The following report describes an experiment on the aluminum nitrate process for the conversion of tuballoy tetrafluoride to tuballoy peroxide and the solutions resulting.

Abstract: "The study of ten P.I.G. geometries with copper electrodes and d.c. voltage indicates that from a pressure of 0.1 to about 3.0 microns, depending upon the gage, there is a consistent change in the air pressure-current characteristics of a P.I.G. as the geometry and voltage are changed. At higher pressures discontinuities appear in the gage current and prohibit its use as a pressure gage. In all useful geometries, the greater the applied voltage above 1000 volts, the shorter the useful portion of the pressure-current curve became. Below 1000 volts the curve tended to be unstable. With other conditions constant, the pressure limit increased as the cathode separation decreased and as the anode diameter increased. The empirical equation for the current in certain Philips Ion Gages at certain pressures and voltages is I = a'Pe-p/b where I is the current, P the pressure, e the Naperian base and a' and b constants and dependent upon geometry and voltage."

Report discussing various procedures for recovering tuballoy from tuballoy tetrafluoride, also called "green salt." Results from trial runs of each procedure are presented.

Abstract. Spectrographic procedures for determining small amounts of the common contaminants in beryllium and its compounds are described. Suggestions relative to the preparation of synthetic standards are also given.