Abstract: "The mechanical properties and corrosion resistance of induction-melted, zirconium-tin alloys have been determined. The alloys investigated contained from zero to five per cent tin and up to 0.3% carbon. The zirconium used was United States Bureau of Mines sponge zirconium. The mechanical properties investigated include the tensile, hot-hardness, and impact properties."

Report detailing various Bremsstrahlung theories since 1945. Citations for different theories are included.

Quarterly report describing progress on unclassified research programs funded by the U.S. Atomic Energy Commission during the first quarter of the 1966 fiscal year.

Report of experimentation on mice of exposure to daily doses of gamma radiation at two rates and the resultant damage.

Report presenting an investigation to determine which of two ceramic coatings, L-7C and A-417, developed by the National Bureau of Standards is more suitable as a protective coating for turbine blades in a turbojet engine. Four cast Vitallium turbine blades, two coated with each of the ceramics, were installed in a turbine wheel of a turbojet engine and subjected to accelerated cyclic life tests.

Report presenting an analytical and experimental evaluation of diborane as a ram-jet fuel, which seems to offer greater flight range, thrust, and combustion stability beyond what is attainable with petroleum fuels. Results regarding ideal thrust, stability, deposits, and flight range with several blends of diborane are provided.

From Summary: "A procedure is presented for determining boundary-layer quantities from pressure-rake data, which include the combined effects of viscous and shock losses. The problem is analyzed using schileren photographs of the shock configuration, the continuity of mass relationship, and the characteristic of the turbulent boundary layer that its outer edge is defined by a rapid change in slope in the Mach number profiles in the vicinity of the edge."

The Weissinger method for determining additional span loading for incompressible flow is used to find the damping in roll, the lateral center of pressure of the rolling for wing plan forms of various aspect ratios, taper ratios, and sweep angles. In addition, the applicability of the method to the determination of certain other aerodynamic derivatives is investigated, and corrections for the first-order effects of compressibility are indicated. The agreement obtained between experimentally and theoretically determined values for the aerodynamic coefficients indicates that the method of Weissinger is well suited to the calculation of such resulting aerodynamic derivatives of wings as do not involve considerations of tip suction.

From Introduction: "The present paper is restricted to a discussion of wing theory subject to the assumptions of linearized compressible flow. It therefore employs solutions of Laplace's equation and the wave equation for cases where the boundary condition are specified in the plane of the wing."

A simplified lifting-surface theory that includes effects of compressibility and spanwise variation of section lift-curve slope is used to provide charts with which antisymmetric loading due to arbitrary antisymmetric angle of attack can be found for wings having symmetric plan forms with a constant spanwise sweep angle of the quarter-chord line. Consideration is given to the flexible wing in roll. Aerodynamic characteristics due to rolling, deflected ailerons, and sideslip of wings with dihedral are considered. Solutions are presented for straight-tapered wings for a range of swept plan forms.

An anion exchange precipitation procedure was developed for the determination of Cs¹³⁷ in various aged fission product waste solutions, and other solutions containing Cs¹³⁷. The procedure is based on the ability of an anion exchange column to function simultaneously at an anion exchanger and as a precipitating agent (1).

Laboratory studies have shown that the double salt, CaF2-PuF4, can be precipitated by rapid addition of hydro-fluoric acid to solutions containing 25 to 75 g Pu/1, caleium equimolar to plutonium, and 1 to 10 M HNO3. The precipitate, which is subsequently washed with water and dried to 300 degrees C in dehumidified, deoxygenated argon, can be reduced thermally by calcium to give high yields of plutonium metal.

This is a summarizing and reviewing report in which almost all the experimental data representing Project work done prior to 1949 on the corrosion of pure uranium are brought together and analyzed. New data obtained in this laboratory on corrosion rates in laboratory atmosphere and on the identification of corrosion products by electron diffraction are included. The data for corrosion in each of several different media have been plotted according to logarithm-of-the-rate versus reciprocal-temperature coordinates; and from these plots values for the energies and entropies of activation of the corrosion reactions have been obtained. By theoretical treatment of the role of oxygen as a negative catalyst, it is shown that this element may be expected to "poison" the corrosion rection and then act as a corrosion inhibitor. A practical significance of these data analyses is that they explain why machined uranium parts stored in inert atmospheres (helium or argon) containing only very small amounts of water vapor will corrode relatively rapidly with the formation of loose powdery oxide, whereas similar parts may be kept in dry air almost indefinitely with formation on their surface of only a discoloring, but adhered, oxide coating.

Report containing ongoing projects and experiments undertaken by the Oak Ridge National Laboratory's Molten-Salt Reactor Program.

The performance of the 11-stage axial-flow compressor, modified to improve the compressor-outlet velocity, in a revised X24C-4B turbojet engine is presented and compared with the performance of the compressor in the original engine. Performance data were obtained from an investigation of the revised engine in the MACA Cleveland altitude wind tunnel. Compressor performance data were obtained for engine operation with four exhaust nozzles of different outlet area at simulated altitudes from 15,OOO to 45,000 feet, simulated flight Mach numbers from 0.24 to 1.07, and engine speeds from 4000 to 12,500 rpm. The data cover a range of corrected engine speeds from 4100 to 13,500 rpm, which correspond to compressor Mach numbers from 0.30 to 1.00.

Tests have been conducted to determine the drive-motor torque and the static force and moment characteristics of the AN/SPS-1 radar antenna. Shifting the longitudinal position of the antenna had very little effect on the drive-motor torque, which reached a maximum value expressed in terms of dynamic pressure (T/q)(sub max) of 1.15 at an azimuth angle of 245. The maximum observed values of rolling, pitching, and yawing moments in terms of dynamic pressure are -29.0, 66.6, and 13.4, respectively.

Report presenting an experimental investigation on a ramjet in the 20-inch supersonic tunnel at a Mach number of 1.92 to determine the effects of combustion on the performance of a basic normal-shock diffuser. Total-pressure recovery with and without combustion was evaluated as a function of outlet-inlet area ratio and fuel flow. A rapid decrease in peak total-pressure recovery was obtained with increasing outlet-inlet area ratio.

The investigation presented in this report was conducted for the purpose of determining the distribution and magnitude of water pressures likely to be experienced on seaplane hulls in service. It consisted of the development and construction of apparatus for recording water pressures lasting one one-hundredth second or longer and of flight tests to determine the water pressures on a UO-1 seaplane float under various conditions of taxiing, taking off, and landing. The apparatus developed was found to operate with satisfactory accuracy and is suitable for flight tests on other seaplanes. The tests on the UO-1 showed that maximum pressures of about 6.5 pounds per square inch occur at the step for the full width of the float bottom. Proceeding forward from the step the maximum pressures decrease in magnitude uniformly toward the bow, and the region of highest pressures narrows toward the keel. Immediately abaft the step the maximum pressures are very small, but increase in magnitude toward the stern and there once reached a value of about 5 pounds per square inch. (author).

An investigation of a 1/18-scale dynamically similar model of the North American B-45 airplane was made to observe the ditching behavior and determine the proper landing technique to be used in an emergency water landing. Various conditions of damage were simulated to determine the behavior which probably would occur in a full-scale ditching. The behavior of the model was determined from high-speed motion-picture records, time-history acceleration records, and visual observations. It was concluded that the airplane should be ditched at the maximum nose-high attitude with the landing flaps full down for minimum landing speed. During the ditching, the nose-wheel and bomb-bay doors probably will be torn away and the rear of the fuselage flooded. A violent dive will very likely occur. Longitudinal decelerations of approximately 5g and vertical accelerations of approximately -6g (including gravity) will be experienced near the pilots' compartment. Ditching braces installed in the bomb bay will tend to improve the behavior slightly but will be torn away along with the bomb-bay doors. A hydroflap installed ahead of the nose-wheel doors will eliminate the dive and failure of the nose-wheel doors, and substantially reduce the motions and accelerations.

Abstract. Chemical analytical studies of graphite raw materials have revealed new sources of petroleum cokes and pitches of greater purity than those previously used in the manufacture of project graphite. The use of these raw materials of exceptional purity has resulted in an improvement in k of the order of one per cent as compared with the AGOT-AGNT graphite typical of the previous production. A study of the graphitizing process has shown that no dangerous impurities are introduced in the graphite in manufacture; rather, the process actually purifies. furthermore, impurities are distributed homogeneously within the furnace charge; thus the AGOT-AGNT distinction is no longer necessary. A comparison of the methods of graphite testing has demonstrated excellent correlations between chemical analytical data, the results of the function test at Argonne, and the sigma pile experiments. It may therefore be inferred that chemical testing should be an adequate control of the graphite purity. Methods are described for the analysis of ash, B, V, TI, FE, and Ca in petroleum coke, pitch, and graphite.