Calculations are presented for two shots in the W7AS stellarator which differ only in the magnitude of the current in the divertor control coil, but have very different values of experimentally attainable β (<β> ≈ 2.7% versus <β> ≈ 1.8%). Equilibrium calculations find that a region of chaotic magnetic field line trajectories fills approximately the outer 1/3 of the cross-section in each of these configurations. The field lines in the stochastic region are calculated to behave as if the flux surfaces are broken only locally near the outer midplane and are preserved elsewhere. The calculated magnetic field line diffusion coefficients in the stochastic regions for the two shots are consistent with the observed differences in the attainable β, and are also consistent with the differences in the reconstructed pressure profiles.

This report was prepared to evaluate the compliance of CTFM to DOE Order 6430.1A. This document presents the results of an evaluation that was performed to assess compliance of the K West (KW) Cask Transportation Facility Modifications (CTFM) designs against applicable requirements of Department of Energy (DOE) Order 6430.1 A, General Design Criteria. This evaluation was grouped under two categories described as Cask Loadout System (CLS) and Cranes/Other Modifications.

The original purpose of this award was to use low&#8208;energy electron microscopy (LEEM) to explore the dynamics of surfaces of clean single crystal surfaces when driven by a beam of energetic ions. The goal was to understand the nanoscience of hyperthermal growth, surface erosion by sublimation and irradiation, operation of surface sinks in irradiated materials, diffusion on driven surfaces, and the creation of structural patterns. This project was based on a novel LEEM system constructed by C. P. Flynn, which provided real&#8208;time imaging of surface dynamics by scattering low energy electrons. With the passing of Prof. Flynn in late 2011, this project was completed under a slightly different scope by constructing a low&#8208;energy, inelastic electron scattering (�EELS�) instrument. Consistent with Flynn�s original objectives for his LEEM system, this device probes the dynamics of crystal surfaces. However the measurements are not carried out in real time, but instead are done in the frequency domain, through the energy lost from the probe electrons. The purpose of this device is to study the collective bosonic excitations in a variety of materials, including high temperature superconductors, topological insulators, carbon allotropes including (but not limited to) graphene, etc. The ultimate goal here is to identify …

Federal regulations and Rockwell Hanford Operations (Rockwell) planning documents require that radioactive waste sites disposed in-place be permanently marked. A number of technical studies have addressed the materials to be used for permanent markers as well as the design configurations. Criteria and standards for markers have also been prepared and issued in draft form. The next step in marker development requires laboratory and field testing of prototype markers. This document provides design specifications for the first generation surface and subsurface markers. At the conclusion of testing activities, definitive specifications can be prepared. Included herein are specifications for marker placement, marker materials, marker configuration and dimensions and marker messages. This document presents specifications only and does not provide rationale or justification for the specifications. Such rationale and justification is available in referenced documents.

An accidental release of gaseous fission products from an ORR fused salt capsule, containing 26 mg. of U/sup 235/, was postulated and the resuiting hazard estimated by calculating the maximum external and internal dose an individual could receive from exposure to the gaseous fission products and their decay products. Assuming all the contained gaseous fission produets are released, the resulting external and internal dosc, to organs other than the thyroid, arc insignificant. The dose to the thyroid by radioiodine is considered to be significant. By retaining at least 90% of the iodine isotopes in the experiment system through use of an iodine trap, a large reduction in both the external whole body and internal thyroid doses may be achieved. Therefore, assuming an iodine trap is utilized, it appears that the consequences of am accidental gaseous fission product release from an ORR fused salt capsule experiment would not be serious. (auth)

Automatic control of fine coal cleaning circuits has traditionally been limited by the lack of sensors for on-line ash analysis. Although several nuclear-based analyzers are available, none have seen widespread acceptance. This is largely due to the fact that nuclear sensors are expensive and tend to be influenced by changes in seam type and pyrite content. Recently, researchers at VPI&SU have developed an optical sensor for phosphate analysis. The sensor uses image processing technology to analyze video images of phosphate ore. It is currently being used by Texasgulf for off-line analysis of dry flotation concentrates. The primary advantages of optical sensors over nuclear sensors are that they are significantly cheaper, are not subject to measurement variations due to changes in high atomic number minerals, are inherently safer and require no special radiation permitting. Purpose of this work is to apply the knowledge gained in the development of an optical phosphate analyzer to the development of an on-line ash analyzer for fine coal slurries. During the past quarter, tests were performed on two prototype sample presentation systems for the optical analyzer. Preliminary results indicate that the flow of slurry past the camera lens is too consistent to provide reliable results. A …

The holographic stressmeter is an instrument which has been developed at Caltech to allow determination of the complete stress tensor from in situ borehole measurements. The stressmeter uses double-exposure holographic interferometry to record the displacements induced by the drilling of a small sidehole into the borehole wall. The local stresses, which are the result of the far-field stresses, concentrated at the borehole, cause deformation of the surface of the borehole wall in the vicinity of the sidehole. The first part of this study uses a thin infinite elastic plate subjected to plane stress at infinity to model the displacements at the borehole wall. However, the existence of some holograms which were difficult to model closely led us to examine the validity of this model. In order to investigate the problem further, we performed a two-dimensional finite element analysis for an elastic box with a terminated hole. We varied the dimensions of the hole to see what effect the radius and depth of the hole might have on the displacements. The plate model predicts that the depth of the hole should have no effect on the horizontal components of displacement, but the finite element results show that the magnitude of both …

The holographic stressmeter is an instrument which has been developed at Caltech to allow determination of the complete stress tensor from in situ borehole measurements. The stressmeter uses double-exposure holographic interferometry to record the displacements induced by the drilling of a small sidehole into the borehole wall. The local stresses, which are the result of the far-field stresses, concentrated at the borehole, cause deformation of the surface of the borehole wall in the vicinity of the sidehole. The first part of this study uses a thin infinite elastic plate subjected to plane stress at infinity to model the displacements at the borehole wall. However, the existence of some holograms which were difficult to model closely led us to examine the validity of this model. In order to investigate the problem further, we performed a two-dimensional finite element analysis for an elastic box with a terminated hole. We varied the dimensions of the hole to see what effect the radius and depth of the hole might have on the displacements. The plate model predicts that the depth of the hole should have no effect on the horizontal components of displacement, but the finite element results show that the magnitude of both …

''Intelligent Extruder'' described in this report is a software system and associated support services for monitoring and control of compounding extruders to improve material quality, reduce waste and energy use, with minimal addition of new sensors or changes to the factory floor system components. Emphasis is on process improvements to the mixing, melting and de-volatilization of base resins, fillers, pigments, fire retardants and other additives in the :finishing'' stage of high value added engineering polymer materials. While GE Plastics materials were used for experimental studies throughout the program, the concepts and principles are broadly applicable to other manufacturers materials. The project involved a joint collaboration among GE Global Research, GE Industrial Systems and Coperion Werner & Pleiderer, USA, a major manufacturer of compounding equipment. Scope of the program included development of a algorithms for monitoring process material viscosity without rheological sensors or generating waste streams, a novel detection scheme for rapid detection of process upsets and an adaptive feedback control system to compensate for process upsets where at line adjustments are feasible. Software algorithms were implemented and tested on a laboratory scale extruder (50 lb/hr) at GE Global Research and data from a production scale system (2000 lb/hr) at GE …

This report presents a summary of testing the affinity of titanosilicates (TSP), germanium-substituted titanosilicates (Ge-TSP) and multiwall carbon nanotubes (MWCNT) for lanthanide ions in dilute nitric acid solution. The K-TSP ion exchanger exhibited the highest affinity for lanthanides in dilute nitric acid solutions. The Ge-TSP ion exchanger shows promise as a material with high affinity, but additional tests are needed to confirm the preliminary results. The MWCNT exhibited much lower affinities than the K-TSP in dilute nitric acid solutions. However, the MWCNT are much more chemically stable to concentrated nitric acid solutions and, therefore, may candidates for ion exchange in more concentrated nitric acid solutions. This technical report serves as the deliverable documenting completion of the FY13 research milestone, M4FT-13SR0303061 – measure actinide and lanthanide distribution values in nitric acid solutions with sodium and potassium titanosilicate materials.

X-ray absorption imaging experiments and measurements of inflow and outflow distribution provide quantitative and vistial evidence for capillary diversion around a drift and a drift-shadow effect. Test cells were constructed from volcanic tuff with either in-plane (one fracture parallel to the face of the test cell) or multi-fracture (with a grid of fractures perpendicular to the test cell) systems. Tracer solutions were dripped in the fractures at ports along the top of the test cell. Discharge along the bottom boundary and in the drift was monitored. Variables included flow rate and fracture aperture. X-ray absorption imaging allowed for visualization of flow paths through the system. Evidence for capillary diversion and drift shadow include: (1) very small (&lt; 1 %,of inflow in most cases) measured discharge into the drift, (2) discharge less than expected under the drift and discharge greater than expected just beyond the drift, and (3) visualization of the tracer-solution flow path from above the drift, around the drift, and shedding beyond the drift. However, tracer was also observed in a natural fracture under the drift in one system. It is unclear whether these high concentrations are due to diversion around the drift and back under the drift or …

None

None

None

None

None

None

None

Aluminum-doped zinc oxide, ZnO:Al or AZO, is a well-known n-type transparent conducting oxide with great potential in a number of applications currently dominated by indium tin oxide (ITO). In this study, the optical and electrical properties of AZO thin films deposited on glass and silicon by pulsed filtered cathodic arc deposition are systematically studied. In contrast to magnetron sputtering, this technique does not produce energetic negative ions, and therefore ion damage can be minimized. The quality of the AZO films strongly depends on the growth temperature while only marginal improvements are obtained with post-deposition annealing. The best films, grown at a temperature of about 200?C, have resistivities in the low to mid 10-4 Omega cm range with a transmittance better than 85percent in the visible part of the spectrum. It is remarkable that relatively good films of small thickness (60 nm) can be fabricated using this method.

Presented by Dr. Dan E. Arvizu at the American Institute of Chemical Engineers (AIChE) 2007 Spring National Meeting on April 24, 2007 in Houston, Texas.

We report on a study of the decay {bar B}{sup 0} {yields} D*{sup +}{omega}{pi}{sup -} with the BABAR detector at the PEP-II B-factory at the Stanford Linear Accelerator Center. Based on a sample of 232 million B{bar B} decays, we measure the branching fraction {Beta}({bar B}{sup 0} {yields} D*{sup +}{omega}{pi}{sup -}) = (2.88 {+-} 0.21(stat.) {+-} 0.31(syst.)) x 10{sup -3}. We study the invariant mass spectrum of the {omega}{pi}{sup -} system in this decay. This spectrum is in good agreement with expectations based on factorization and the measured spectrum in {tau}{sup -} {yields} {omega}{pi}{sup -} {nu}{sub {tau}}. We also measure the polarization of the D*{sup +} as a function of the {omega}{pi}{sup -} mass. In the mass region 1.1 to 1.9 GeV we measure the fraction of longitudinal polarization of the D*{sup +} to be {Lambda}{sub L}/{Lambda} = 0.654 {+-} 0.042(stat.) {+-} 0.016(syst.). This is in agreement with the expectations from heavy-quark effective theory and factorization assuming that the decay proceeds as {bar B}{sup 0} {yields} D*{sup +}{rho}(1450), {rho}(1450) {yields} {omega}{pi}{sup -}.

The characterization of laser-produced plasmas has required the application of spectroscopic techniques to non-standard conditions where kinetics models have not been extensively tested. The plasmas are produced by the Nova laser for the study of inertial confinement fusion, can be mm in size, and evolve on sub-nanosecond time scales. These targets typically achieve electron temperatures from 2-4 keV and electron densities of 10{sup 20}-10{sup 22} cm{sup {minus}3}. The authors have measured the electron temperature of two types of targets: bags of gas and hohlraums, Au cylinders with laser entrance holes in the flat ends. By comparing data from different targets, they examine the time-dependence of spectroscopic plasma diagnostics.

Eight wells of the LFW series monitor groundwater quality in the Steed Pond Aquifer (Water Table) beneath the Interim Sanitary Landfill at the Savannah River Site (SRS). These wells are sampled biannually to comply with the South Carolina Department of Health and Environmental Control Modified Municipal Solid Waste Permit 025500- 1120 (formerly DWP-087A) and as part of the SRS Groundwater Monitoring Program. Trichlorofluoromethane was elevated in one downgradient and one sidegradient well during 1995. Barium, 1, 1- dichloroethylene, specific conductance, and zinc exceeded standards in one well each. The elevated level of 1, 1-dichloroethylene occurred in a downgradient well. The groundwater flow direction in the Steed Pond Aquifer (Water Table) beneath the Sanitary Landfill was to the southeast (universal transverse Mercator coordinates). The flow rate in this unit was approximately 190 ft/year during first quarter 1995 and 150 ft/yr during third quarter 1995.

An analytic basis for the limit on intra-media thermal radiation transport has been obtained as a simple function of temperature and material optical properties (n,k). It is shown that optical parameters determine the maximum radiative energy transfer rate by altering media radiative state density and energy density. Quantitative analysis shows that intra-media radiative transfer rates may exceed the radiation into free space as described by the Stephan-Boltzmann equation by several orders of magnitude. The frequency dependence of the optical properties further alters the expected blackbody spectral dependence. This generalized formulation of the limit to thermal radiation transfer in terms of media optical properties expands the understanding and future potential of radiative processes.