The authors present measurements of the semileptonic decays B{sup -} {yields} D{sup 0} {tau}{sup -} {bar {nu}}{sub {tau}}, B{sup -} {yields} D*{sup 0} {tau}{sup -}{bar {nu}}{sub {tau}}, {bar B}{sup 0} {yields} D{sup +} {tau}{sup -} {bar {nu}}{sub {tau}}, and {bar B}{sup 0} {yields} D*{sup +} {tau}{sup -}{bar {nu}}{sub {tau}}, which are sensitive to non-Standard Model amplitudes in certain scenarios. The data sample consists of 232 x 10{sup 6} {Upsilon}(4S) {yields} B{bar B} decays collected with the BABAR detector at the PEP-II e{sup +}e{sup -} collider. They select events with a D or D* meson and a light lepton ({ell} = e or {mu}) recoiling against a fully reconstructed B meson. They perform a fit to the joint distribution of lepton momentum and missing mass squared to distinguish signal B {yields} D{sup (*)}{tau}{sup -} {bar {nu}}{sub {tau}} ({tau}{sup -} {yields} {ell}{sup -} {bar {nu}}{sub {ell}}{nu}{sub {tau}}) events from the backgrounds, predominantly B {yields} D{sup (*)} {ell}{sup -}{bar {nu}}{sub {ell}}. They measure the branching-fraction ratios R(D) {triple_bond} {Beta}(B {yields} D{tau}{sup -} {bar {nu}}{sub {tau}})/{Beta}(B {yields} D{ell}{sup -} {bar {nu}}{sub {ell}}) and R(D*) {triple_bond} {Beta}(B {yields} D*{tau}{sup -} {bar {nu}}{sub {tau}})/{Beta}(B {yields} D* {ell}{sup -} {bar {nu}}{sub {ell}}) and, from a combined fit …

Metastable vacua in supersymmetric QCD in the presence of single and multitrace deformations of the superpotential are explored, with the aim of obtaining an acceptable phenomenology. The metastable vacua appear at one loop, have a broken R-symmetry, and a magnetic gauge group that is completely Higgsed. With only a single trace deformation, the adjoint fermions from the meson superfield are approximately massless at one loop, even though they are massive at tree level and R-symmetry is broken. Consequently, if charged under the standard model, they are unacceptably light. A multitrace quadratic deformation generates fermion masses proportional to the deformation parameter. Phenomenologically viable models of direct gauge mediation can then be obtained, and some of their features are discussed.

Simulated calorimeter performance in the SiD detector is examined. The software calibration procedures are described, as well as the perfect pattern recognition PFA reconstruction. Performance of the SiD calorimeters is summarized with jet energy resolutions from calorimetry only, perfect pattern recognition and the SiD PFA algorithm. Presented at LCWS08[1]. Our objective is to simulate the calorimeter performance of the SiD detector, with and without a Particle Flow Algorithm (PFA). Full Geant4 simulations using SLIC[2] and the SiD simplified detector geometry (SiD02) are used. In this geometry, the calorimeters are represented as layered cylinders. The EM calorimeter is Si/W, with 20 layers of 2.5mm W and 10 layers of 5mm W, segmented in 3.5 x 3.5mm{sup 2} cells. The HAD calorimeter is RPC/Fe, with 40 layers of 20mm Fe and a digital readout, segmented in 10 x 10mm{sup 2} cells. The barrel detectors are layered in radius, while the endcap detectors are layered in z(along the beam axis).

The XRD-31 is a fast, windowless X-ray vacuum photodiode developed by EG&G. It is currently the primary fast X-ray detector used to diagnose the X-rays on NIF and OMEGA on the multichannel DANTE spectrometer. The XRD-31 has a dynamic range of less than 1e-12 amps to more than 10 amps. A technique is described to measure the impulse response of the diodes to a 150 fs pulse of 200 nm laser light and a method to calculate the “risetime” for a square pulse and compare it with the computed electron transit time from the photocathode to the anode. Measured response time for 5 XRD-31s assembled in early 2004 was 149.7 ps +-2.75 ps.

The authors search for charmless decays of charged B mesons to the three-body final state K{sub S}{sup 0}K{sub S}{sup 0}{pi}{sup +}. Using a data sample of 423.7 fb{sup -1} collected at the {Upsilon}(4S) resonance with the BABAR detector, corresponding to (465.1 {+-} 5.1) x 10{sup 6} B{bar B} pairs, they find no significant signal and determine a 90% confidence level upper limit on the branching fraction of 5.1 x 10{sup -7}.

Failure occurs when one or more of the intended functions of a product are no longer fulfilled to the customer's satisfaction. The most critical product failures are those that escape design reviews and in-house quality inspection and are found by the customer. The product may work for a while until its performance degrades to an unacceptable level or it may have not worked even before customer took possession of the product. The end results of failures which may lead to unsafe conditions or major losses of the main function are rated high in severity. Failure Modes and Effects Analysis (FMEA) is a tool widely used in the automotive, aerospace, and electronics industries to identify, prioritize, and eliminate known potential failures, problems, and errors from systems under design, before the product is released (Stamatis, 1997). Several industrial FMEA standards such as those published by the Society of Automotive Engineers, US Department of Defense, and the Automotive Industry Action Group employ the Risk Priority Number (RPN) to measure risk and severity of failures. The Risk Priority Number (RPN) is a product of 3 indices: Occurrence (O), Severity (S), and Detection (D). In a traditional FMEA process design engineers typically analyze the 'root …

This annual report provides details on the research conducted at EMSL--the Environmental Molecular Sciences Laboratory in Fiscal Year 2008.

We study effects of energy chirp on echo-enabled harmonic generation (EEHG). Analytical expressions are compared with numerical simulations for both harmonic and bunching factors. We also discuss the EEHG free-electron laser bandwidth increase due to an energy-modulated beam and its pulse length dependence on the electron energy chirp.

We report on the first next-to-leading order QCD computation of W + 3-jet production in hadronic collisions including all partonic subprocesses. We compare the results with CDF data from the Tevatron, and find excellent agreement. The renormalization and factorization scale dependence is reduced substantially compared to leading-order calculations. The required one-loop matrix elements are computed using on-shell methods, implemented in a numerical program, BlackHat. We use the SHERPA package to generate the real-emission contributions and to integrate the various contributions over phase space. We use a leading-color (large-N{sub c}) approximation for the virtual part, which we confirm in W + 1,2-jet production to be valid to within three percent. The present calculation demonstrates the utility of on-shell methods for computing next-to-leading-order corrections to processes important to physics analyses at the Large Hadron Collider.

The authors present a Dalitz-plot analysis of charmless B{sup {+-}} decays to the final state {pi}{sup {+-}}{pi}{sup {+-}}{pi}{sup {-+}} using a sample of (465 {+-} 5) x 10{sup 6} B{bar B} pairs collected by the BABAR experiment at {radical}s = 10.58 GeV. They measure the branching fractions {Beta}(B{sup {+-}} {yields} {pi}{sup {+-}}{pi}{sup {+-}}{pi}{sup {-+}}) = (15.2 {+-} 0.6 {+-} 1.2 {+-} 0.4) x 10{sup -6}, {Beta}(B{sup {+-}} {yields} {rho}{sup 0}(770){pi}{sup {+-}}) = (8.1 {+-} 0.7 {+-} 1.2{sub -1.1}{sup +0.4}) x 10{sup -6}, {Beta}(B{sup {+-}} {yields} f{sub 2}(1270){pi}{sup {+-}}) = (1.57 {+-} 0.42 {+-} 0.16{sub -0.19}{sup +0.53}) x 10{sup -6}, and {Beta}(B{sup {+-}} {yields} {pi}{sup {+-}}{pi}{sup {+-}}{pi}{sup {-+}} nonresonant) = (5.3 {+-} 0.7 {+-} 0.6{sub -0.5}{sup +1.1}) x 10{sup -6}, where the uncertainties are statistical, systematic, and model-dependent, respectively. Measurements of branching fractions for the modes B{sup {+-}} {yields} {rho}{sup 0}(1450){pi}{sup {+-}} and B{sup {+-}} {yields} f{sub 0}(1370){pi}{sup {+-}} are also presented. They observe no significant direct CP asymmetries for the above modes, and there is no evidence for the decays B{sup {+-}} {yields} f{sub 0}(980){pi}{sup {+-}}, B{sup {+-}} {yields} {chi}{sub c0}{pi}{sup {+-}}, or B{sup {+-}} {yields} {chi}{sub c2}{pi}{sup {+-}}.

This multi-investigator project was concerned with the development and application of new methods and computer codes that would allow realistic modeling of nanosystems. Carter's part in this team effort involved two method/algorithm/code development projects during the first 14 months of this grant. Carter's group has been advancing theory and applications of the orbital-free density functional theory (OF-DFT), the only DFT method that exhibits linear scaling for metals. Such a method offers the possibility of simulating large numbers of atoms with quantum mechanics, such that properties of metallic nanostructures (e.g. nanowires of realistic dimensions) could be investigated. In addition, her group has been developing and applying an embedded correlated wavefunction theory for treating localized excited states in condensed matter (including metals). The application of interest here is spin manipulation at the nanoscale, i.e., spintronics, in which local electron excitations interact with the surrounding material. Her embedded correlation method is ideal for studying such problems.

Recent developments in the theory of strong interactions are discussed in the framework of the AdS/CFT duality between string theories of gravity in a higher dimension Anti-de Sitter space and conformal quantum field theories in physical space-time. This novel theoretical approach, combined with 'light-front holography', leads to new insights into the quark and gluon structure of hadrons and a viable first approximation to quantum chromodynamics, the fundamental theory of the strong and nuclear interactions.

The resummation of soft gluon exchange for QCD hard scattering requires a matrix of anomalous dimensions, which has been computed through two loops. The two-loop matrix is proportional to the one-loop matrix. Recently there have been proposals that this proportionality extends to higher loops. One can test such proposals by computing the dependence of this matrix on the matter content in a generic gauge theory. It is shown that for the matter-dependent part the proportionality extends to three loops for arbitrary massless processes.

It is a challenge to generate full charge electrons from the electron sources without compromising polarization for the proposed ILC and CLIC. It is essential to advance polarized photocathodes to meet the requirements. SLAC has worldwide unique dedicated test facilities, Cathode Test System and dc-Gun Test Laboratory, to fully characterize polarized photocathodes. Recent systematic measurements on a strained-well InAlGaAs/AlGaAs cathode at the facilities show that 87% polarization and 0.3% QE are achieved. The QE can be increased to {approx}1.0% with atomic hydrogen cleaning. The surface charge limit at a very low current intensity and the clear dependence of the polarization on the surface charge limit are observed for the first time. On-going programs to develop photocathodes for the ILC and CLIC are briefly introduced.

An evaluation of a large number of air sample filters was undertaken using a commercial alpha and beta spectroscopy system employing a passive implanted planar silicon (PIPS) detector. Samples were only measured after air flow through the filters had ceased. Use of a commercial radon stripping algorithm was implemented to discriminate anthropogenic alpha and beta activity on the filters from the radon progeny. When uncontaminated air filters were evaluated, the results showed that there was a time-dependent bias in both average estimates and measurement dispersion with the relative bias being small compared to the dispersion. By also measuring environmental air sample filters simultaneously with electroplated alpha and beta sources, use of the radon stripping algorithm demonstrated a number of substantial unexpected deviations. Use of the current algorithm is therefore not recommended for assay applications and so use of the PIPS detector should only be utilized for gross counting without appropriate modifications to the curve fitting algorithm. As a screening method, the radon stripping algorithm might be expected to see elevated alpha and beta activities on air sample filters (not due to radon progeny) around the 200 dpm level.

Isotope effects (IEs) are a powerful tool for examining the reactivity of, and interactions between, molecules. Recently, secondary IEs have been used to probe the nature of noncovalent interactions between guest and host molecules in supramolecular systems. While these studies can provide valuable insight into the specific interactions governing guest recognition and binding properties, IEs on noncovalent interactions are often very small and difficult to measure precisely. The Perrin group has developed an NMR titration method capable of determining ratios of equilibrium constants with remarkable precision. They have used this technique to study small, secondary equilibrium isotope effects (EIEs) on the acidity of carboxylic acids and phenols and on the basicity of amines, measuring differences down to thousandths of a pK{sub a} unit. It occurred to us that this titration method can in principle measure relative equilibrium constants for any process which is fast on the NMR timescale and for which the species under comparison are distinguishable by NMR. Here we report the application of this method to measure very small EIEs on noncovalent host-guest interactions in a supramolecular system.

An updated deterministic version of the Techa River Dosimetry System (TRDS-2009D) has been developed to estimate individual doses from external exposure and intake of radionuclides for residents living on the Techa River contaminated as a result of radioactive releases from the Mayak plutonium facility in 1949–1956. The TRDS-2009D is designed as a flexible system that uses, depending on the input data for an individual, various elements of system databases to provide the dosimetric variables requested by the user. Several phases are included in the computation schedule. The first phase includes calculations with use of a common protocol for all cohort members based on village-average-intake functions and external dose rates; individual data on age, gender and history of residence are included in the first phase. This phase results in dose estimates similar to those obtained with system TRDS-2000 used previously to derive risks of health effects in the Techa River Cohort. The second phase includes refinement of individual internal doses for those persons who have had body-burden measurements or exposure parameters specific to the household where he/she lived on the Techa River. The third phase includes summation of individual doses from environmental exposure and from radiological examinations. The results of TRDS-2009D …

The IAEA Nuclear Data Section convened the 18th meeting of the International Network of Nuclear Structure and Decay Data Evaluators at the IAEA Headquarters, Vienna, 23 to 27 March 2009. This meeting was attended by 22 scientists from 14 Member States, plus IAEA staff, concerned with the compilation, evaluation and dissemination of nuclear structure and decay data. A summary of the meeting, recommendations/conclusions, data centre reports, and various proposals considered, modified and agreed by the participants are contained within this document. The International Network of Nuclear Structure and Decay Data (NSDD) Evaluators holds biennial meetings under the auspices of the IAEA, and consists of evaluation groups and data service centres in several countries. This network has the objective of providing up-to-date nuclear structure and decay data for all known nuclides by evaluating all existing experimental data. Data resulting from this international evaluation collaboration is included in the Evaluated Nuclear Structure Data File (ENSDF) and published in the journals Nuclear Physics A and Nuclear Data Sheets (NDS).

A system for collecting solid, post-explosion debris samples from the NIF chamber and their subsequent radiochemical analysis is currently under development. If the debris that condenses out of the plasma can be collected and analyzed, the number and type of nuclear reactions that occurred in the capsule material can be determined. this has applications both for radiochemical diagnostics of NIF capsule performance as well as radiochemical measurements relevant to basic science and stockpile stewardship. Several design prototypes have been studied and a prioritized list of radiochemical measurements that could be performed on NIF is under development based on interactions with capsule design, fabrication, and WCI design divisions.

We have been developing a high throughput 454 library construction process at the Joint Genome Institute to meet the needs of de novo sequencing a large number of microbial and eukaryote genomes, EST, and metagenome projects. We have been focusing efforts in three areas: (1) modifying the current process to allow the construction of 454 standard libraries on a 96-well format; (2) developing a robotic platform to perform the 454 library construction; and (3) designing molecular barcodes to allow pooling and sorting of many different samples. In the development of a high throughput process to scale up the number of libraries by adapting the process to a 96-well plate format, the key process change involves the replacement of gel electrophoresis for size selection with Solid Phase Reversible Immobilization (SPRI) beads. Although the standard deviation of the insert sizes increases, the overall quality sequence and distribution of the reads in the genome has not changed. The manual process of constructing 454 shotgun libraries on 96-well plates is a time-consuming, labor-intensive, and ergonomically hazardous process; we have been experimenting to program a BioMek robot to perform the library construction. This will not only enable library construction to be completed in a single …

We propose undertaking a demonstration experiment on suppressing spontaneous undulator radiation from an electron beam at BNL's Accelerator Test Facility (ATF). We describe the method, the proposed layout, and a possible schedule. There are several advantages in strongly suppressing shot noise in the electron beam, and the corresponding spontaneous radiation. The self-amplified spontaneous (SASE) emission originating from shot noise in the electron beam is the main source of noise in high-gain FEL amplifiers. It may negatively affect several HG FEL applications ranging from single- to multi-stage HGHG FELs. SASE saturation also imposes a fundamental hard limit on the gain of an FEL amplifier in a coherent electron-cooling scheme. A novel active method for suppressing shot noise in relativistic electron beams by many orders-of-magnitude was recently proposed. While theoretically such strong suppression appears feasible, the performance and applicability of this novel method must be evaluated experimentally. Several practical questions about the proposed noise suppressor, such as 3D effects and/or sensitivity to the e-beam parameters also require experimental clarification. To do this, we propose here a proof-of-principle experiment using elements of the VISA FEL at BNL's Accelerator Test Facility.

Magnetization reversal in patterned ferromagnetic nanowires usually occurs via domain wall (DW) nucleation and propagation from one end (or both ends) of the wire which can be significantly reduced by a large, magnetically soft pad on one of the wire ends. These 'nucleation pads' reverse at lower fields than an isolated nanowire and introduce a DW to the wire from the wire end attached to the pad. Once a critical 'injection' field is reached, the DW sweeps through the wire, reversing its magnetization. Nucleation pads are frequently used as part of nanowire devices and experimental structures. Magnetic-field-driven shift register memory can include an injection pad to write data while those attached to nanowire spiral turn sensors act as both a source and sink of domain walls. Both of these devices use two-dimensional wire circuits and therefore require the use of orthogonal in-plane magnetic fields to drive domain walls through wires of different orientations. These bi-axial fields can significantly alter the fields at which DW injection occurs and control the number of different injection modes. We have used magnetic transmission soft X-ray microscopy (M-TXM) [6] providing 25nm spatial resolution to image the evolution of magnetization configurations in patterned 24nm thick Ni{sub …

Pacific Northwest National Laboratory (PNNL) was tasked by Bechtel National Inc. (BNI) on the River Protection Project, Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to conduct testing to demonstrate the performance of the WTP Pretreatment Facility (PTF) leaching and ultrafiltration processes at an engineering-scale. In addition to the demonstration, the testing was to address specific technical issues identified in Issue Response Plan for Implementation of External Flowsheet Review Team (EFRT) Recommendations - M12, Undemonstrated Leaching Processes.( ) Testing was conducted in a 1/4.5-scale mock-up of the PTF ultrafiltration system, the Pretreatment Engineering Platform (PEP). Parallel laboratory testing was conducted in various PNNL laboratories to allow direct comparison of process performance at an engineering-scale and a laboratory-scale. This report presents and discusses the results of those tests.

The nature of plasma equilibrium in a magnetic field with stochastic regions is examined. It is shown that the magnetic differential equation that determines the equilibrium Pfirsch-Schluter currents can be cast in a form similar to various nonlinear equations for a turbulent plasma, allowing application of the mathematical methods of statistical turbulence theory. An analytically tractable model, previously studied in the context of resonance-broadening theory, is applied with particular attention paid to the periodicity constraints required in toroidal configurations. It is shown that even a very weak radial diffusion of the magnetic field lines can have a significant effect on the equilibrium in the neighborhood of the rational surfaces, strongly modifying the near-resonant Pfirsch-Schluter currents. Implications for the numerical calculation of 3D equilibria are discussed