Report issued by the University of California Lawrence Radiation Laboratory discussing a method of updating library circulation records on an IBM 1401 computer. The report describes the methods of generating and updating the records using transaction cards to create computer tapes that are sorted and updated to prepare current reports of circulation information.

Abstract: An automatic recording mass spectrometer has been designed; two instruments have been constructed and have operated reliably for more than seven years as process monitors.

From summary: "Experiments to determine effectiveness of additives to reduce radiolytic damage to a mixture of isometric terphenyls in which 93 separate compounds were evaluated."

The experimental program described has had as its objective the determination of the pressure exerted by free fission gas in operating UO2-filled reactor fuel elements.

Abstract: This technical report covers the investigation of 17-4 PH steel components used in the SM-1, SM-1A and PM-2A nuclear power plants, which consist of control rod drive racks, pinions, seal shafts and associated parts. Evidence supporting the continued use of 17-4 PH steel in these applications is presented. Alco's current procurement and processing specifications for 17-4 PH steel are included. The evidence presented is in the form of stress calculations, test and environmental data and the results of non-destructive and destructive metallographic analyses.

The equilibrium and maximum override values for xenon and samarium poisoning have been computed using the recently issued effective cross sections of C. H. Westcott. Values are given as a function of specific power, neutron temperature, and epithermal flux content.

The general expression for the angular correlation between radiations produced in successive cascade transitions is derived by use of Racah algebra. The result is then specialized to the beta - gamma correlation and applied to two cases in which additional properties of the photon are specified, the circular polarization and the plane polarization. The prospect of testing time reversal and determining nuclear matrix element ratios by beta - gamma correlation measurements is explored using the nuclide Tm/sup 170/ as an example. The directional angular correlation between the 2.31-Mev beta and the subsequent 0.605-Mev gamma emitted in the decay of Sb/sup 124/ was measured as a function of the beta energy. The K-conversion coefficient of the 279-kev gamma following beta decay of Hg/sup 203/ was measured by comparing the x-ray and gamma intensities in a scintillation spectrometer. The measured valve of alpha /sub k/ = 0.195 plus or minus 0.014 indicates that the transition is M1 with E2 mixed to the extent of 63%. The angular correlation of the 107-1.24 Mev gamma cascade in Zn/sup 68/ following the decay of 68-min Ga/sup 68/ is shown. The Legendre polynomial expansion coefficients were deter-gular correlation in the decay of Sb/ sup 118/ was …

An inventory of the contaminated materials accumulated since the initiation of this project in June 1958, revealed a larger variety and quantity of materials that could be burned, than was specified for the initial scope. Therefore, it is desirable to revise the scope to permit handling the majority of these materials with the initially installed equipment.

This procedure is intended to be used as: 1. An instruction and guide for operation of the KER loops. 2. To aid in familiarization and understanding of the general operation of the loops. 3. To prevent lost time due to errors in loop operation. The procedure is not meant to be completely comprehensive in all details of loop operation.

By radiation dosimetry, we will mean the determination of the energy deposited per unit mass of irradiated material by ionizing radiation. Usually the material of interest in tissue and the results are to be applied to a radiobiological experiment, a radiotherapy treatment, or the protection of personnel from radiation hazards. The same methods, however, are applied to such engineering problems as the production of heat by reactor radiations, the use of radiation in chemical reactions or food processing, etc.

From Introduction: "The high frequency response remains important even when pulse shaping is introduced. Pulse shaping is used to improve the time resolution of the system, to minimize overload distortion, or to facilitate the action of discriminating and recording circuits. The amplifier response may be optimized by such shaping, but in general the overall characteristics will be fixed by the particular detector system."

One-dimensional mean-section flow and blade specific losses proportional to average specific kinetic energy are assumed in the analysis. Range of the work-speed parameter lambda considered includes low to moderate blade speeds with high specific work outputs, where critical turbojet, turbopump, and accessory-drive turbines are encountered. A diffusion factor of 0.5 limits the loading on the downstream stators. Turbine efficiences considered are total or aerodynamic, rating, and static. Efficiences of velocity-diagram types at impulse and that corresponding to values of maximum efficiency are presented and compared to indicate in what range of lambda downstream stators are beneficial as well as the attending improvements in efficiency.

At the request of the Alloy Preparation Group, the Nondestructive Test Development Group investigated the feasibility of determining the clad thickness on Mark X MTR Fuel Plates. As the use of induced eddy-currents was considered to be the most promising approach, a prototype instrument and probe coil utilizing this principle was developed to measure clad thickness. The results of the investigation conducted with this instrument indicate that the clad thickness of this type of fuel plats can be measured to withing +- 0.001 in.

Report presenting an experimental investigation on a single turbojet engine combustor and on a turbojet engine using a fuel mixture of 70 percent trimethyl borate and 30 percent methyl alcohol. Results regarding the single combustor's deposition, combustion efficiency, ignition, temperature distribution, pressure drop and the engine operation are provided.

Report presenting static tests on the compatibility of gaseous fluorine with various liquids, solid plastics, waxes, and greases at pressures of 0 and 1500 pounds per square inch gage and atmospheric temperature. Several materials were found to be compatible at atmospheric pressure, but only Teflon and ruby were compatible under static conditions at 1500 pounds per square inch gage.

Static tests on the compatibility of fluorine with non-metals at atmospheric temperature eliminated many materials from further consideration for use in fluorine systems. Several materials were found compatible at atmospheric pressures. Only Teflon and ruby (aluminum oxide) were compatible at 1500 pounds per square inch gage.

Abstract: The Trans-Pecos region of southwest Texas is noted for the production of quicksilver, lead, silver, and copper from its several mining districts. Reconnaissance, which was concentrated in and around these districts, revealed many areas of slightly abnormal radioactivity. Only a few areas, however, showed uranium mineralization.

Experiments are described which show that the velocity of compressional waves along a thin plate varies as a function of the frequency of the waves. In terms of transit times in aluminum the value is between 4.02 and 4.94 microseconds per inch.

"An investigation of the isothermal wake-flow characteristics of several flame-holder shapes was carried out in a 4- by 4-inch flow chamber. The effects of flame-holder-shape changes on the characteristics of the Karman vortices and thus on the recirculation zones to which experimenters have related the combustion process were obtained for several flame holders. The results may furnish a basis of correlation, of combustion efficiency and stability for similarly shaped flame holders in combustion studies" (p. 1).

Technical reports outlining the controls for the Homogeneous Reactor Experiment (HRE); controls are divided into three principal groups. 1. Reactor. 2. Process or auxiliary. 3. Power generation. These are the classifications designating the primary functions of the controls. [From Introduction]

Memorandum presenting a brief method for estimating the speed response of turbojet and turbine-propeller engines to a step change in fuel flow. The method approximates the dynamic equilibrium in the gas-turbine engine with a first-order linear differential equation, the time constant of which varies inversely with the equilibrium speed. Engine time constants computed by means of this method are compared with time-constant data obtained by direct measurement of transient on three turbojet engines and two turbine-propeller engines.

Discussing an examination made of Green Vein Mesa in the southwestern part o he San Rafael Swell in Utah to determine the extent of uranium mineralization.

"An investigation was made in the Langley 300 MPH 7- by 10-foot tunnel to determine the aerodynamic characteristics of a flying-boat hull of a length-beam ratio of 15 in the presence of a wing. The investigation was an extension of previous tests made on hulls of length-beam ratios of 6, 9, and 12; these hulls were designed to have approximately the same hydrodynamic performance with respect to spray and resistance characteristics. Comparison with the previous investigation at lower length-beam ratios indicated a reduction in minimum drag coefficients of 0.0006 (10 percent) with fixed transition when the length-beam ratio was extended from 12 to 15" (p. 1).

Technical report outlining cavity-type ionization chambers with graphite walls that are used to measure heat dissipation in the graphite reflector of the MTR mock-up. Studies the relationship between the ionization occurring in the chamber and the heat generated in the surrounding graphite medium. [From Abstract]