When 001 plates of KD{sub 2}PO{sub 4} (KD*P) are used in Pockels cells, strain induced refractive index variations result in beam depolarization and transmitted wavefront distortion. The depolarization is determined by the induced birefringence while the wavefront distortion is controlled by the average index shift. Here we show that the birefringence is determined by the shear stress in the xy-plane of the crystal while the average index shift depends only on the normal stresses. Furthermore, for depolarization losses of 0.1 to 1.0% and wavefront distortion of 0.1 to 1.0{lambda}, the critical range of stress is 10{sup 5} to 10{sup 6} Pa. We also present measured depolarization loss and wavefront distortion profiles for 5, 16 and 27cm, 95% deuterated, KD*P crystals. Using the analysis described above we show that the maximum internal stresses in the crystals are within the critical range, but that the area averaged stresses are substantially lower. We find that crystals from different locations along the length of a boule have similar strain birefringence and wavefront distortion profiles indicating that the growth conditions which generate the internal strain persist throughout much of the growth history of the boule. Finally, we discuss potential sources of strain in KD*P. 8 …

Optical interference microscopy plays an important role in the measurement of targets for inertial confinement fusion experiments. We describe how these techniques are applied to the measurement of thickness and refractive index of multilayer films on both flat substrates and microsphere targets. We also discuss procedures for manipulating and examining microsphere targets to measure defects and wall thickness variations anywhere on the target. Finally, we describe the use of optical interferometry to measure the individual components and final assembled structure of double-shell targets. The accuracy of these measurements is from 0.03 to 0.5 ..mu..m, depending on the specific application.

Spherical laser fusion targets can be levitated on beams of Ar or other gas atoms. This is an especially useful and reliable technique for supporting microspheres during plasma coating or plasma etching. The reliability of this technique is principally the result of two things: the success of a special centering device which provides a lateral, stabilizing force on the levitated microspheres; and a gas handling system which is capable of controlling levitation gas flow in the microtorr liter/sec range. We have determined that the operational regime of this device is that of Knudsen's flow. This knowledge of the flow characteristics has been important in developing this device.

A continuous wave doppler radar system has been designed which is portable, easily deployable and can be remotely controlled. The system is immune to ground clutter and is used for wind speed detection and direction determination. Nearly real time digital signal processing is performed by an Analog Devices ADSP-21020, a 40-bit floating point Digital Signal Processing (DSP) microprocessor. This paper provides an overview of the design of the system including the radio frequency (RF) to digital interface. The various DSP detection algorithms are discussed and compared to system performance and sensitivity. Finally, DSP performance is compared to the performance of an earlier system using Analog Device's ADSP-2100. 6 refs.

The effect of heat-island reduction (HIR) strategies on annual energy savings and peak-power avoidance of the building sector of the Greater Toronto Area is calculated, using an hourly building energy simulation model. Results show that ratepayers could realize potential annual energy savings of over $11M from the effects of HIR strategies. The residential sector accounts for over half (59%) of the total savings, offices 13% and retail stores 28%. Savings from cool roofs are about 20%, shade trees 30%, wind shielding of trees 37%, and ambient cooling by trees and reflective surfaces 12%. These results are preliminary and highly sensitive to the relative price of gas and electricity. Potential annual electricity savings are estimated at about 150GWh and potential peak-power avoidance at 250MW.

We review recent work on understanding the next to leading order corrections to the classical fields that dominate the initial stages of a heavy ion collision. We have recently shown that the leading ln 1/x divergences of these corrections to gluon multiplicities can be factorized into the JIMWLK evolution of the color charge density distributions.

The performance of spherical Resorcinol-Formaldehyde ion-exchange resin for the removal of cesium from alkaline radioactive waste solutions has been investigated through computer modeling. Cesium adsorption isotherms were obtained by fitting experimental data using a thermodynamic framework. Results show that ion-exchange is an efficient method for cesium removal from highly alkaline radioactive waste solutions. On average, two 1300 liter columns operating in series are able to treat 690,000 liters of waste with an initial cesium concentration of 0.09 mM in 11 days achieving a decontamination factor of over 50,000. The study also tested the sensitivity of ion-exchange column performance to variations in flow rate, temperature and column dimensions. Modeling results can be used to optimize design of the ion exchange system.

This paper discusses the potential for developing a polycrystalline diamond compact (PDC) drill bit for hard-rock applications such as geothermal drilling. It is concluded that in order to use the inherently efficient drag cutting process in such severe applications, measures must be taken to reduce cutter penetrating forces in order to prevent thermally-accelerated cutter wear and thereby improve bit life. A procedure is developed for determining the conditions under which waterjets can be effectively used for this purpose by directing them at the rock surface ahead of individual cutters. It is concluded that hard rocks with compressive strengths as high as 30 kpsi (200 MPa) may be drillable with a hybrid PDC/waterjet bit using pressures that conventional oil field pumping technology is capable of providing. Extremely hard rocks might be drilled with such a bit using nozzle pressures well below those required to effectively cut the rock with waterjets alone. 13 refs., 6 figs.

The evolution of magnetized neutron stars with field strengths of approx. 10/sup 12/ gauss that are accreting mass onto kilometer-sized polar regions at a rate of approx. /sup 13/ M/sub 0/yr/sup -1/ is examined. Based on the results of one-dimensional calculations, one finds that stable hydrogen burning, mediated by the hot CNO-cycle, will lead to a critical helium mass in the range 10/sup 20/ to 10/sup 22/ g km/sup -2/. Owing to the extreme degeneracy of the electron gas providing pressure support, helium burning occurs as a violent thermonuclear runaway which may propagate either as a convective deflagration (Type I burst) or as a detonation wave (Type II burst). Complete combustion of helium into /sup 56/Ni releases from 10/sup 38/ to 10/sup 40/ erg km/sup -2/ and pushes hot plasma with ..beta.. > 1 above the surface of the neutron star. Rapid expansion of the plasma channels a substantial fraction of the explosion energy into magnetic field stress. Spectral properties are expected to be complex with emission from both thermal and non-thermal processes. The hard ..gamma..-outburst of several seconds softens as the event proceeds and is followed by a period, typically of several minutes duration, of softer x-ray emission as …

Efficient linear colliders require very small beam spots to produce high luminosities with reasonable input power, which limits the number of electrons which can be accelerated to high energies. The small beams, in turn, require high precision and stability in all accelerator components. Producing, monitoring and maintaining beams of the required quality has been, and will continue to be, difficult. A beam monitoring system which could be used to measure beam profile, size and stability at the final focus of a beamline or collider has been developed and is described here. The system uses nonimaging bremsstrahlung optics. The immediate use for this system would be examining the final focus spot at the SLAC/FFTB. The primary alternatives to this technique are those proposed by P. Chen / J. Buon, which analyses the energy and angular distributions of ion recoils to determine the aspect ratio of the electron bunch, and a method proposed by Shintake, which measures intensity variation of compton backscattered photons as the beam is moved across a pattern of standing waves produced by a laser.

Fenton Hill Hot Dry Rock Geothermal Site Well EE-3 was designed and completed to function as a completion of the reservoirs with the injection well, EE-2, progressed it become evident that it would be desirable to fracture in EE-3 as well to obtain a flow connection between the wells. Unfortunately, the 9-5/8'' od production casing in EE-3 had been pretensioned to 885,000 lbs to accommodate its intended service as a hot water production well. Cool-down of the casing was thus limited to only 11/sup 0/C (20/sup 0/F) to keep the stress in the top joints of the casing below the minimum yield stress, or else the pretension had to be released. Before incurring the risk and expense required to release the tension, fracturing experiments were performed to evaluate the use gaseous nitrogen and 75% quality nitrogen-gel foam as insulating media in an annular wellbore configuration, i.e., the nitrogen gas or foam was placed in the annular gap between the tubing string and the casing.

Spherical targets can be levitated on beams of Ar or other gas atoms. This is an especially useful technique for supporting microspheres during plasma coating and processing. Measurements of gas flow and pressure indicate that the levitation device operates in the regime of Knudsen's flow. This device is currently being used in the development of future generation laser targets.

Coatings for laser fusion targets were deposited up to 135 ..mu..m thick by plasma polymerization onto 140 ..mu..m diameter DT filled glass microspheres. Ultrasmooth surfaces (no defect higher than 0.1 ..mu..m) were achieved by eliminating particulate contamination. Process generated particles were eliminated by determining the optimum operating conditions of power, gas flow, and pressure, and maintaining these conditions through feedback control. From a study of coating defects grown over known surface irregularities, a quantitative relationship between irregularity size, film thickness, and defect size was determined. This relationship was used to set standards for the maximum microshell surface irregularity tolerable in the production of hydrocarbon or fluorocarbon coated laser fusion targets.

This paper describes a design study which establishes the physical parameters of the low energy beam transport, radiofrequency quadrupole, and linac, using computer programs available at Fermilab. Beam dynamics studies verify that the desired beam parameters can be achieved. The machine described here meets the aforementioned requirements and can be built using existing technology. Also discussed are other technically feasible options which could be attractive to clinicians, though they would complicate the design of the machine and increase construction costs. One of these options would allow the machine to deliver 2.3 MeV protons to produce epithermal neutrons for treating brain tumors. A second option would provide 15 MeV protons for isotope production. 21 refs., 33 figs.

First generation hemishells, from which spherical shells are constructed, were fabricated by micromachining coated mandrels and by molding. The remachining of coated mandrels are described in detail. Techniques were developed for coating the microsized mandrels with polymeric and metallic materials by methods including conformal coating, vapor deposition, plasma polymerization and thermoforming. Micropositioning equipment and bonding techniques have also been developed to assemble the hemishells about a fuel pellet maintaining a spherical concentricity of better than 2 ..mu..m and voids in the hemishell bonding line of a few hundred angstroms or less.

The Scaled Thermal Explosion Experiment (STEX) has been developed to quantify the violence of thermal explosion under well defined and carefully controlled initial and boundary conditions. Here we present results with HMX-based explosives (LX-04 and PBX-9501) and with Composition B. Samples are 2 inches (50 mm) in diameter and 8 inches (200 mm) in length, under confinement of 7,500-30,000 psi (50-200 MPa), with heating rates of 1-3 C/hr. We quantify reaction violence by measuring the wall velocity in the ensuing thermal explosion, and relate the measured velocity to that expected from a detonation. Results with HMX-based explosives (LX-04 and PBX-9501) have shown the importance of confinement and HMX solid phase, with reaction violence ranging from mild pressure bursts to near detonations. By contrast, Composition B has shown very violent reactions over a wide range of conditions.

We developed a reduced description of kinetic effects that is included in a fluid model of stimulated Brillouin backscattering (SBS) in low Z plasmas (e.g. He, Be). Following hybrid-PIC simulations, the modified ion distribution function is parametrized by the width {delta} of the plateau created by trapping around the phase velocity of the SBS-driven acoustic wave. An evolution equation is derived for {delta}, which affects SBS through a frequency shift and a reduced Landau damping. This model recovers the linear Landau damping value for small waves and the time-asymptotic nonlinear frequency shift calculated by Morales and O'Neil. Finally we compare our reduced model with Bzohar simulations of a Be plasma representative of experiments that have shown evidence of ion trapping.

None

Quantities and compositions of non-tritium radioactive waste are estimated for some current conceptual fusion reactor designs, and disposal of large amounts of radioactive waste appears necessary. Although the initial radioactivity of fusion reactor and fission reactor wastes are comparable, the radionuclides in fusion reactor wastes are less hazardous and have shorter half-lives. Areas requiring further research are discussed.

None

Continuum mechanics relies on the fundamental notion of a mesoscopic volume"element" in which properties averaged over discrete particles obey deterministic relationships. Recent work on granular materials suggests a continuum law may be inapplicable, revealing inhomogeneities at the particle level, such as force chains and slow cage breaking. Here, we analyze large-scale three-dimensional Discrete-Element Method (DEM) simulations of different granular flows and show that an approximate"granular element" defined at the scale of observed dynamical correlations (roughly three to five particle diameters) has a reasonable continuum interpretation. By viewing all the simulations as an ensemble of granular elements which deform and move with the flow, we can track material evolution at a local level. Our results confirm some of the hypotheses of classical plasticity theory while contradicting others and suggest a subtle physical picture of granular failure, combining liquid-like dependence on deformation rate and solid-like dependence on strain. Our computational methods and results can be used to guide the development of more realistic continuum models, based on observed local relationships betweenaverage variables.

Anion exchange with S was performed on ZnO colloidal nanoparticles. The resulting hollow ZnS nanoparticles are crystal whose shape is dictated by the initial ZnO. Crystallographic and elemental analyses provide insight into the mechanism of the anion exchange.

None

Simulations have been performed in Omega3P to study both trapped modes and impedance contributions of a rotatable collimator for the LHC phase II collimation upgrade. Bench-top stretched coil probe impedance methods are also being implemented for measurements on prototype components to directly measure the low frequency impedance contributions. The collimator design also calls for a RF contact interface at both jaw ends with contact resistance much less than a milliohm in order to limit transverse impedance. DC resistance measurements in a custom built test chamber have been performed to test the performance of this interface.