper, identified the factors responsible for small grain size, and plated glass microspheres with both metals to achieve smooth surfaces and highly symmetric coatings. We have developed plating cells which sustain the microspheres in continuous random motion during plating. We have established techniques for deposition of the initial conductive adherent layer on the glass microsphere surface. Coatings as thick as 15 ..mu..m have been made. The equipment is simple, relatively inexpensive and may be adopted for high volume production of laser fusion targets.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.