The Filter Compartment (FC) in this analysis is a generic reactor airborne activity confinement filter compartment which possesses all the essential physical and mechanical properties of the Savannah River Site (SRS) confinement filters of Reactor Buildings K, L, and P. The filters belong to the Airborne Activity Confinement System (AACS). These filters absorb a significant amount of radioactive effluents from the exhausting air. The seismic excitation is input indirectly from the output of the seismic analysis of the 105 exhaust stack building in the form of floor response spectra. However, the 105 exhaust stack building was analyzed for seismic motions defined by free-field ground response spectra with a ZPA (Zero Period Acceleration) of 0.2G for all three orthogonal components of ground motion and a shape consistent with USNRC Regulatory Guide 1.60. Based upon equivalent dynamic analysis of the FC, DuPont engineers suggested modifications on the existing FC with heavy I-section beams (1). The scope of this phase I'' analysis, as requested by Seismic Engineering (2), is to carry out a scoping analysis'' of Frequency Analysis and Response Spectrum Analysis of the FC with DuPont suggested conceptual modifications. Our suggestion was that the existing FC without conceptual modifications be analyzed first. …

During the course of 9{degree} tapered side-bonding resistance upset weld development at Mound, various studies have been conducted to evaluate the effect of yield strength on welds in 304L stainless steel. The results of these studies have concluded that at high yield strengths there may be a minor reduction in the length of Class 2 or better bond. Satisfactory welds have been produced with materials having yield strengths ranging from 36.0 to 141.0 ksi. However, when body yield strengths exceed 80.0 ksi a minor decrease in bond lengths begins. A significant inverse relationship between stem yield strength and bond length was shown to exist. 8 refs., 9 figs., 10 tabs.

High surface electric fields have been obtained in the first tests of a superconducting rf quadrupole device. The rf quadrupole fields were generated between niobium vanes 6.5 cm in length, with an edge radius of 2 mm, and with a beam aperture of 6 mm diameter. In tests at 4.2 K, the 64 MHz device operated cw at peak surface electric fields of 128 MV/m. Virtually no electron loading was observed at fields below 100 MV/m. It was possible to operate at surface fields of 210 MV/m in pulses of 1 msec duration using a 2.5 kW rf source. For the vane geometry tested, more than 10 square centimeters of surface support a field greater than 90% of the peak field. The present result indicates that electric fields greater than 100 MV/m can be obtained over an appreciable area, sufficient for some accelerator applications. It also shows that superconducting rf technology may provide an extended range of options for rf quadrupole design. 7 refs., 4 figs.

Differential geometry provides a natural family of coordinate systems, the Frenet frame, in which to specify the geometric properties of magnet winding. By a modification of the Euler-Bernoulli thin rod model, the strain energy is defined with respect to this frame. Then it is minimized by a direct method from the calculus of variations. The mathematics, its implementation in a computer program, and some analysis of an SSC dipole by the program will be described. 16 refs.

Interest in interactive 3-D graphics has exploded of late, fueled by (a) the allure of using scientific visualization to go where no-one has gone before'' and (b) by the development of new input devices which overcome some of the limitations imposed in the past by technology, yet which may be ill-suited to the kinds of interaction required by researchers active in scientific visualization. To resolve this tension, we propose a flat 5-D'' environment in which 2-D graphics are augmented by exploiting multiple human sensory modalities using cheap, conventional hardware readily available with personal computers and workstations. We discuss how interactions basic to 3-D scientific visualization, like searching a solution space and comparing two such spaces, are effectively carried out in our environment. Finally, we describe 3DMOVE, an experimental microworld we have implemented to test out some of our ideas. 40 refs., 4 figs.

The objective of this project is to investigate three possible routes to the formation of ethers, in particular methyl tert-butyl (MTBE), during slurry phase Fischer-Tropsch reaction. The three reaction schemes to be investigated are: addition of i-butylene during the formation of methanol and/or higher alcohols directly from CO and H[sub 2] during slurry-phase Fischer-Tropsch; addition of i-butylene to FT liquid products including alcohols in a slurry-phase reactor containing an MTBE or other acid catalyst; and addition of methanol to slurry phase FT synthesis making iso-olefins. During the seventh quarter we continued the shake down experiments for the SBCR and conducted an initial aborted run. We have also re-started experiments on Scheme 1, i.e., the addition of iso-butylene during CO hydrogenation. Using a dual bed arrangement, we have demonstrated the synthesis of MTBE from syngas and iso-butylene.

Objective is to understand dynamics of elementary ionic collisions at the level of the underlying potential surface by measuring energy and angular distributions of reactively scattered products with crossed beam methods over the relative center-of-mass energy range from 0.3 to several eV. During the past few years, emphasis was on reaction dynamics of anionic species important in combustion, with special emphasis on O{sup {minus}} in proton and hydrogen atom transfer reactions with NH{sub 3}, H{sub 2}O, HF, and CH{sub 4}.

Sintered bars of Y-Ba-Cu oxide were partially melted using a quartz halogen lamp zone heating apparatus. The resulting multiphase samples showed varying degrees of melt texturing.'' It was found that the addition of YBa{sub 2}CuO{sub 5} powders to the sintered YBa{sub 2}Cu{sub 3}O{sub 7} prior to the zone melting process enhanced the growth of large textured grains. The best value of the critical current density was {approximately}10{sup 3} A/cm{sup 2} at 1.0 T and 77 K for the starting composition of YBa{sub 2}Cu{sub 3}O{sub 7} {sm bullet} (0.2)Y{sub 2}BaCuO{sub 5}. 11 refs., 5 figs.

This investigation is concerned with the separation of gas mixtures using a novel concept of rapid pressure swing absorption (RAPSAB) of gas in a stationary absorbent liquid through gas-liquid interfaces immobilized in the pore mouths of hydrophobic microporous membranes. The process is implemented in a module well-packed with hydrophobic microporous hollow fiber membranes. Before we proceed to RAPSAB studies with reactive absorbents, it is necessary to make an effort to compare experimental results with those predicted by the models. The only model developed so far involved a type of RAPSAB cycle (Mode 3) for which limited data were acquired earlier. A number of experiments have, therefore, been conducted in this mode to characterize the absorption part of the cycle. A new and more compact module (Module No. 5) was made using 840 fibers and a teflon casing inside the stainless steel shell to exactly define the fiber packing density. This allows an exact calculation of Happel's free surface radius. Experiments were carried out using a CO[sub 2]-N[sub 2] mixture of around 10% CO[sub 2] and balanced N[sub 2] using both modules 4 and 5 over a wide range of absorption times.

The remnant magnetic flux distribution in a single crystal and a sintered polycrystal was examined using the magnetic particle decoration technique. The single crystal, which was heavily twinned, showed only local order in the flux lattice. This was probably due to lattice distortions caused by interaction between twin boundaries and fluxons. In the polycrystal, flux pinning effectiveness was seen to vary significantly between grains, depending on size and orientation. Grains with the c axis nearly perpendicular to the applied magnetic field were most effective at pinning flux. Some features of the decoration patterns implied that the flux distribution was influenced by more than just the grains at the sample surface. 7 refs., 6 figs.

The traveler served as a member of the two-man US Nuclear Regulatory Commission sponsored team who visited the Prometey Complex in Leningrad to assess the potential for expanded cooperative research concerning integrity of the primary pressure boundary in commercial light-water reactors. The emphasis was on irradiation embrittlement, structural analysis, and fracture mechanics research for reactor pressure vessels. At the irradiation seminar in Cologne, presentations were made by German, French, Finnish, Russian, and US delegations concerning many aspects of irradiation of pressure vessel steels. The traveler made presentations on mechanisms of irradiation embrittlement and on important aspects of the Heavy-Section Steel Irradiation Program results of irradiated fracture mechanics tests.

Transient electrical potentials can be generated in plasmas by utilizing impulsive mirror-generated forces acting on the plasma electrons together with ion inertia to cause momentary charge imbalance. In the Mirrortron such potentials are generated by applying a rapidly rising (tens of nanoseconds) localized mirror field to the central region of a hot-electron plasma confined between static mirrors. Because of the loss-cone nature of the electron distribution the sudden appearance of the pulsed mirror tends to expel electrons, whereas the ion density remains nearly constant. The quasi-neutrality condition then operates to create an electrical potential the equipotential surfaces of which can be shown theoretically to be congruent with surfaces of constant B. An alternative way of generating transient potentials is to apply a pulse of high-power microwaves to a plasma residing on a magnetic field with a longitudinal gradient. This technique resembles one employed in the Pleiade experiments. At gigawatt power levels, such as those produced by a Free Electron Laser, the production of very high transient potentials is predicted. Fusion-relevant applications of these ideas include heavy-ion drivers for inertial fusion, and the possibility of employing these techniques to enhance the longitudinal confinement of fusion plasmas in multiple-mirror systems. 23 refs., …

A numerical theory for the massively parallel lattice gas and lattice Boltzmann methods for computing solutions to nonlinear advective-diffusive systems is introduced. The convergence theory is based on consistency and stability arguments that are supported by the discrete Chapman-Enskog expansion (for consistency) and conditions of monotonicity (in establishing stability). The theory is applied to four lattice methods: Two of the methods are for some two-dimensional nonlinear diffusion equations. One of the methods is for the one-dimensional lattice method for the one-dimensional viscous Burgers equation. And one of the methods is for a two-dimensional nonlinear advection-diffusion equation. Convergence is formally proven in the L{sub 1}-norm for the first three methods, revealing that they are second-order, conservative, conditionally monotone finite difference methods. Computational results which support the theory for lattice methods are presented. In addition, a domain decomposition strategy using mesh refinement techniques is presented for lattice gas and lattice Boltzmann methods. The strategy allows concentration of computational resources on regions of high activity. Computational evidence is reported for the strategy applied to the lattice gas method for the one-dimensional viscous Burgers equation. 72 refs., 19 figs., 28 tabs.

Differential-algebraic equation (DAE) boundary value problems arise in a variety of applications, including optimal control and parameter estimation for constrained systems. In this paper we survey these applications and explore some of the difficulties associated with solving the resulting DAE systems. For finite difference methods, the need to maintain stability in the differential part of the system often necessitates the use of methods based on symmetric discretizations. However, these methods can suffer from instability and loss of accuracy when applied to certain DAE systems. We describe a new class of methods, Projected Implicit Runge-Kutta Methods, which overcomes these difficulties. We give convergence and stability results, and present numerical experiments which illustrate the effectiveness of the new methods. 20 refs., 1 tab.

The objective of this research is to develop a mechanistic understanding of the oxidation of coal and coal pyrite, and to correlate the intrinsic physical and chemical properties of these minerals, along with changes resulting from oxidation, with those surface properties that influence the behavior in physical coal cleaning processes. The results will provide fundamental insight into oxidation, in terms of the bulk and surface chemistry, the microstructure, and the semiconductor properties of the pyrite. During the fourth quarter, characterization and oxidation tests were done on Upper Freeport coal from the Troutville {number sign}2 Mine, Clearfield County, Pennsylvania. In addition, standard test methods for characterizing pyrite-bearing materials were studied. 3 figs., 2 tabs.

The author was one of 26 invited lecturers to discuss the latest developments of the physical aspects of electrochemistry. He interacted extensively with other lecturers and many participants from developing countries. He also visited with the Director of the Italian Synchrotron Radiation Source now under construction in Trieste, Italy.

In the analysis of magnetic flux creep experiments it is assumed that, at a given temperature, the pinning energy which must be overcome by thermal activation depends on the magnetic induction and its gradient by U(B,{nabla}B){congruent} U{sub p}(B)(1-{nabla}B/{nabla}B{sub max}){sup n} where U{sub p} is the pinning well depth and {nabla}B{sub max} corresponds to the critical current density with no thermal activation. Customarily, n is assumed to be unity and any unusual temperature dependence of U{sub p} is then ascribed to a distribution of well depths. However, realistic assumptions about the shape of the pinning potential yield 3/2 {approx lt} n {approx lt} 2, which yields an apparent distribution of well depths in the conventional analysis. Simple models will be used to illustrate the characteristics of these two quite different origins for the apparent temperature dependence of well depth obtained from magnetic flux creep rates. 13 refs., 8 figs.

The objective of this project is to investigate three possible routes to the formation of ethers, in particular methyl tert-butyl (MTBE), during slurry phase Fischer-Tropsch reaction. The three reaction schemes to be investigated are: addition of i-butylene during the formation of methanol and/or higher alcohols directly from CO and H{sub 2} during slurry-phase Fischer-Tropsch; addition of i-butylene to FT liquid products including alcohols in a slurry-phase reactor containing an MTBE or other acid catalyst; and addition of methanol to slurry phase FT synthesis making iso-olefins. During the seventh quarter we continued the shake down experiments for the SBCR and conducted an initial aborted run. We have also re-started experiments on Scheme 1, i.e., the addition of iso-butylene during CO hydrogenation. Using a dual bed arrangement, we have demonstrated the synthesis of MTBE from syngas and iso-butylene.

This plan, which is required by US Department of Energy (DOE) Order 5400. 1, provides waste minimization and pollution prevention guidance for all Hanford Site contractors. The plan is primary in a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan, Prime contractor implementation plans, and the Hanford Site Guide for Preparing and Maintaining Generator Group Pollution Prevention Program Documentation (DOE-RL, 1997a) describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and 3005(h) (RCRA and EPA, 1994). Items discussed include the pollution prevention policy and regulatory background, organizational structure, the major objectives and goals of Hanford Site`s pollution prevention program, and an itemized description of the Hanford Site pollution prevention program. The document also includes US Department of Energy, Richland Operations Office`s (RL`s) statement of policy on pollution prevention as well as a listing of regulatory drivers that require a pollution prevention program.

In order to treat the mixed radioactive and hazardous waste stored in 177 underground tanks, the Tank Waste Remediation System (TWRS) program is developing a `demonstration` site for treatment and immobilization of these wastes by a private contractor. Project W-519 is providing the infrastructure support to this site by developing the designs and emplacing required pipelines, roads, electrical, etc. In support of the TWRS Phase 1 Infrastructure Project (W-519) Characterization, Numatec Hanford Corporation (NHC) contracted with Waste Management Federal Services, Inc., Northwest Operations (WMNW) to investigate a number of locations in and just outside the 200 East Area eastern fenceline boundary. These areas consisted of known or suspected waste lines or waste sites that could potentially impact the construction and emplacement of the proposed facility improvements, including waterlines and roads. These sites were all located subsurface and sugaring would be required to obtain sample material from the desired depth. The soils would then be sampled and submitted to the laboratory for analysis of radioactivity.

The object of this paper discusses the design review of the boron carbide safety rod for the Westinghouse Savannah River Company. This paper reviewed information presented by personnel of the Savannah River Laboratory (SRL) Equipment Engineering Section, SRL Materials Technology Section and Reactor Materials Engineering and Technology. From this report, views, opinions and recommendations were made on the safety rod from materials testing to production.

The Filter Compartment (FC) in this analysis is a generic reactor airborne activity confinement filter compartment which possesses all the essential physical and mechanical properties of the Savannah River Site (SRS) confinement filters of Reactor Buildings K, L, and P. The filters belong to the Airborne Activity Confinement System (AACS). These filters absorb a significant amount of radioactive effluents from the exhausting air. The seismic excitation is input indirectly from the output of the seismic analysis of the 105 exhaust stack building in the form of floor response spectra. However, the 105 exhaust stack building was analyzed for seismic motions defined by free-field ground response spectra with a ZPA (Zero Period Acceleration) of 0.2G for all three orthogonal components of ground motion and a shape consistent with USNRC Regulatory Guide 1.60. Based upon equivalent dynamic analysis of the FC, DuPont engineers suggested modifications on the existing FC with heavy I-section beams [1]. The scope of this ``phase I`` analysis, as requested by Seismic Engineering [2], is to carry out a ``scoping analysis`` of Frequency Analysis and Response Spectrum Analysis of the FC with DuPont suggested conceptual modifications. Our suggestion was that the existing FC without conceptual modifications be analyzed first. …

None

A new heterotic N = 2 string with manifest target space supersymmetry is constructed by combining a conventional N = 2 string in the right-moving sector and a Green-Schwarz-Berkovits type string in the left-moving sector. The corresponding sigma model is then obtained by turning on background fields for the massless excitations. We compute the beta functions and we partially check the OPE's of the superconformal algebra perturbatively in {alpha}{prime}, all in superspace. The resulting field equations describe N = 1 self-dual supergravity.