Memorandum presenting an investigation of two annular diffusers of different conical angles of expansion but constant outer diameters with rotating flow behind a fan. The performance characteristics are determined and the rotational-kinetic-energy effects on the overall energy transformation are observed over a range of inlet mach numbers from 0.1 to 0.44 and angles of flow up to 28 degrees.

Report discussing flow surveys made of several nozzles using two 2-dimensional steps at Mach number 6.98. Results regarding wall-pressure surveys, disturbance patterns in expansion, total-pressure survey, temperature recovery, and general nozzle characteristics are provided.

Report presenting an experimental investigation of a submerged air inlet incorporating a cascade of airfoils for turning and diffusing the entering air. Variables associated with submerged air inlets and airfoil-cascade designs were considered, including changes to the ramp plan form and angle for the submerged inlet and the cascade-axis inclination, cascade-blade angle, solidity, and inclination of the center line of the duct for the cascade.

"Flight tests were conducted at the NACA Pilotless Aircraft Research Station, Wallops Island, to determine the characteristics of the Allegany Ballistics Laboratory's 6.2inch-diameter Deacon and 10-inch-scale model solid-propellant rocket motors. The tests were performed to assist in the development of these rockets which were designed for, and urgently needed to propel supersonic research models and pilotless aircraft. The tests showed that the rocket motors functioned properly under various flight- acceleration loads over a range of pre-ignition grain temperatures" (p. 1).

"A single-stage modification of the turbine from a Mark 25 torpedo power plant was investigated to determine the performance with two nozzle designs in combination with special rotor blades having a 20 inlet angle. The performance is presented in terms of blade, rotor, and brake efficiency as a function of blade-jet speed ratio for pressure ratios of 8, 15 (design), and 20. The blade efficiency with the nozzle having circular pas- sages (K) was equal to or higher than that with the nozzle having rectangular passages (J) for all pressure ratios and speeds investigated" (p. 1).

Wind-tunnel tests of a full-scale model of the Republic XF-91 airplane were conducted to determine the distribution of pressure over the external wing fuel tank installation and over the vee tail and ventral fin. The data were obtained for a range of angles of attack and sideslip and elerudder deflection angles; the presentation is in tabular form.

"The spin and recovery characteristics of the Northrop XF-89 airplane, as well as the spin-recovery parachute requirements, the control forces that would be encountered in the spin, and the best method for the crew to attempt an emergency escape are presented in this report. The characteristics were mainly estimated rather than determined by model tests because the XF-89 dimensional and mass characteristics were such as to make this airplane similar to several others, models of which have previously been tested. Brief tests were made on an available model of similar design to augment the estimation" (p. 1).

Report presenting an analytical study of four combinations of subsonic and supersonic flow in the rotor- and stator-blade passages of axial-flow compressors.