From Summary: "Approximate shapes of nonlifting bodies having minimum pressure foredrag at high supersonic airspeeds are calculated.With the aid of Newton's law of resistance, the investigation is carried out for various combinations of the conditions of given body length, base diameter, surface area, and volume. In general it is found that when body length is fixed, the body has a blunt nose; whereas, when the length is not fixed, the body has a sharp nose."

This report presents the comparative flight results of a roots supercharger and a turbocentrifugal supercharger. The tests were conducted using a modified DH-4M2 airplane. The rate of climb and the high speed in level flight of the airplane were obtained for each supercharger from sea level to the ceiling. The unsupercharged performance with each supercharger mounted in place was also determined. The results of these tests show that the ceiling and rate of climb obtained were nearly the same for each supercharger, but that the high speed obtained with the turbocentrifugal was better than that obtained with the roots. The high-speed performance at 21,000 feet was 122 and 142 miles per hour for the roots and turbocentrifugal, respectively.

From Summary: "The transonic similarity rules have been applied to the correlation of experimental data for a series of 22 rectangular wings having symmetrical NACA 63A-series sections, aspect ratios from 1/2 to 6, and thicknesses from 2 to 10 percent. The data were obtained by use of the transonic bump technique over a Mach number range from 0.40 to 1.10, corresponding to a Reynolds number range from 1.25 to 2.05 million. The results show that it is possible to correlate experimental data throughout the subsonic, transonic, and moderate supersonic regimes by using the transonic similarity parameters in forms which are consistent with the Prandtl-Glauert rule of linearized theory."

An analytical investigation of the effects of fuel density and heating value on the cruising range of a ram-jet airplane was made. Results indicate that with present-day knowledge of chemical fuels, neither very high nor very low fuel densities have any advantages for long-range flight. Of the fuels investigated, the borohydrides and metallic boron have the greatest range potential. Aluminum and aluminum hydrocarbon slurries were inferior to pure hydrocarbon fuel and boron-hydrocarbon slurries were superior on a range basis. It was concluded that the practical difficulties associated with the use of liquid hydrogen fuel cannot be justified on a range basis.

A study of the effect of fuel-orifice diameter on the performance of heptane-oxygen rocket engines with single-element injectors. Five engines with a range of thrust were tested with parallel-sheet, triplet, and parallel-jet injectors. Decreasing the fuel-orifice diameter was found to increase the performance for a fixed chamber length. Results regarding injector performance and a comparison of experimental and analytical results are provided.

Report presenting an investigation to determine if the combined stress-rupture plus fatigue strengths of three groups of Waspaloy with different aging treatments and/or molybdenum contents could be correlated with their stress-rupture ductilities and notch-rupture strengths. Waspaloy is of interest as a gas turbine-bucket alloy because it has low strategic material content and relatively good stress-rupture properties. Results regarding metallurgical evaluation of the failed specimens are also provided.

"A method of predicting equilibrium operating performance of turbojet engines has been developed, with the assumption of simple model processes for the components. Results of the analysis are plotted in terms of dimensionless parameters comprising critical engine dimensions and over-all operating variables. This investigation was made of an engine in which the ratio of axial inlet-air velocity to compressor-tip velocity is constant, which approximates turbojet engines with axial-flow compressors" (p. 673).

Report presenting measurements of the position errors of angle-of-attack and sideslip detectors located on the fuselage of a 35 degree swept-wing fighter airplane over a range of Mach numbers and at lift coefficients up to the buffet boundary. Results regarding the angle of attack and sideslip are provided.

An analysis has been made of the drag losses in airplane flight of cross-flow plate and tubular intercoolers to determine the cooling-air weight flow and pressure drop that give a minimum drag loss for any given cooling effectiveness and, thus, a maximum power-plant net gain due to charge-air cooling. The drag losses considered in this analysis are those due to (1) the extra drag imposed on the airplane by the weight of the intercooler, its duct, and its supports and (2) the drag sustained by the cooling air in flowing through the intercooler and its duct. The investigation covers a range of conditions of altitude, airspeed, lift-drag ratio, supercharger-pressure ratio, and supercharger adiabatic efficiency. The optimum values of cooling air pressure drop and weight flow ratio are tabulated. Curves are presented to illustrate the results of the analysis.

From Summary: "A photographic technique for investigating water droplets of diameter less than 200 microns falling freely in air at temperatures between 0 C and -50 C has been devised and used to determine: (1) The shape of frozen droplets, (2) The occurrence of collisions of partly frozen or of frozen and liquid droplets, and (3) The statistics on the freezing temperatures of individual free-falling droplets."

"A variable-area auxiliary air scoop in combination with a fixed-area nose intake was tested at Mach numbers from 0 to 1.3. The purpose of the investigation was to evaluate the effectiveness of such an auxiliary intake in improving the net thrust of an intake-engine combination over a range of speeds. The results indicated that the internal flow was always stable and that improvements in net thrust would be realized at Mach numbers up to about 1.1 for an intake design Mach number of 1.3" (p. 1).

Report discussing testing on the performance of two stator-blade shapes with and without boric oxide deposits. The deposits were found to cause total pressure losses and decreases in the blade-exit flow angle. Information about the cascade throat area, boundary-layer momentum thickness, total pressure ratio, and exit flow angle and tangential component of velocity is provided.

Report presenting the performance of two stator-blade shapes with and without boric oxide deposits, which was determined in a two-dimensional cascade. The differences between the blades were the amount of curvature and suction-surface diffusion downstream of the throat. Results regarding the cascade throat area, boundary-layer momentum thickness, total-pressure ratio, and exit flow angle and tangential component of velocity.

"This report presents some results obtained during an investigation to determine the relative characteristics for several methods of control of an overcompressed engine using gasoline and operating under sea-level conditions. For this work, a special single cylinder test engine, 5-inch bore by 7-inch stroke, and designed for ready adjustment of compression ratio, valve timing and valve lift while running, was used. This engine has been fully described in NACA-TR-250. Tests were made at an engine speed of 1,400 R. P. M. for compression ratios ranging from 4.0 to 7.6" (p. 329).

"An investigation of the rolling effectiveness of spoiler and aileron aerodynamic controls on a fighter-type airplane has been conducted at Mach numbers from 0.6 to 1.5 by the Langley Pilotless Aircraft Research Division by utilizing rocket-propelled test vehicles. No effects of mutual interference between the midspan spoiler and the outboard aileron were detectable. Above the speed of sound, the ailerons were relatively ineffective as compared with the spoiler because of wing twisting" (p. 1).

Report presenting an investigation of the rolling effectiveness of spoiler and aileron aerodynamic controls on a fighter-type airplane from Mach numbers 0.6 to 1.5. No effects of mutual interference between the spoiler and aileron were detectable. Results regarding drag and the effect of gap upon spoiler performance are also provided.

"The spin and recovery characteristics of the Northrop XF-89 airplane, as well as the spin-recovery parachute requirements, the control forces that would be encountered in the spin, and the best method for the crew to attempt an emergency escape are presented in this report. The characteristics were mainly estimated rather than determined by model tests because the XF-89 dimensional and mass characteristics were such as to make this airplane similar to several others, models of which have previously been tested. Brief tests were made on an available model of similar design to augment the estimation" (p. 1).

"Theoretical rocket performance for equilibrium composition during expansion was calculated for JP-4 fuel with several fluorine-oxygen mixtures for a range of pressure ratios and oxidant-fuel ratios. The parameters included are specific impulse, combustion-chamber temperature, nozzle-exit temperature, molecular weight, characteristic velocity, coefficient of thrust, ratio of nozzle-exit area to throat area, specific heat at constant pressure, isentropic exponent, viscosity, thermal conductivity, and equilibrium gas compositions. A correlation is given for the effect of chamber pressure on several of the parameters" (p. 1).

Report presenting tests of three types of nose shapes with a circular underslung inlet inlet located well forward of the body of revolution at a Mach number of 1.42. Total-pressure measurements and shadowgraphs of the different configurations were obtained.