In this study, we address a series of fundamental questions regarding the processes and effectiveness of geologic CO{sub 2} sequestration in saline aquifers. We begin with the broadest: what is the ultimate fate of CO{sub 2} injected into these environments? Once injected, it is immediately subject to two sets of competing processes: migration processes and sequestration processes. In terms of migration, the CO{sub 2} moves by volumetric displacement of formation waters, with which it is largely immiscible; by gravity segregation, which causes the immiscible CO{sub 2} plume to rise owing to its relatively low density; and by viscous fingering, owing to its relatively low viscosity. In terms of sequestration, some fraction of the rising plume will dissolve into formation waters (solubility trapping); some fraction may react with formation minerals to precipitate carbonates (mineral trapping); and the remaining portion eventually reaches the cap rock, where it migrates up-dip, potentially accumulating in local topographic highs (structural trapping). Although this concept of competing migration/sequestration processes is intuitively obvious, identifying those sub-processes that dominate the competition is by no means straightforward. Hence, at present there are large uncertainties associated with the ultimate fate of injected CO{sub 2} (Figure 1). Principal among these: can a …

This paper reviews the physics and applications of Normal-Insulator-Superconductor (NIS) tunnel junctions. The current-voltage properties of NIS junctions are diode-like with a strong temperature dependence. Hence, these structures can be used as sensitive thermometers at temperatures well below the energy gap, {Delta}, of the superconducting electrode. For junction voltages comparable to {Delta}/q, current flow removes energy from the normal electrode. This property has been exploited to build refrigerators capable of cooling thin-film circuits from 0.3 K to 0.1 K. Calorimeters and bolometers for the detection of X-rays and millimeter-wave radiation, respectively, have successfully been built from NIS junctions. NIS junctions have also been used to probe the superconducting state. Finally, recent ideas for the use of NIS junctions as simple circuit elements are described.

The Regulatory Data Quality Objectives (DQO) Supporting Tank Waste Remediation System Privatization Project (Wiemers et al. 1998a) was prepared to address the regulatory data needs for waste currently stored in double-shell and single-shell tanks that was generated by the U.S. Department of Energy (DOE) and its predecessors. In the Regulatory DQO, 125 organic compounds and 48 inorganic constituents were identified as priority regulated constituents requiring additional tank waste characterization.

This report documents tests that were conducted to verify that the air monitoring system for the Cold Vacuum Drying Facility ventilation exhaust stack meets the applicable regulatory criteria regarding the placement of the air sampling probe, sample transport, and stack flow measurement accuracy.

An assessment of long-term performance of Category 3 waste-enclosing cement grouts requires data about the leachability/diffusion of radionuclide species (iodine-129, technetium-99, and uranium) when the waste forms come in contact with groundwater. Leachability data were collected by conducting dynamic (ANS-16.1) and static leach tests on radionuclide-containing cement specimens. The diffusivity of radionuclides in soil and concrete media was collected by conducting soil-soil and concrete-soil half-cell experiments.

The purpose of this catalog is to integrate all available soil physics data and information from vadose zone characterization and performance assessments into one useable, scientifically defensible document.

Metals have been identified as contaminants of concern for the Hanford Reach because of upriver mining, industrial activities, and past nuclear material production at the US Department of Energy's Hanford Site. This study was undertaken to better understand the occurrence and fate of metals in sediment disposition areas in the Columbia and Snake Rivers.

We conduct a comparative experimental analysis of three well known media access protocols: 802.11, CSMA, and MACA for wireless radio networks. Both fixed and ad-hoc networks are considered. The experimental analysis was carried out using GloMoSim: a tool for simulating wireless networks. The main focus of experiments was to study how (i) the size of the network, (ii) number of open connections, (iii) the spatial location of individual connections, (iv) speed with which individual nodes move and (v) protocols higher up in the protocol stack (e,g. routing layer) affect the performance of the media access sublayer protocols. The performance of the protocols was measured w.r.t. three important parameters: (1) number of received packets, (2) average latency of each packet, and (3) throughput. The following general qualitative conclusions were obtained; some of the conclusions reinforce the earlier claims by other researchers. (1) Although 802.11 performs better than the other two protocols with respect to fairness of transmission, packets dropped, and latency, its performance is found to (i) show a lot of variance with changing input parameters and (ii) the overall performance still leaves a lot of room for improvement. (2) CSMA does not perform too well under the fairness criteria, however, …

The purpose of this study was to determine the protection factor of the Lepestok-200 filtering facepiece respirator by conducting a standard quantitative fit test on a panel of 25 representative adults (14 males and 11 females) using the TSI Incorporated PortaCount PlusTM quantitative fit-testing system. Each subject was tested four times. In the total of 100 tests, 95% of the overall fit factors were greater than 3, more than 80% of the overall fit factors were greater than 14, approximately 50% were greater than 86, and 20% were greater than 200. The pass-fail performance of the respirator was similar for each of the six exercises in the test series: (1) normal breathing, (2) deep breathing, (3) moving the head side to side, (4) moving the head up and down, (5) reading a passage of text out loud, and (6) normal breathing, indicating that the respirator performs equally well for each type of exercise. A significant and sustained improvement in fit factor was observed after the initial test, indicating that the subjects benefited from the knowledge gained in the first of the four quantitative fit tests. In the 75 tests conducted after the initial test for each individual, 95% of the …

The purpose of this report is to provide a methodology for an increase in the efficiency and a decrease in the cost of vitrifying high-level waste (HLW) by optimizing HLW glass formulation. This methodology consists in collecting and generating a database of glass properties that determine HLW glass processability and acceptability and relating these properties to glass composition. The report explains how the property-composition models are developed, fitted to data, used for glass formulation optimization, and continuously updated in response to changes in HLW composition estimates and changes in glass processing technology. Further, the report reviews the glass property-composition literature data and presents their preliminary critical evaluation and screening. Finally the report provides interim property-composition models for melt viscosity, for liquidus temperature (with spinel and zircon primary crystalline phases), and for the product consistency test normalized releases of B, Na, and Li. Models were fitted to a subset of the screened database deemed most relevant for the current HLW composition region.

Vortec Corporation, the United States Enrichment Corporation (USEC) and DOE/Paducah propose to complete the technology demonstration and the implementation of the Material Handling System developed under Contract Number DE-AC21-92MC29120. The demonstration testing and operational implementation will be done at the Paducah Gaseous Diffusion Plant. The scope of work, schedule and cost for the activities are included in this proposal. A description of the facility to be constructed and tested is provided in Exhibit 1, attached. The USEC proposal for implementation at Paducah is presented in Exhibit 2, and the commitment letters from the site are included in Exhibit 3. Under our agreements with USEC, Bechtel Jacobs Corporation and DOE/Paducah, Vortec will be responsible for the construction of the demonstration facility as documented in the engineering design package submitted under Phase 4 of this contract on August 9, 2001. USEC will have responsibility for the demonstration testing and commercial implementation of the plant. The demonstration testing and initial commercial implementation of the technology will be achieved by means of a USEC work authorization task with the Bechtel Jacobs Corporation. The initial processing activities will include the processing of approximately 4,250 drums of LLW. Subsequent processing of LLW and TSCA/LLW will be …

This guide takes the science manager through the steps of planning, implementing, validating, communicating, and using case studies. It outlines the major methods of analysis, describing their relative merits and applicability while providing relevant examples and sources of additional information. Well-designed case studies can provide a combination of rich qualitative and quantitative information, offering valuable insights into the nature, outputs, and longer-term impacts of the research. An objective, systematic, and credible approach to the evaluation of U.S. Department of Energy Office of Science programs adds value to the research process and is the subject of this guide.

It has been empirically observed that the dependence of J/{psi} and {psi}{prime} production on nuclear mass number A is very similar. This has been postulated to be due to the predominance of color octet pre-resonant states in charmonium production and absorption. Two new experiments, NA60 at CERN and HERA-B at DESY, will measure the {chi}{sub c} A dependence for the first time. These measurements should shed new light on the charmonium production and absorption mechanisms.

The objective and scope of this calculation is to create the appropriate parameter input for MING 1.0 (CSCI 30018 V1.0, CRWMS M&O 1998b) that will allow the testing of the results from the MING software code with both scientific measurements of microbial populations at the site and laboratory and with natural analogs to the site. This set of calculations provides results that will be used in model validation for the ''In-Drift Microbial Communities'' model (CRWMS M&O 2000) which is part of the Engineered Barrier System Department (EBS) process modeling effort that eventually will feed future Total System Performance Assessment (TSPA) models. This calculation is being produced to replace MING model validation output that is effected by the supersession of DTN MO9909SPAMING1.003 using its replacement DTN MO0106SPAIDM01.034 so that the calculations currently found in the ''In-Drift Microbial Communities'' AMR (CRWMS M&O 2000) will be brought up to date. This set of calculations replaces the calculations contained in sections 6.7.2, 6.7.3 and Attachment I of CRWMS M&O (2000) As all of these calculations are created explicitly for model validation, the data qualification status of all inputs can be considered corroborative in accordance with AP-3.15Q. This work activity has been evaluated in accordance …

Lighting design involves the consideration of multiple performance criteria, from the earliest stages of conceptual design, through various stages of controls and operation in a project's life cycle. These criteria include: (1) the quantitative analysis of illuminance and luminance distribution due to daylighting and electric lighting; (2) qualitative analysis of the lighting design with photometrically accurate renderings of the designed environment; (3) analysis of energy implications of daylighting and electric lighting design and operation;, and (4) analysis of control strategies and sensor placement for maximizing energy savings from lighting control while providing visual comfort. In this paper we describe the development of an integrated decision-making environment that brings together several different tools, and provides the data management and process control required for a multi-criterion support of the design and operation of daylighting and electric lighting systems. The result is a powerful design and decision-making environment to meet the diverse and evolving needs of lighting designers and operators.

The interaction region (IR) magnets for the proposed very large hadron collider (VLHC) require high gradient quadrupoles and high field dipoles for high luminosity performance. Moreover, the IR magnets for high energy colliders and storage rings must operate in an environment where the amount of energy deposited on superconducting coils is rather large. In the case of doublet IR optics with flat beams, the design of the first 2-in-1 quadrupole defines the geometry and pole tip field in this and other IR magnets. This paper will present a novel design of this magnet that allows a very small separation between the two apertures. A brief discussion of the conceptual magnetic design of this and other magnets for interaction regions is given. The influence of critical current density in superconductor (a higher value of which is most beneficial to high performance IR magnet design) is also discussed. Since High Temperature Superconductors (HTS) retain most of their critical current density at high fields and at elevated temperatures, they offer an attractive possibility for the IR magnet designs of future colliders or upgrades of present colliders.

The Fe-16 at. (8.5 wt) % Al alloy, known as FAPY, has been identified as a superior material for heating element applications. However, while the 15-lb heats melted at the Oak Ridge National Laboratory (ORNL) could be processed into wire, the large heat melted at Hoskins Manufacturing Company (Hoskins) could not be processed under commercial processing conditions. The primary objective of the Cooperative Research and Development Agreement (CRADA) was to demonstrate that wire of the FAPY alloy could be produced under commercial conditions from air-induction-melted (AIM) heats. The specific aspects of this CRADA included: (1) Melting 15-lb heats by AIM or vacuum-induction melting (VIM) at ORNL. (2) Development of detailed processing steps including warm drawing and annealing temperature and time during cold-drawing steps. (3) Melting of 1400-lb heats at Hoskins by the Exo-Melt{trademark} process and their chemical analysis and microstructural characterization. (4) Development of tensile properties of sections of ingots from the large heats in the ascast, hot-worked, and hot- and cold-worked conditions. (5) Microstructural characterization of cast and wrought structures and the fractured specimens. (6) Successful demonstration of processing of AIM heats at Hoskins to heating element wire. The aspects of this CRADA listed above have demonstrated that the …

Data on ground-water levels, discharges, and withdrawals from a variety of ground-water sources in the study area are reported for calendar year 1999.

The subsurface radioactive disposal site located at the Idaho National Engineering and Environmental Laboratory contains neutron-activated metals from nonfuel nuclear-reactor- core components. A long-term corrosion test is being conducted to obtain site-specific corrosion rates to support efforts to more accurately estimate the transfer of activated elements in an arid vadose zone environment. The tests use nonradioactive metal coupons representing the prominent neutron-activated material buried at the disposal location, namely, Type 304L stainless steel, Type 315L stainless steel, nickel-chromium alloy (UNS NO7718), beryllium, aluminum 6061-T6, and a zirconium alloy, (UNS R60804). In addition, carbon steel (the material presently used in the cask disposal liners and other disposal containers) and a duplex stainless steel (UNS S32550) (the proposed material for the high- integrity disposal containers) are also included in the test program. This paper briefly describes the test program and presents the early corrosion rate results after 1 year and 3 years of underground exposure.

For the Neutrino Factory and Muon Collider Collaboration, BNL has considered solenoidal magnet systems of several types to capture pions generated by bombarding a mercury jet with multi-GeV protons. The magnet systems generate up to 20 T, uniform to 5% throughout a cylindrical volume 0.15 m in diameter and 0.6 m long. Axially downstream the field ramps gradually downward by a factor of sixteen, while the bore increases fourfold. The steady-state system needed for an accelerator has many superconducting coils and a radiation-resistant insert of mineral-insulated hollow conductor. Less costly, pulsed systems suffice to study pion capture and the effect of a magnetic field on a jet hit by a proton beam. BNL has explored three types of magnets, each with its principal coils precooled by liquid nitrogen. One type employs two sets of coils energized sequentially. Charged in 23 s by a power supply of 5 MVA, the 16ton outer set generates 10 T and stores 28 MJ, from which, in 1/3 s, to charge a half-ton inner coil that adds 12 1/2 T to the 7 1/2 T remaining from the outer set. An alternative design uses 25 MVA to energize, in 1.4 s, a single 3-ton set …

This report describes a novel approach developed at the Oak Ridge National Laboratory (ORNL) for the estimation of the uncertainty in the prediction of the neutron multiplication factor for spent nuclear fuel. This technique focuses on burnup credit, where credit is taken in criticality safety analysis for the reduced reactivity of fuel irradiated in and discharged from a reactor. Validation methods for burnup credit have attempted to separate the uncertainty associated with isotopic prediction methods from that of criticality eigenvalue calculations. Biases and uncertainties obtained in each step are combined additively. This approach, while conservative, can be excessive because of a physical assumptions employed. This report describes a statistical approach based on Monte Carlo sampling to directly estimate the total uncertainty in eigenvalue calculations resulting from uncertainties in isotopic predictions. The results can also be used to demonstrate the relative conservatism and statistical confidence associated with the method of additively combining uncertainties. This report does not make definitive conclusions on the magnitude of biases and uncertainties associated with isotopic predictions in a burnup credit analysis. These terms will vary depending on system design and the set of isotopic measurements used as a basis for estimating isotopic variances. Instead, the report …

Steamboat Envirosystems, LLC (SELC) was awarded a grant in accordance with the DOE Enhanced Geothermal Systems Project Development. Atlas-Copco Rotoflow (ACR), a radial expansion turbine manufacturer, was responsible for the manufacturing of the turbine and the creation of the new computer program. SB Geo, Inc. (SBG), the facility operator, monitored and assisted ACR's activities as well as provided installation and startup assistance. The primary scope of the project is the redesign of an axial flow turbine to a radial inflow turboexpander to provide increased efficiency and reliability at an existing facility. In addition to the increased efficiency and reliability, the redesign includes an improved reduction gear design, and improved shaft seal design, and upgraded control system and a greater flexibility of application

High Temperature Superconductors (HTS) have the potential to change the design and operation of future particle accelerators beginning with the design of high performance interaction regions. HTS offers two distinct advantages over conventional Low Temperature Superconductors (LTS)--they retain a large fraction of their current carrying capacity (a) at high fields and (b) at elevated temperatures. The Superconducting Magnet Division at Brookhaven National Laboratory (BNL) has embarked on a new R&D program for developing technology needed for building accelerator magnets with HTS. We have adopted a ''React & Wind'' approach to deal with the challenges associated with the demanding requirements of the reaction process. We have developed several ''conductor friendly'' designs to deal with the challenges associated with the brittle nature of HTS. We have instituted a rapid turn around program to understand and to develop this new technology in an experimental fashion. Several R&D coils and magnets with HTS tapes and ''Rutherford'' cables have been built and tested. We have recently performed field quality measurements to investigate issues related to the persistent currents. In this paper, we report the results to date and plans and possibilities for the future.

Data on ground-water levels, discharges, and withdrawals from a variety of ground-water sources in the study area are reported for calendar year 1998.