This report provides: (1) a background on Overseas Private Investment Corporation (OPIC) origins and program operations; (2) discussion of the international development finance context; and (3) analysis of key issues for Congress related to OPIC.

Investigation of diamond turning on beryllium was made in anticipation of obtaining an optical finish. Although results of past experiences were poor, it was decided to continue diamond turning on beryllium beyond initial failures. By changing speed and using coolant, partial success was achieved. Tool wear was the major problem. Tests were made to establish and plot wear as a function of cutting speed and time. Slower speeds did cause lower wear rates, but at no time did wear reach an acceptable level. The machine, tools, and procedure used were chosen based on the results of preliminary attempts and on previous experience. It was unnecessary to use an air-bearing spindle because tool failure governed the best finish that could be expected. All tools of diamond composition, whether single crystal or polycrystalline, wore at unacceptable rates. Based on present technology, it must be concluded that beryllium cannot be feasibly diamond turned to achieve an optical finish. (22 fig.) (auth)

This report gives a history of the Architect of the Capitol (AOC) position and brief descriptions of past Architects.

The underlying goal of this project was to provide multi-disciplinary engineering training for graduate students in the area of internal combustion engines, specifically in direct injection compression ignition engines. The program was designed to educate highly qualified engineers and scientists that will seek to overcome technological barriers preventing the development and production of cost-effective high-efficiency vehicles for the US. market. Further, these highly qualified engineers and scientists will foster an educational process to train a future workforce of automotive engineering professionals who are knowledgeable about and have experience in developing and commercializing critical advanced automotive technologies. Eight objectives were defined to accomplish this goal: (1) Develop an interdisciplinary internal combustion engine curriculum emphasizing direct injected combustion ignited diesel engines. (2) Encourage and promote interdisciplinary interaction of the faculty. (3) Offer a Ph.D. degree in internal combustion engines based upon an interdisciplinary curriculum. (4) Promote strong interaction with industry, develop a sense of responsibility with industry and pursue a self sustaining program. (5) Establish collaborative arrangements and network universities active in internal combustion engine study. (6) Further Enhance a First Class educational facility. (7) Establish ''off-campus'' M.S. and Ph.D. engine programs of study at various industrial sites. (8) Extend and Enhance …

None

This report provides a brief overview of the European Union (EU), an economic and political partnership between 27 sovereign member states. The report describes the formation of the EU, the three main institutions of the EU, and the EU's relationship with the United States.

The primary goal for an ultraprecision turning machine is to have the capability to position precisely the cutting points of a tool along a defined contour with respect to the part. In order to accomplish this goal, the use of a stable-positional-reference system has become apparent. Several efforts have been made by representatives of the diamond-turning community to design such a needed reference system. Efforts made at Y-12 to design the needed system are reviewed.

The device reported is a simple, robust, low-cost device to sample fast analog signals and convert them into digital data. Goal is to utilize existingleCroy Front End developments and BNL previous efforts to: Extend the dynamic range from 8 to 9-10 bits; Extend the depth of memory; Lower the cost; and Increase availability to general research and industrial cornmunity.

This report discusses multiple challenges the government of Puerto Rico faces in the fall of 2015. Concerns regarding the sustainability of Puerto Rico's public finances have intensified over the past year, despite several measures taken by the island's government to reduce spending, increase revenues, and restructure its obligations. The Puerto Rican government outlined a medium-term strategy to address those challenges in a fiscal plan put forth in mid-September 2015.

This report discusses how the total debt of the federal government can increase, an historical overview of debt limits, and how the current economic slowdown has led to higher deficits and thereby a series of debt limit increases, as well as legislation related to these increases.

This document describes the proposed strategy for disposal of spent and failed melters from the tank waste treatment plant to be built by the Office of River Protection at the Hanford site in Washington. It describes program management activities, disposal and transportation systems, leachate management, permitting, and safety authorization basis approvals needed to execute the strategy.

This is a preliminary report on the investigation of the N.S. Savannah replacement fuel rod vibration amplitude when excited by water flowing parallel to the axis of the fuel rod. Methods of calculating the fuel rod frequency in air were verified by experiment. Work is continuing to establish the validity of methods of calculating natural frequencies in water and to confirm the correlation of flow induced vibration amplitude found in reference (1).

The TORE? Lance is a hand-held hydro transportation device with the ability to convey solids at pre-determined slurry concentrations over great distances. The TORE? Lance head generates a precessing vortex core to mobilize solids. Solids retrieval is accomplished using an eductor. The device contains no parts and requires pressurized fluid to operate the eductor and produce mobilization. Three configurations of TORE? Lance operation were evaluated for mobilization and eduction during these tests: compressed air, water, and an air and water mixture. These tests have shown that the TORE? Lance is a tool that can be used at Hanford for mobilization and retrieval of wastes. The system is versatile and can be configured for many types of applications. These studies showed that the diverse applications require unique solutions so care is recommended for TORE? Lance equipment selection for each application. The two components of the TORE? Lance are the precessing vortex for mobilizing and the eductor for retrieval. The precessing vortex is sensitive to fluid flow rate and pressure. In the hand-held unit these parameters are controlled both internally, by changing shim spacing, and externally by controlling the flow split between the eductor and the head. For in-tank applications out-of-tank control …

One of the least controversial provisions of the Energy Policy and Conservation Act of 1975 (P.L. 94-163) established corporate average fuel economy (CAFE) standards for new passenger cars. This report presents a brief background and analysis regarding the price of crude oil that brought into sharp focus the fuel inefficiency of U.S. automobiles. The report also discusses the previous issues and the most recent developments regarding CAFE.

None

OAK B262 Final Report DOE Grant No.: DE-FG03-01ER15263 ''Development of a toolbox of organic synthetic reactions that can be induced on individual molecules by STM'' Abstract Bommisetty V. Rao, Ki-Young Kwon, Robert Perry, Luke Nysen, Gregory Pavin, Qibin Zhang, Casey Dugger and Ludwig Bartels University of California at Riverside, Pierce Hall, Riverside, CA92521, email: Ludwig.Bartels@ucr.edu The key scientific objective of this project is the development of a set of reliable techniques for the addressal of specific bonds of individual molecules in order to assemble functional molecules on a metal surface at single-atom precision. Success in this direction will open up a conceptually novel route to single molecule chemistry, which can provide its products at any desired surface location without involving any lithographic steps at all. In the course of this project a number of halo-substituted aryls and alkyls where investigated with special concern to two properties: clean deposition of the reactants from the gas phase on metallic surfaces and STM-based addressability of individual substituents of them. In order to prevent contamination of the sample by deposition of solvent residue, a special depositions source was developed that uses a skimmed molecular beam. Exemplary substances studied were 1,3-iodobromobenzene (IBB), 3 bromopropionitrile (BPN) …

None

Technical report containing the general arrangement of the Low Intensity Training Reactor and outcomes of experiments that have been performed in the reactor to measure the rate of fission product heat dissipation from the fuel pieces after loss of water. [From Summary, Introduction]

This project provides the first demonstration of the application of proton deflectometry for the diagnosis of electromagnetic field topology and current-carrying regions in Z-pinch plasma experiments. Over the course of this project several milestones were achieved. High-energy proton beam generation was demonstrated on the short-pulse high-intensity Leopard laser, (10 Joules in ~350 femtoseconds, and the proton beam generation was shown to be reproducible. Next, protons were used to probe the electromagnetic field structure of short circuit loads in order to benchmark the two numerical codes, the resistive-magnetohydrodynamics (MHD) code, Gorgon, and the hybrid particle-in-cell code, LSP for the interpretation of results. Lastly, the proton deflectometry technique was used to map the magnetic field structure of pulsed-power-driven plasma loads including wires and supersonic jets formed with metallic foils. Good agreement between the modeling and experiments has been obtained. The demonstrated technique holds great promise to significantly improve the understanding of current flow and electromagnetic field topology in pulsed power driven high energy density plasmas. Proton probing with a high intensity laser was for the first time implemented in the presence of the harsh debris and x-ray producing z-pinch environment driven by a mega-ampere-scale pulsed-power machine. The intellectual merit of the program …

This report, after analyzing factors that have contributed to high gasoline prices, describes the major legislative initiatives and discusses the issues involved.

This report, after analyzing factors that have contributed to high gasoline prices, describes the major legislative initiatives and discusses the issues involved.

This report reviews the major legislative initiatives to deal with the gasoline price issue. To put these proposals in perspective, it first describes some of the factors that have led to the high prices of both crude oil and gasoline.

None

An in-tank ion exchange column, described here, has been constructed to operate in the waste tanks at the Savannah River Technology Center (SRTC). The purpose of the column is to remove dissolved mercury from laboratory wastes and capture them on Duolite{trademark} GT-73 resin. This paper summarizes the results of operation of such a column on two batches of waste in one high activity tank and on one batch of waste in a low activity tank for the purpose of removing mercury from the liquid wastes. Sufficient mercury decontamination was demonstrated with the in-tank resin removal system, after twenty four hours of operation in each tank, to render the waste nonhazardous and enable shipment to the F-Area evaporator.