The objective of proposed research is development of catalysts with enhanced slurry phase activity and better selectivity to fuel range products, through a more detailed understanding and systematic studies of the effects of pretreatment procedures and promoters/binders (silica) on catalyst performance.

The objective of proposed research is development of catalysts with enhanced slurry phase activity and better selectivity to fuel range products, through a more detailed understanding and systematic studies of the effects of pretreatment procedures and promoters/binders (silica) on catalyst performance.

This report presents current data on production, consumption, stocks, imports, exports, and prices of the principal energy commodities in the United States. Also included are data on international production of crude oil, consumption of petroleum products, petroleum stocks, and production of electricity from nuclear-powered facilities.

Discussions in Japan from January 27-February 1, 1991 provided a basis for assessing the prospects for expanding commercial relations with the Soviet Union, perhaps as part of a Soviet/Japanese Summit to convene on April 16. These discussions included key Japanese industrialists, bankers, government officials and academics who influence policy. There was also a meeting of the Soviet-Japanese Business Cooperation Committee during the same period. The conditions from the Japanese perspective for favorable developments would appear to be four:

The North Endcap Calorimeter (NEC) is to be moved from the clean room to the north sidewalk in preparation for the final installation on the DO detector center beam. In order to make this move, the cable bridge must be 'flattened' and the NEC lifted to move over it. The detector is moved west, approximately 24 feet, while the moveable counting house remains stationary. This movement allows the cable bridge to 'flatten' i.e. become horizontal. The cable bridge lowering is steadied and stabilized by 7.5 ton hoist mounted on the moveable counting house. By moving the detector to lower the bridge, a vacancy has been created in the pit that must be filled to the level of the clean room rail elevation. This filler will consist of concrete shield blocks, stacked in two rows. These rows are spaced appropriately to match the wheel base of the EC transporter. A steel plate is placed on top of each row of shield blocks and leveled to the elevation of the clean room rails. Steel plates will be installed and leveled on the north sidewalk similar to those used on the south sidewalk for the CC installation. These plates are used as rails …

During the accelerator studies period of 12/90-1/91 efforts were made to improve the efficiency of crossing transition in the Accumulator. E760 wishes to measure the product of the branching ratios for {bar p}p {yields} {eta}{sub c} {yields} {gamma}{gamma} and the mass and width of the {eta}{sub c}. Since resonance production of the {eta}{sub c} requires a beam momentum of 3.67 Gev/c which is below the Accumulator design transition momentum, and since the above process is rare, it is required to cross transition efficiently (> 90%) with 30 mA of beam. In the past, transition crossing efficiency has been intensity-dependent, with never more than 10 mA getting through transition. At 8 mA or less, transition crossing efficiency was typically 100%. The beam loss is due to a large longitudinal beam blow-up which has been observed many times during transition crossing.

The wide temperature range of the reversible, lossy state of the new high-temperature superconductors in a magnetic field was recognized soon after their discovery. This behavior, which had gone virtually undetected in conventional superconductors, has generated considerable interest, both for a fundamental understanding of the HTS and because it degrades the performance of HTS for finite-field applications. We show that recently proposed explanation of this behavior for the highly-anisotropic high-temperature superconductors, as a dimensional crossover of the magnetic vortices, is strongly supported by recent experiments on a Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub x} single crystal using the high-Q mechanical oscillator techniques.

In photosynthetic reaction centers, a quinone molecule, Q{sub B}, is the terminal acceptor in light-induced electron transfer. The crystal structure of the reaction center implicates the protonatable amiho acid residues L212Glu and L213Asp in the binding of Q{sub B} to the reaction center and in proton transfer to the anionic forms of Q{sub B} generated by electron transfer from Q{sub A}. Here we report the construction of the double mutant L212Ala-L213Ala by site-specific mutagenesis, and the isolation and preliminary biophysical characterization of revertant and suppressor strains that have regained the ability to grow under photosynthetic conditions. Our results show that neither L212Glu nor L213Asp is essential for efficient light-induced electron or proton transfer in Rhodobacter capsulatus and that second-site mutations, located within the QB binding pocket or at a more distant site, can compensate for mutations at L212 and L213. Acquisition of a single negatively charged residue (at position L213, or on the other side of the binding pocket at position L225) or loss of a positively charged residue (at position M231) is sufficient to restore activity to the complex.

This Interim Report summarizes the findings of our first twenty in-depth interviews in the Advanced Nuclear Reactor Public Opinion Project. We interviewed 6 industry trade association officials, 3 industry attorneys, 6 environmentalists/nuclear critics, 3 state officials, and 3 independent analysts. In addition, we have had numerous shorter discussions with various individuals concerned about nuclear power. The report is organized into the four categories proposed at our April, 1991, Advisory Group meeting: safety, cost-benefit analysis, science education, and communications. Within each category, some change of focus from that of the Advisory Group has been required, to reflect the findings of our interviews. This report limits itself to describing our findings. An accompanying memo draws some tentative conclusions.

This Interim Report summarizes the findings of our first twenty in-depth interviews in the Advanced Nuclear Reactor Public Opinion Project. We interviewed 6 industry trade association officials, 3 industry attorneys, 6 environmentalists/nuclear critics, 3 state officials, and 3 independent analysts. In addition, we have had numerous shorter discussions with various individuals concerned about nuclear power. The report is organized into the four categories proposed at our April, 1991, Advisory Group meeting: safety, cost-benefit analysis, science education, and communications. Within each category, some change of focus from that of the Advisory Group has been required, to reflect the findings of our interviews. This report limits itself to describing our findings. An accompanying memo draws some tentative conclusions.

The argon excluder is designed to reduce the media density of the dead space between the internal modules of the end calorimeters and the concave convex head to less than that of argon. The design of the excluder includes a thin circular stainless steel plate welded to the inner side of the convex pressure vessel head at a radius of 26 and 15/16 inches. It is estimated that this plate will experience a pressure differential of approximately 40 pounds per square inch. A inner foam core is incorporated into the design of the excluder as structural support. This engineering note outlines the compression data for the foam used in the north end calorimeter argon excluder. Four test samples of approximately the same dimensions were cut and machined from large blocks of the poured foam. Two of these test samples were then subjected to varying compression magnitudes until failure. For this test failure was taken to mean plastic yielding or the point at which deformation increases without a corresponding increase in loading. The third sample was subjected to a constant compressive stress for an extended period of time, to identify any 'creeping' effects. Finally, the fourth sample was cooled to cryogenic …

The material covered in this report is divided into two parts: further cyclization experiments on 1,4-diethyl-2-[(2'- methoxyphenyl)thio]benzene and its sulfone both by chemical and photochemical means, and progress toward synthesis of modified target molecule, 9-isopropyl-4-methoxy-6-methyldibenzo-thiophene. 8 refs, figs.

The material covered in this report is divided into two parts: further cyclization experiments on 1,4-diethyl-2-[(2`- methoxyphenyl)thio]benzene and its sulfone both by chemical and photochemical means, and progress toward synthesis of modified target molecule, 9-isopropyl-4-methoxy-6-methyldibenzo-thiophene. 8 refs, figs.

Westinghouse Savannah River Company (WSRC) has established a configuration management (CM) plan to execute the SRS CM Policy and the requirements of the DOE Order 4700.1. The Reactor Restart Division (RRD) has developed its CM Plan under the SRS CM Program and is implementing it via the RRD CM Program Plan and the Integrated Action Plan. The purpose of the RRD CM program is to improve those processes which are essential to the safe and efficient operation of SRS production reactors. This document provides details of this plan.

Westinghouse Savannah River Company (WSRC) has established a configuration management (CM) plan to execute the SRS CM Policy and the requirements of the DOE Order 4700.1. The Reactor Restart Division (RRD) has developed its CM Plan under the SRS CM Program and is implementing it via the RRD CM Program Plan and the Integrated Action Plan. The purpose of the RRD CM program is to improve those processes which are essential to the safe and efficient operation of SRS production reactors. This document provides details of this plan.

Our research program is devoted to understanding the dynamics of elementary ionic collisions at the level of the underlying potential surface by measuring energy and angular distributions of reactively scattered products with crossed beam methods over the relative center-of-mass energy range from 0.3 to several eV. We have performed reactive and non-reactive scattering studies on the proton and hydrogen atom transfer systems listed below: O + NH{sub 3} {yields} OH + NH{sub 2} {delta}H = {minus}0.2 eV O + H{sub 2}O {yields} OH + OH {delta}H = +0.4 eV. In both of these systems, the reactions are hypothesized to occur on potential energy surfaces having two minima. The first minimum corresponds to the formation of an electrostatically bound complex, e.g., O(H{sub 2}O), followed by an intramolecular hydrogen atom/proton transfer to yield OH{center dot}OH, which may then form the products by cleavage of the complex.

Our research program is devoted to understanding the dynamics of elementary ionic collisions at the level of the underlying potential surface by measuring energy and angular distributions of reactively scattered products with crossed beam methods over the relative center-of-mass energy range from 0.3 to several eV. We have performed reactive and non-reactive scattering studies on the proton and hydrogen atom transfer systems listed below: O + NH{sub 3} {yields} OH + NH{sub 2} {delta}H = {minus}0.2 eV O + H{sub 2}O {yields} OH + OH {delta}H = +0.4 eV. In both of these systems, the reactions are hypothesized to occur on potential energy surfaces having two minima. The first minimum corresponds to the formation of an electrostatically bound complex, e.g., O(H{sub 2}O), followed by an intramolecular hydrogen atom/proton transfer to yield OH{center_dot}OH, which may then form the products by cleavage of the complex.

A realistic'' model for the time evolution of the SSC luminosity is given. The SDC instrumentation and physics strategy should be informed by this profile. 1 ref.

The objectives of this study are to establish the mechanisms and rates of basic steps in coal conversion processes, to integrate and incorporate this information into comprehensive computer models for coal conversion processes, to evaluate these models and to apply them to gasification, mild gasification and combustion in heat engines. (VC)

The objectives of this study are to establish the mechanisms and rates of basic steps in coal conversion processes, to integrate and incorporate this information into comprehensive computer models for coal conversion processes, to evaluate these models and to apply them to gasification, mild gasification and combustion in heat engines. (VC)

The Portsmouth Gaseous Diffusion Plant Security and Police Operations Department is responsible for protecting the US Department of Energy interests at the Portsmouth Plant from theft, sabotage, and other hostile acts that may adversely affect national security, the public health and safety, or property at the Department of Energy facility. This audit's purpose was to evaluate Martin Marietta Energy Systems, Inc.'s staff management at the Portsmouth Plant Security Department. The Portsmouth Plant Security Department could reduce operating cost up to an estimated $4.4 million over 5 years by: (1) Eliminating up to 14 unnecessary staff positions, and (2) reducing the length of relief breaks. These economies could be realized through implementing written operating procedures and negotiating removal of certain labor union restrictions. 2 tabs.

This report describes recent changes in U.S. burdensharing relationships with NATO, Japan and South Korea and, in the process, identifies some implications for U.S. foreign policy.

During the seventh quarter, water pretreatment experiments were done at lower pressures (1000 psig), with early H{sub 2}O injection or continuous H{sub 2}O injection, and with demineralized coals. In addition, a set of blank experiments was done with all four coals in helium at the following conditions: 350{degrees}C; 4000 psig; 20 minutes. An additional experiment was done with the Zap lignite at atmospheric pressure. Helium was used instead of nitrogen since it can be obtained in highly pure grades. The purpose of the blank experiments is to determine how much of the water pretreatment process is a thermal and/or pressure effort. The residues from the standard water pretreatment experiments with Illinois and Pittsburgh coals were subjected to analysis by TG-FTIR, solvent extraction, solvent swelling, oxygen reactivity index and donor solvent liquefaction. The pyridine extractables were analyzed. With regard to liquefaction behavior, improvements in the yields of oils and toluene solubles are observed for selected Illinois and Pittsburgh coals at longer pretreatment times ({ge} 60 minutes).

During the seventh quarter, water pretreatment experiments were done at lower pressures (1000 psig), with early H{sub 2}O injection or continuous H{sub 2}O injection, and with demineralized coals. In addition, a set of blank experiments was done with all four coals in helium at the following conditions: 350{degrees}C; 4000 psig; 20 minutes. An additional experiment was done with the Zap lignite at atmospheric pressure. Helium was used instead of nitrogen since it can be obtained in highly pure grades. The purpose of the blank experiments is to determine how much of the water pretreatment process is a thermal and/or pressure effort. The residues from the standard water pretreatment experiments with Illinois and Pittsburgh coals were subjected to analysis by TG-FTIR, solvent extraction, solvent swelling, oxygen reactivity index and donor solvent liquefaction. The pyridine extractables were analyzed. With regard to liquefaction behavior, improvements in the yields of oils and toluene solubles are observed for selected Illinois and Pittsburgh coals at longer pretreatment times ({ge} 60 minutes).