Correspondence issued by the Government Accountability Office with an abstract that begins "The fiscal year 2005 Department of Homeland Security (DHS) appropriation set aside $25 million, of the $885 million appropriated for the Urban Areas Security Initiative (UASI), for grants to eligible nonprofit organizations that the Secretary of Homeland Security determined to be at high risk of international terrorist attack. This letter responds to the conference report that directed GAO to review the validity of the threat and risk factors used by DHS to allocate discretionary grants to nonprofit organizations in fiscal years 2003, 2004, and 2005. Based on our review of DHS's risk methodology for fiscal year 2006, the criteria in the fiscal year 2005 grant application kit, and conversations with Congressional staff about the conference report, we addressed the following objectives: (1) DHS's methodology for determining risk for urban areas and the nonprofit grant program, and DHS implementation of the program; (2) states' efforts to implement the nonprofit grant program in fiscal year 2005, and (3) whether subgrants were made to nonprofits in fiscal years 2003 and 2004, when funds were not specifically set aside for nonprofits."

Correspondence issued by the Government Accountability Office with an abstract that begins "The Department of Defense (DOD) expects to purchase about 2,400 Joint Strike Fighter (JSF) aircraft, with potential international sales of 2,000 to 3,500 aircraft. When the number of aircraft engines and spare parts expected to be purchased is considered--along with the lifetime support needed to sustain the engines--the future financial investment will be significant. DOD implemented the JSF alternate engine development program in 1996 to provide competition between two engine manufacturers in an effort to achieve cost savings, improve performance, and gain other benefits. Since then, DOD has invested $1.2 billion in the alternate engine program, and, in August 2005, it awarded a $2.4 billion contract for system development and demonstration of an alternate engine. However, in its fiscal year 2007 budget submission, DOD proposed canceling the alternate engine program. Concerned whether this decision was based on sound analysis, Congress asked us to review DOD's rationale for canceling the program and the analysis supporting it, including the life cycle savings, benefits, and risks assessed."

The main purpose of this report is to document the benchmarking results and verification of the RESRAD-OFFSITE code as part of the quality assurance requirements of the RESRAD development program. This documentation will enable the U.S. Department of Energy (DOE) and its contractors, and the U.S. Nuclear Regulatory Commission (NRC) and its licensees and other stakeholders to use the quality-assured version of the code to perform dose analysis in a risk-informed and technically defensible manner to demonstrate compliance with the NRC's License Termination Rule, Title 10, Part 20, Subpart E, of the Code of Federal Regulations (10 CFR Part 20, Subpart E); DOE's 10 CFR Part 834, Order 5400.5, ''Radiation Protection of the Public and the Environment''; and other Federal and State regulatory requirements as appropriate. The other purpose of this report is to document the differences and similarities between the RESRAD (onsite) and RESRAD-OFFSITE codes so that users (dose analysts and risk assessors) can make a smooth transition from use of the RESRAD (onsite) code to use of the RESRAD-OFFSITE code for performing both onsite and offsite dose analyses. The evolution of the RESRAD-OFFSITE code from the RESRAD (onsite) code is described in Chapter 1 to help the dose …

Hydraulic separators are commonly used for particle size classification and gravity concentration of minerals and coal. Unfortunately, the efficiency of these processes can be quite low due to poor equipment design and variations in feed consistency. To help alleviate these problems, an industry-driven R&D program has been undertaken to develop a new generation of hydraulic separators that are more efficient and less costly to operate and maintain. These units, which are commercially called the CrossFlow separator and HydroFloat separator, have the potential to improve performance (separation efficiency and throughput) and reduce operating costs (power consumption, water and reagent usage). In Phase I of this project, laboratory and pilot-scale test units were evaluated at various industrial sites in both the coal and mineral industries. Based on promising results obtained from Phase I, full-scale prototypes were purchased and installed by a major U.S. phosphate producer and a large eastern U.S. coal company. The test data obtained from these sites demonstrate that significant performance improvements can be realized through the application of these high-efficiency separators.

None

None

None

Photograph of the family grave marker of Dr. Thomas L. Willis, located in the IOOF Cemetery in Denton, TX. It reads: "Thomas L. Willis, M.D., D.D.S., June 27, 1824 - Mar. 31, 1889. Letitia Barnett Hutchison Willis, Dec. 8, 1828 - Jan. 23, 1925. John P. Willis, Nov. 4, 1864 - Nov. 2, 1884."

The axoneme, which forms the core of eukaryotic flagella and cilia, is one of the largest macromolecular machines with a structure that is largely conserved from protists to mammals. Microtubule doublets are structural components of axonemes containing a number of proteins besides tubulin, and are usually found in arrays of nine doublets arranged around two singlet microtubules. Coordinated sliding of adjacent doublets, which involves a host of other proteins in the axoneme, produces periodic beating movements of the axoneme. We have obtained a 3D density map of intact microtubule doublets using cryo-electron tomography and image averaging. Our map, with a resolution of about 3 nm, provides insights into locations of particular proteins within the doublets and the structural features of the doublets that define their mechanical properties. We identify likely candidates for several of these non-tubulin components of the doublets. This work offers novel insight on how tubulin protofilaments and accessory proteins attach together to form the doublets and provides a structural basis for understanding doublet function in axonemes.

None

Single crystalline copper was subjected to quasi-isentropic compression via gas-gun and laser loading at pressures between 18 GPa and 59 GPa. The deformation substructure was analyzed via transmission electron microscopy (TEM). Twins and laths were evident at the highest pressures, and stacking faults and dislocation cells in the intermediate and lowest pressures, respectively. The Preston-Tonks-Wallace (PTW) constitutive description was used to model the slip-twinning process in both cases.

LLNL has successfully fabricated small (1.5 cm{sup 2} area) germanium immersion gratings. We studied the feasibility of producing a large germanium immersion grating by means of single point diamond flycutting. Our baseline design is a 63.4o blaze echelle with a 6 cm beam diameter. Birefringence and refractive index inhomogeneity due to stresses produced by the crystal growth process are of concern. Careful selection of the grating blank and possibly additional annealing to relieve stress will be required. The Large Optics Diamond Turning Machine (LODTM) at LLNL is a good choice for the fabrication. It can handle parts up to 1.5 meter in diameter and 0.5 meter in length and is capable of a surface figure accuracy of better than 28 nm rms. We will describe the machine modifications and the machining process for a large grating. A next generation machine, the Precision Optical Grinder and Lathe (POGAL), currently under development has tighter specifications and could produce large gratings with higher precision.

This work details the stab ignition, small-scale safety, and energy release characteristics of bimetallic Al/Ni(V) and Al/Monel energetic nanolaminate freestanding thin films. The influence of the engineered nanostructural features of the energetic multilayers is correlated with both stab initiation and small-scale energetic materials testing results. Structural parameters of the energetic thin films found to be important include the bi-layer period, total thickness of the film, and presence or absence of aluminum coating layers. In general the most sensitive nanolaminates were those that were relatively thick, possessed fine bi-layer periods, and were not coated. Energetic nanolaminates were tested for their stab sensitivity as freestanding continuous parts and as coarse powders. The stab sensitivity of mock M55 detonators loaded with energetic nanolaminate was found to depend strongly upon both the particle size of the material and the configuration of nanolaminate material, in the detonator cup. In these instances stab ignition was observed with input energies as low as 5 mJ for a coarse powder with an average particle dimension of 400 {micro}m. Selected experiments indicate that the reacting nanolaminate can be used to ignite other energetic materials such as sol-gel nanostructured thermite, and conventional thermite that was either coated onto the multilayer …

The program explored a completely new, economical method of manufacturing nanocrystalline ceramics, Hot Superplastic Powder Forging (HSPF). The goal of the work was the development of nanocrystalline/low porosity optically transparent zirconia/alumina. The high optical transparency should result from lack of grain boundary scattering since grains will be smaller than one tenth the wavelength of light and from elimination of porosity. An important technological potential for this process is manufacturing of envelopes for high-pressure sodium vapor lamps. The technique for fabricating monolithic nanocrystalline material does not begin with powder whose particle diameter is <100 nm as is commonly done. Instead it begins with powder whose particle diameter is on the order of 10-100 microns but contains nanocrystalline crystallites <<100 nm. Spherical particles are quenched from a melt and heat treated to achieve the desired microstructure. Under a moderate pressure within a die or a mold at temperatures of 1100C to 1300C densification is by plastic flow of superplastic particles. A nanocrystalline microstructure results, though some features are greater than 100nm. It was found, for instance, that in the fully dense Al2O3-ZrO2 eutectic specimens that a bicontinuous microstructure exists containing <100 nm ZrO2 particles in a matrix of Al2O3 grains extending over …

The resistance of Alloy 22 (N06022) to localized corrosion, mainly crevice corrosion, has been extensively investigated in the last few years. The effect of influencing variables such as temperature, applied potential, chloride concentration and nitrate inhibitor concentration have been addressed previously. At this time, it was important to address the effect an oxide film or scale that forms during the high temperature annealing process or solution heat treatment (SHT) and its subsequent water quenching. Electrochemical tests such as cyclic potentiodynamic polarization (CPP) have been carried out to determine the repassivation potential for localized corrosion and to assess the mode of attack on the specimens. Tests have been carried out in parallel using mill annealed (MA) specimens free from oxide on the surface. The comparative testing was carried out in six different electrolyte solutions at temperatures ranging from 60 C to 100 C. Results show that the repassivation potential of the specimens containing the black anneal oxide film on the surface was practically the same or higher as the repassivation potential for oxide-free specimens.

Numerical simulations of electron temperature gradient (ETG) turbulence are presented which characterize the ETG fluctuation spectrum, establish limits to the validity of the adiabatic ion model often employed in studying ETG turbulence, and support the tentative conclusion that plasmaoperating regimes exist in which ETG turbulence produces sufficient electron heat transport to be experimentally relevant. We resolve prior controversies regarding simulation techniques and convergence by benchmarking simulations of ETG turbulence from four microturbulence codes, demonstrating agreement on the electron heat flux, correlation functions, fluctuation intensity, and rms flow shear at fixed simulation cross section and resolution in the plane perpendicular to the magnetic field. Excellent convergence of both continuum and particle-in-cell codes with time step and velocity-space resolution is demonstrated, while numerical issues relating to perpendicular (to the magnetic field) simulation dimensions and resolution are discussed. A parameter scan in the magnetic shear, s, demonstrates that the adiabatic ion model is valid at small values of s (s &lt; 0.4 for the parameters used in this scan) but breaks down at higher magnetic shear. A proper treatment employing gyrokinetic ions reveals a steady increase in the electron heat transport with increasing magnetic shear, reaching electron heat transport rates consistent with analyses …

The validity of the Surrogate Ratio method for determining (n,f) cross sections for actinide nuclei is examined. This method relates the ratio of two compound-nucleus reaction cross sections to a ratio of coincidence events from two measurements in which the same compound nuclei are formed via a direct reaction. With certain assumptions, the method allows one of the cross sections to be inferred if the other is known. We develop a nuclear reaction-model simulation to investigate whether the assumptions underlying the Ratio approach are valid and employ these simulations to assess whether the cross sections obtained indirectly by applying a Ratio analysis agree with the expected results. In particular, we simulate Surrogate experiments that allow us to determine fission cross sections for selected actinide nuclei. The nuclei studied, {sup 233}U and {sup 235}U, are very similar to those considered in recent Surrogate experiments. We find that in favorable cases the Ratio method provides useful estimates of the desired cross sections, and we discuss some of the limitations of the approach.

None

The authors describe tools developed by the Computational Nuclear Physics group for testing the quality of internally developed nuclear data and the fidelity of translations from ENDF formatted data to ENDL formatted data used by Livermore. These tests include S{sub n} calculations for the effective k value characterizing critical assemblies and for replacement coefficients of different materials embedded in the Godiva and Jezebel critical assemblies. For those assemblies and replacement materials for which reliable experimental information is available, these calculations provide an integral check on the quality of data. Because members of the ENDF and reactor communities use calculations for these same assemblies in their validation process, a comparison between their results with ENDF formatted data and their results with data translated into the ENDL format provides a strong check on the accuracy of translations. As a first application of the test suite they present a study comparing ENDL 99 and ENDF/B-V. They also consider the quality of the ENDF/B-V translation previously done by the Computational Nuclear Physics group. No significant errors are found.

This report provides a brief overview of illicit methamphetamine (MA) abuse, production, trafficking, the federal methamphetamine-specific programs, and anti-MA legislation introduced in the 109th Congress. MA abuse has implications for public health, child welfare, crime and public safety, border security, and international relations.

None

None

This report summarizes the subsidies that are available for about 25 agricultural commodities representing about one-third of gross farm sales.

None