The proposed increased water capacity for 100-K plants will increase the electrical load to be supplied. The load study showed that the capacity of the existing 13.8 kV system is adequate to carry the increased loads proposed for Project CG-775, while for the 5 kV system, an expanded power system is proposed. Likewise, the voltage regulation on the kV system bus will be excessive, and voltage regulators should be added.

In order to provide advance direction for 333 Building equipment development work, a survey of potential areas of significant savings through equipment improvement has been made. The purpose of this report is only to indicate areas for investigation, not to define a program. Equipment is adequate to maintain operating continuity and provide for safe operation of the building. Special attention should be given to ``one-of-a-kind`` pieces of equipment. These include the press, cutoff saw, beta heat treat facility and autoradiograph film developer. Manpower savings will result principally from refinement of each operation. There are no really outstanding areas for improvement. The greatest potential for savings is in material costs. These are illustrated in Tables I&IV. Maintenance costs provide for possible significant reductions at braze, vacu-blast, nondestructive test, autoclaves, and chemical processing equipment.

This report is a bibliography about ABM.

Maintenance of poiarization of polarized protons in a linear accelerator is known to be feasible. Circular accelerators present a different problem, and the investigation of the interaction of orbit dynamics and particle polarization in general is undertaken. The equation of motion of the spin vector of a charged particle in a magnetic field as formulated by Bargman, Michel, and Telegdi is utilized in the study of depolarization for several accelerators. High values of depoiarization are obtained, and means for avoiding such depolarization are suggested. (D.C.W.)

Maintenance of polarization of polarized protons in a linear accelerator is known to be feasible. Circular accelerators present a different problem, and the investigation of the interaction of orbit dynamics and particle polarization in general is undertaken. The equation of motion of the spin vector of a charged particle in a magnetic field as formulated by Bargmann, Michel, and Telegdi is utilized in the study of depolarization for several accelerators. High values of depolarization are obtained, and means for avoiding such depolarization are suggested. (D.C.W.)

This document outlines the Westinghouse Astronuclear Laboratory (WANL) specification and procedures for acceptance testing of accelerometers. All accelerometers that are to be used for reactor instrumentation shall meet the requirements of this specifications before being accepted.

The three alterations discussed in this report have an effect on the parameters used in Total Control Calculations for C Reactor: Conversion to smaller diameter and shorter vertical safety rods in six outer control channels; installation of forty-four overbored tubes with short fuel charges in the flat zone and an associated increase in spike enrichment; and centralization of the enrichment ring into a three-lattice unit width in place of three and one-half lattice units previously in use. New parameters are derived in this document for future total control calculations.

As a result of atomic shelter tests and field experiments condueted over the past nine years, it has been conclusively shown that shelters provide the only promising means of civilian protection in the event of a nuclear war. Design details are presented for a group shelter to accommodate 100 persons of all age groups and both sexes. The shelter structure is a multiplate corrugated- steel arch set on a concrete slab with end walls of bridge plate sheathing. The entire structure is covered with a minimum of 3 feet of earth. The shelter combines outstanding protection against radioactive fall-out with good protection against blast and thermal radiation. Drawings are included. General operating procedures are outlined. (C.H.)

This report talks about the Aerospace Nuclear Safety

This document reports the result of an engineering analysis and evaluation of the Zone Temperature Monitoring System. The main function of the system is to protect the reactor from localized increases in reactor power which would be reflected by increases in the tube outlet temperatures in the affected zones of the reactor. This function has been implemented by the installation of immersion temperature detectors on 109 representative process tubes. The signals from the detectors will be monitored and will automatically annunciate, initiate a power setback, or initiate a reactor scram should the outlet temperature of one, two, or three tubes exceed an adjustable, preset limit.

None

Annual report submitted by the Boy Scouts of America to Congress describing highlights from 1961, activities, public relations, finance, organizational leadership, and other information about scouting programs.

This report is categorized into six categories: (I) The administrative's Crime Program, (II)General Crime Control Legislation,(III) Legislation Relating to Organized Crime Control, (IV) Legislation Relating to Law Enforcement Officers, (V) Legislation Relating to Riots and Civil Disobedience and (VI) Legislation Relating to Crime Control in the District of Columbia.

An apparatus to study rare-gas fission-product release from nuclear fuel materials during postirradiation heating was developed. Xenon and krypton fission gases escaping from a small specimen during heating at constant temperature are measured using a continuous radioactivity monitor and charcoal adsorption traps. The rhodium-wound furnace is capable of operation at 1600 deg C. Helium carrier gas is purified by activated alumina, copper, and zirconium traps, and the oxygen and moisture contents of the gas are monitored continuously. The operating procedure and data are presented for a typical heating experiment in which fused uranium dioxide was studied. (auth)

Report documenting the progress of the Army Gas-Cooled Reactor Systems Program to develop a mobile nuclear power plant for military field operation.

Attachment of Microdot Weldable Strain Gages requires that joints be produced between the welding flange of the gage and the structural part being evaluated.

Available pressure data on the B and D downcomers and approach piping is tabulated herein. All readings were taken with an air bubbler system; readings given in psi were taken on a Bourdon-type pressure-vacuum gauge, readings given in inches of water were read on an oil-filled manometer. In each case, fluctuations occurred and the mean value was estimated by eye. Data are presented as a function of flow rate and temperature.

The pile power level curve, which includes data from PT 528 High Tank Drawdown Test and heat decay test, represents allowable power level for a given average High Tank temperature.

The problem of separation of beams of particles of different masses but of the same momentum at Bev energies is the subject of a great deal of study at several high energy laboratories. In this note we shall describe the problem and tabulate a few of the cogent parameters. Frequently the student of high energy interactions is faced with a beam of miscellaneous particles coming from an accelerator. By standard techniques this beam can be rendered approximately parallel and an inch or so in diameter. By passage through a magnetic field the beam can be analyzed in momentum. Now it frequently happens that the particles in which the experimenter is particularly interested make up only a small fraction of the beam and the exigencies of the proposed experiment may well demand that the background of undesired particles be drastically reduced. The problem is difficult because the velocities of the various particles are almost equal to each other and to the velocity of lights; this makes time-of-flight techniques relatively ineffective. The energies of the particles are almost equal so electrostatic separation also is difficult. Since the beam is already analyzed in momentum, further separation by magnetic means is impossible.

This report presents the gravity data of drill hole Ue19n at the Nevada Test Site.

A calculation of tritium beta energy absorption in spherical bulbs filled with mixtures of tritium and other gases is ' carried out under the empirically substantiated assumption that the energy absorption per spherical shell surrounding a point tritium source is representable by a pure exponential function. Primary and successive backscattering at the wall of the vessel is taken into account by means of a very approximate calculation. The computed energy absorption function for hydrogen gas in a silvered bulb agrees within plus or minus 3% over a wide range of gas pressure with the one available set of spherical ionization chamber data. (auth)

This study is a comprehensive survey on the literature that outlines the duties of Congressmen and Congressional staff as it relates to casework.

None

This report, from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; and employee relations.