From introduction: "The present paper deals with a classical calculation in which some of the meson effects can be included to all orders in the meson-nucleon coupling coupling constant, in particular those having to do with the gyration of the nucleon spin and isotopic spin. Such a treatment leads to results qualitatively different from the weak coupling calculations."

Abstract: "The results of the investigation of three methods of obtaining transverse stability in linear accelerators for ions are presented and discussed. For electric or magnetic quadrupole focusing the range of stable operation, oscillation amplitudes, and the operation of an actual grid is analyzed from measurements of the field distribution. Finally, the formulas applicable to focusing by axial magnetic lenses are presented."

Report discussing the properties of a plasma held in a steady state by a magnetic field. Properties such as "electric and magnetic fields, current density, particle density, and macroscopic velocity" are determined analytically by assuming uniform temperature throughout the plasma.

Introduction: A proposal for using an energetic neutral deuteron beam for injection into a mirror machine has been made by Eugene Lauer. This report describes an experimental attempt to produce a large neutral deuteron beam. The beam from the NTA ion source was passed through a target of hydrogen gas where the charge exchange mechanics produced a beam of energetic neutral deuterium atoms.

From abstract: " This report describes the construction of a plasma source that projects deuterium and titanium ions and eletrons at speeds up to 2 x 10^7 cm/sec."

Abstract: "The deuterium plasma which is ejected by a 6000-ampere pulsed current through a rail-type spark source has a yield in the forward direction which is a factor of 5 to 10 greater than that in the perpendicular direction. This effect is believed to be due to the magnetic propulsion of the plasma."

Abstract: An investigation of ionization by shock waves in hydrogen has been initiated. The shock waves are produced in a 1-inch diameter glass pipe by a high-voltage spark at one end. Variables which will influence attainment of the maximum degree of ionization and ion temperature are described. Spectroscopic methods of measuring ion density and temperature are outlined, and improvements in the design of the shock tube are discussed.

Thesis discussing the study of deuterons produced at wide angles to a beam of 300 Mev neutrons and a beam of 300 Mev protons. It was observed that the deuterons are formed by "a two step process in which the incident nucleon, or its collision partner, is scattered and then picks up in the same nucleus." Some tritons are also observed, and it is thought that they are formed by the same process as the deuterons. From these findings, the author concludes that "for heavy nuclei, there is a nuclear skin rich in neutrons."

The following report describes the Astron Thermonuclear Program initiated at Livermore, California in 1957.

A crystallographic study of the transition element beryllides was undertaken in support of phase diagram work. These beryllides are very high melting, and the use of ordinary methods make it difficult to determine stoichiometry. We have succeeded in establishing the compositions and complete crystal structure description of all of the room temperature stable or metastable compounds of the beryllides of niobium, tantalum, titanium zirconium, hafnium, vanadium, chromium and molybdenum. Since some of the structures found were not previously reported, complete structure determinations had to be done.

Abstract. The peacetime application of nuclear explosives to the conservation and development of our national water resources is, at this time, of sufficient promise to present some of the possibilities publicly. In nuclear explosives man has at his disposal and service, a powerful source of energy - a new tool - that we believe can be utilized safely to excavate channels and lake basins, or to create conduits of broken permeable material and underground reservoirs. In surveying the possible applications of nuclear explosives, the following ideas are among those worthy of serious consideration: (a) the use of nuclear explosives for the economic movement of large volumes of earth in the construction of earth fill dames, (b) the use of nuclear explosives for the diversion of a stream from a river system, whose flow is largely lost to the sea, into another stream channel leading to an arid section or a closed basin, (c) the use of nuclear explosives to create a recharge basin or a conduit to a subsurface aquifer for fresh water recharge, and (d) the use of nuclear explosives to create off-channel reservoirs for the elimination of saline waters through recharge to a mineralized aquifer and by evaporation.

This summary of the research progress meeting on June 24, 1948 discusses the following topics: (1) Spectrographic analysis of alpha active materials (J. Conway); and (2) Range energy determinations (Dr. R.L. Thornton, Mr. Walter Stephan and Mr. Walter Aron).

In programming the sequence of events in the operational cycle of the bevatron, certain devices must be triggered at specific values of magnetic field strength in the gap. It is desirable that the time-jitter, which corresponds to field jitter, of the tirggering pulses be small. In the synchrotron this is done with peaking strips which are located in the fringing field of the gap.

In an effort to gain information on the nature of the photon-meson and photon-nucleon interaction, a study of the artificial production of mesons by photons has been made at the Berkeley synchrotron. The major effort of this research was concentrated on a measurement of the energy and angular distribution of u+-mesons produced when the photons strike a target of liquid hydrogen. Detection of the mesons is accomplished electronically by the technique of delayed coincidence.

Recent underground nuclear tests conducted by the U.S. Atomic Energy Commission have yielded data on the effects of contained nuclear explosions in four rock mediums: tuff, alluvium, rock salt, and granite. This report presents and compares data obtained primarily through exploratory mining and drilling into the postshot environment of 35 such events.

In any underground nuclear explosion, the shock front that propagates from the shot point carries with it energy from the explosion, and distributes this energy by doing work on the surrounding material. In the process, the material undergoes changes in both its physical and mechanical states. If enough energy is deposited in the material, it will vaporize or melt thus changing its physical state, or cause it to crush or crack. During the past few years, special computer codes have been developed for predicting the close-in phenomena of underground nuclear explosions using the laws of physics, and the knowledge of the properties of the materials in which the detonations occur. As a consequence, a better understanding of experimental observations and measurements has evolved.

The effects of explosion-induced ground motion must be evaluated in planning and executing any nuclear excavation project. For some projects ground use intensity may dictate the use of less-than-optimum yields to minimize damaging effects. In remote areas, weighing the alternatives of outright purchase of some property or use of smaller yields may be required. The cost of indemnifying owners against damage must be considered in any case. Discussions of the effects of ground motion on three broad types of facilities - engineered structures, residential buildings, and equipment required for the support of nuclear excavation operations - are presented. A method of predicting the response of single- and multi-storied buildings, the response spectrum technique, is discussed, with emphasis on the application of explosion-induced spectra.

The kinetic energies of pions from radioactive decays in propane have been determined by using the information given by the angles of the secondary particles. This method is independent of any range-energy relation.

Individual Samarkand wildtype D. melanogaster males were permitted to choose between either two white-eyed or two red-eyed females or between a red-eyed and a white-eyed female. Observations of the flies were made over a period of about two hours and premating periods, intermating periods and the durations of copulations were recorded.

This scaler was designed to replace an obsolescent tube design that was in general use at Lawrence Radiation Laboratory in Livermore. The new design, using solid state devices and printed circuit modules, allows two complete scalers in one frame to occupy the same rack space as the tube design. Switches in the input circuits of the new scaler change input impedance and sensitivity for operation with either tube or transistor circuits. The use of transistors has greatly increased reliability, and has also reduced power by a factor of fifteen. Modular construction of all circuits, including the power supply, minimizes down time since all modules are replaceable without removing the scaler from its rack. Reliability, then cost, were the criteria dictating choice of components and circuits in the scaler design.

It has been shown that the time of burst of exploding wires can be predicted from known thermodynamic and electrical properties of the wire materials under some conditions. The mathematical relationships are a set of integrals (transformation time integrals) similar in form to the empirical "action integrals" sometimes used in exploding wire work. This paper discusses the use of the transformation time integrals to calculate the resistance and temperature of a wire as a function of time up to the time of burst and to investigate the effects of environment of the wire on the temperature, resistance, and time of burst.

In this study, a physical-numerical model is used to investigate processes important for cratering, or excavation, physics for high-explosive sources in desert alluvium. High explosives do not vaporize much of the geological environment surrounding the initial cavity containing the explosive. Thus, a relatively simple, and in some cases a well-known, equation of state exists for the high-explosive cavity gas for pressure greater than 1 atmosphere. However, nuclear explosives are known to vaporize a great deal of surrounding geological environment during the early part of cavity life history. This vaporized material is believed to condense late in the life history of the cavity, and prior to vent of the cavity gas to the atmosphere, such that the latent heat of condensation plays an important role in nuclear excavation. So far, no numerical-physical models of the response of a geologic environment to a nuclear explosive includes the effect of condensation on the hydrodynamics of late times. Thus, the calculation of the cavity pressure at late times including the effect of condensation is one of the current unsolved problems in the calculation of a crater formed by nuclear explosives. This study, then, develops a predictive, numerical-physical model for H.E. sources of the cavity …

The production of energy by nuclear reactions results in the production of radioactive nuclei. Therefore, in considering the possible utilization of nuclear explosives for peaceful purposes it is necessary to be able to predict the expected activities, their amounts, and dispositions. The amounts and kinds of radioactivities produced by detonation of a nuclear explosive are dependent upon the specific design of the explosive. The behavior and ultimate fate of the activities produced by the explosion depend on the composition of the medium in which the detonation occurs, the nature of the detonation, and the chemical species involved.

In November 1952 an event took place which was to have a profound effect on political alignments of the world. This event was the detonation of "Mike", the first large thermonuclear device. The political implications of this experiment overshadowed what has come to be a major advance in the development of scientific tools; the experimentally verified, extremely high thermal neutron flux observed in Mike. Subsequent to this observation, the Atomic Energy Commission established a study program to investigate this particular characteristic of nuclear devices. Under the program, Los Alamos Scientific Laboratory and Lawrence Radiation Laboratory, Livermore, have studied the mechanisms of high fluxes, capture systematics, general stability characteristics, and more specifically, nuclear design to accomplish this massive neutron irradiation. Utilization of these greatly increased fluxes can be expected to significantly advance understanding in many fields.