Student newspaper of the University of Oklahoma in Norman, Oklahoma that includes national, local, and campus news along with advertising.

The design, growth by metal-organic chemical vapor deposition, and processing of an In{sub 0.07}Ga{sub 0.93}As{sub 0.98}N{sub 0.02} solar Al, with 1.0 ev bandgap, lattice matched to GaAs is described. The hole diffusion length in annealed, n-type InGaAsN is 0.6-0.8 pm, and solar cell internal quantum efficiencies > 70% arc obwined. Optical studies indicate that defects or impurities, from InGAsN doping and nitrogen incorporation, limit solar cell performance.

A reaction mechanism has been developed that describes the gas-phas 0971 and surface reactions involved in the chemical vapor deposition of Si from chlorosilanes. Good agreement with deposition rate data from a single wafer reactor with no wafer rotation has been attained over a range of gas mixtures, total flow rates, and reactor temperatures.

We developed a model for the probabilistic behavior of a rechargeable battery acting as the energy storage component in a photovoltaic power supply system. Stochastic and deterministic models are created to simulate the behavior of the system component;. The components are the solar resource, the photovoltaic power supply system, the rechargeable battery, and a load. Artificial neural networks are incorporated into the model of the rechargeable battery to simulate damage that occurs during deep discharge cycles. The equations governing system behavior are combined into one set and solved simultaneously in the Monte Carlo framework to evaluate the probabilistic character of measures of battery behavior.

The production of high-brightness particle beams calls for the development of advanced beam diagnostics. High brightness beams, meaning beams with a high density in phase space, are important for many applications, such as short-wavelength Free-Electron Lasers and advanced accelerator systems. A diagnostic that provides detailed information on the density distribution of the electron bunch in multi-dimensional phase-space is an essential tool for obtaining small emittance at a high charge. This diagnostic system has been developed at Brookhaven National Laboratory. One component of the system is the measurement of a slice emittance which provides a measurement of transverse beam properties (such as emittance) as a function of the longitudinal position. Changing the laser pulse profile of a photocathode RF gun has been suggested as one way to achieve non-linear emittance compensation and improve the brightness and that can be diagnosed by the slice emittance system. The other element of the diagnostic is the tomographic reconstruction of the transverse phase. In our work we give special attention to the accuracy of the phase space reconstruction and present an analysis using a transport line with nine focusing magnets and techniques to control the optical functions and phases. This high precision phase space tomography …

The production of high-brightness particle beams calls for the development of advanced beam diagnostics. High brightness beams, meaning beams with a high density in phase space, are important for many applications, such as short-wavelength Free-Electron Lasers and advanced accelerator systems. A diagnostic that provides detailed information on the density distribution of the electron bunch in multi-dimensional phase-space is an essential tool for obtaining small emittance at a high charge. This diagnostic system has been developed at Brookhaven National Laboratory. One component of the system is the measurement of a slice emittance which provides a measurement of transverse beam properties (such as emittance) as a function of the longitudinal position. Changing the laser pulse profile of a photocathode RF gun has been suggested as one way to achieve non-linear emittance compensation and improve the brightness and that can be diagnosed by the slice emittance system. The other element of the diagnostic is the tomographic reconstruction of the transverse phase. In our work we give special attention to the accuracy of the phase space reconstruction and present an analysis using a transport line with nine focusing magnets and techniques to control the optical functions and phases. This high precision phase space tomography …

Weekly newspaper from Harper, Texas that includes local, state, and national news along with advertising.

First-principles density-functional calculations are used to study metal adsorption (Li, K, Y, Nb, Ru, Pd, Pt, Cu, Ag, Au, and Al at 1/3-4 monolayer coverages) atop 5 ~ A1203 films on Al(Ill). The oxide-metal bond is ionic at Iow coverages but, with interesting exceptions, caused by polari@i ,~-cE!vED at high coverages where the overlayer is metallic. Binding trends are explained in terms of s'imp e concepts. Increasing overlayer thickness can cause the adsorbate-oxide interface structure to than . %lEc o ~ 1998 and while some metals wet, most do not.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Chickasha, Oklahoma that includes local, state, and national news along with advertising.

By accurately measuring the angle of reflection of a laser beam incident on a reflective surface with a position sensitive detector, changes in the surface normal direction (slope of the surface) can be determined directly. An instrument has been built that makes repeated measurements over the surface, and uses this data to produce a grayscale image of the slope. The resolution of this system to changes in the surface normal direction is found to be better than 0.01 degrees. By focusing the Iaser beam to achieve a lateral resolution of 5 pm, the resolvable surface height change due to a variation in slope is estimated to be <1 nm.

The objective of the CRADA was to cooperate in the development of a moldable transient suppression polymer composite that can be used to protect electrical equipment and electronics from damage caused by electrical disturbances and faults. The composite was to provide a solid- state means of fault current limitation, particularly for high-current applications. The composite was envisioned to have the following properties: (1) be moldable and therefore suited to the automated manufacture at a low cost; (2) operate with greater speed and reliability than electromechanical devices; and (3) operate in conjunction with appropriately designated mechanical breakers to limit the current and energy under short-circuit fault conditions, thereby providing improved protection to equipment connected to the circuit. The technical work of the project was in part shared between Lockheed Martin and the General Electric Company and in part divided between the participants according to their capabilities. Work was performed in the Oak Ridge K-25, Y-12, and X-10 facilities of Lockheed Martin and at the General Electric Company Corporate Research and Development (GE-CR&D) and Electrical Distribution and Control (GE-ED&C) facilities. Materials were fabricated in facilities of the Y-12 Development. Department, where polymers were filled with varying amounts of conductive materials. However, as …

Semiweekly newspaper from Boerne, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

In the 106th Congress, no comprehensive activity on reauthorizing the Clean Water Act occurred, although a number of individual clean water bills were enacted. Other issues have been debated recently, such as reforming the law to provide regulatory relief for industry, states and cities, and individual landowners. The debate over many of these issues highlights differing views of the Act and its implementation by some who seek to strengthen existing requirements and others who believe that costs and benefits should be more carefully weighed before additional control programs are mandated.

SolMaT works with manufacturers to lower the cost of manufacturing components for concentrating solar power systems.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

A series of experiments were conducted in fiscal year 1998 at the Pacific Northwest National Laboratory as part of the Immobilized Low-Activity Waste-Performance Assessment. These experiments evaluated the sorption and transport of uranium, U(VI), under conditions of partial moisture saturation that are relevant to arid region burial sites and vadose-zone far-field conditions at the Hanford Site. The focus was on measuring breakthrough curves (from which distribution coefficient [K{sub d}] values can be calculated) for U(W) in three Hanford Site sediments that represent different texture classes in two unsaturated moisture conditions. Previous research showed that K{sub d} values measured during transport in unsaturated sediments varied with moisture saturation.

The Oak Ridge National Laboratory (OWL) Refinery Yield Model (RYM) has been used to estimate the demand for ethanol in U.S. gasoline production in year 2010. Study cases examine ethanol demand with variations in world oil price, cost of competing oxygenate, ethanol value, and gasoline specifications. For combined-regions outside California summer ethanol demand is dominated by conventional gasoline (CG) because the premised share of reformulated gasoline (RFG) production is relatively low and because CG offers greater flexibility for blending high vapor pressure components like ethanol. Vapor pressure advantages disappear for winter CG, but total ethanol used in winter RFG remains low because of the low RFG production share. In California, relatively less ethanol is used in CG because the RFG production share is very high. During the winter in California, there is a significant increase in use of ethanol in RFG, as ethanol displaces lower-vapor-pressure ethers. Estimated U.S. ethanol demand is a function of the refiner value of ethanol. For example, ethanol demand for reference conditions in year 2010 is 2 billion gallons per year (BGY) at a refiner value of $1.00 per gallon (1996 dollars), and 9 BGY at a refiner value of $0.60 per gallon. Ethanol demand could …

Weekly newspaper from Emory, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Sapulpa, Oklahoma that includes local, state, and national news along with advertising.

We have used the Interracial Force Microscope" to perform nanoindentations on Au single- crystal surfaces. We have observed two distinct regimes of plastic deformation which are distinguished by the magnitude of discontinuities in load relaxation. At lower stresses, relaxation occurs in small deviations from elastic behavior, while at the higher stresses they take the form of large load drops often resulting in complete relaxation of the applied load. These major events create a relatively wide plastic zone that subsequently deepens more rapidly than it widens. We discuss these findings in terms of contrasting models of dislocation processes in the two regimes.

A mathematical model of a spirally wound lithium/thionyl chloride primary battery has been developed ~d used for parameter estimation and design studies. The model formulation is based on the fimdarnental Consemation laws using porous electrode theory and concentrated solution theory. The model is used to estimate the difision coefficient and the kinetic parameters for the reactions at the anode and the cathode as a function of temperature. These parameters are obtained by fitting the simulated capacity and average cell voltage to experimental data over a wide range of temperatures (-55 to 49"C) and discharge loads (10 to 250 ohms). The experiments were performed on D-sized, cathode-limited, spirally wound lithium/thionyl chloride cells. The model is also used to study the effkct of cathode thickness on the cell capacity as a finction of temperature, and it was found that the optimum thickness for the cathode- limited design is temperature and load dependent.

This document contains the agenda and meeting notes. Topics of discussion included US Pu disposition ceramics activities, Russian experience and proposals in Pu ceramics, and development of possible Russian ceramic proposals or collaborations.