Report presenting an investigation to determine the effects of spanwise and chordwise external store location on the aerodynamic characteristics of a cambered 45 degree sweptback wing-body configuration at a range of Mach numbers. Information about the drag characteristics of the various configurations, lift characteristics, and longitudinal stability characteristics is presented.

Report presenting an investigation in the transonic blowdown tunnel between Mach numbers of 0.65 and 1.4 to determine whether the principles of the transonic area rule could be used to improve the transonic drag-rise characteristics of a semielliptical shaped sweptback air inlet installed in the root of a sweptback wing-body combination. Results regarding the effect of the inlet and the interaction of Mach number and drag coefficient are provided.

Report presenting the use of wall perforations on supersonic diffusers to avoid the internal contraction-ratio limitation. Experimental results on a preliminary model of a perforated diffuser at Mach number 1.85 are provided. A theoretical discussion of the flow coefficients and the size and spacing of the perforations are included.

A vector study of the partial-differential equation of steady linearized supersonic flow is presented. General expressions which relate the velocity potential in the stream to the conditions on the disturbing surfaces, are derived. In connection with these general expressions the concept of the finite part of an integral is discussed. A discussion of problems dealing with planar bodies is given and the conditions for the solution to be unique are investigated. Problems concerning nonplanar systems are investigated, and methods are derived for the solution of some simple nonplanar bodies. The surface pressure distribution and the damping in roll are found for rolling tails consisting of four, six, and eight rectangular fins for the Mach number range where the region of interference between adjacent fins does not affect the fin tips.

The weight breakdowns in bar chart form in the present report have been prepared to give an indication of 'how we spend our weight.' They are expected to focus attention on the design functions that warrant weight reduction activity on future models.

Memorandum presenting the results of wind-tunnel oscillation tests to measure the rotary derivatives of a research airplane configuration at supersonic speeds. Measurements were made of the damping in yaw, pitch, and roll, the static longitudinal and directional stability derivatives, the effective-dihedral derivative, the rolling moment due to yawing, and the yawing moment due to rolling. The configuration was found to be statistically stable throughout the Mach number range, although its stability was becoming marginal at high angles of attack at Mach number 3.5.

Report discussing testing of a model of the Douglas A4D-1 to determine its low-speed yawing stability derivatives. The model was tested in clean and landing configurations with horizontal and vertical tails on and off and an investigation into the effect of slats and flaps on the wing-alone derivatives.

Report presenting an investigation in the 300 mph 7- by 10-foot tunnel to determine what modifications could be made to conventional bomb bays to reduce the tumbling difficulties experienced with light-weight bombs. The investigation indicated that there is a definite region of reversed flow inside the bomb bay which must be weakened or destroyed if good drops are to be obtained.

Report discussing an investigation into the mutual interference loads on a supersonic bomber configuration and store during separation of the store. Tests were performed at several airplane angles of attack, store angles of attack, and airplane sidestep angles. The aerodynamic characteristics of the various components and coefficients of forces are provided in tables.

Report presents the results of wind tunnel tests of the Clark Y, the NACA 23012 and the NACA 23021 airfoils equipped with full-span ordinary flaps and with full-span simple split flaps. The principal object of the tests was to determine the characteristics of the airfoils with ordinary flaps and in addition, to determine the relative merits of the various airfoils when equipped with either ordinary flaps or with simple split flaps. The Clark Y airfoil was tested with 3 widths of ordinary flap, 10, 20, and 30 percent of the airfoil chord.

Report presenting testing in the 300 mph tunnel of a model with a sweptback vee tail and a sweptback wing to determine its low-speed stability and control characteristics. The results are compared to testing with the same tail panel with zero dihedral on the same wing-fuselage combination. The longitudinal stability characteristics, downwash at the tail, longitudinal control characteristics, lateral stability characteristics, and rudder control characteristics are provided.

Report presenting an investigation of the flow field behind triangular wings alone and in combination with a pointed cylindrical body at Mach numbers of 1.5 and 2.0 through an angle-of-attack range of 0 to 24 degrees. Results regarding the geometric characteristics of the vortex system and downwash characteristics are provided.

Report presenting the results of oscillation tests to measure the dynamic-rotary stability derivatives of an airplane model at high subsonic speeds. Measurements taken included the damping in pitch, damping in yaw, damping in roll, and the yawing moment due to rolling velocity.

Report discussing zero-lift drag data for several bomb configurations at various Mach numbers. Seven configurations were tested with different combinations of interchangeable noses and tail cones with fins, some with different surface conditions. Surface conditions were not found to affect the drag, but the thickness of the tail fins and shape of the noses did change the shape of the drag curve.

Report presenting measurements of the longitudinal stability and control characteristics of a canard airplane configuration using the wing-flow method. The investigation included measurements of lift, pitching moment, and rolling moment of the semispan model with control settings between several different degrees. The experimental data are presented in summarized or abridged form and calculated trim curves are presented for various flight loading conditions.

"Working charts are given for the convenient selection of aluminum alloy propellers of a standard form, to operate in connection with six different engine-fuselage combinations. The charts have been prepared from full-scale test data obtained in the 20-foot propeller research tunnel of the National Advisory Committee for Aeronautics. An example is also given showing the use of the charts" (p. 3).