A list of 491 analytical procedures to directly support waste and environmental analytical work is attached. The list is available from the author as a lotus or excel spreadsheet file.

The ECH system requirements on CIT might be met by microwaves generated by an induction free-electron laser (IFEL). Design studies have assumed that the system is windowless, thus eliminating one of the most highly stressed components of the ECH system. The trade-off for this advantage is that the IFEL is exposed to tritium diffusing from CIT. As reported in the attached appendix, we have investigated the use of cryopumping to control the tritium diffusion to the IFEL. With one to three pumping stations (depending on size) we can reduce the level of tritium in the IFEL to a level that may not pose a breathing hazard after one year of operation. In addition, adding pumping may allow hands-on maintenance after one year. Preliminary indications are that likely accident scenarios will occur slowly enough to permit valves to be closed before the IFEL is significantly contaminated.

The purpose of this acceptance test report was to verify the assembly is correct and complete and meets all the specification and performance requirements. On May 15--16, 1996, the LLW Supercompactor functional demonstrations and performance tests were carried out. These tests were carried out in accordance with the Acceptance Test Procedure, submittal 565, dated 5/3/96. The tests were performed by Herman Miller and Gene Rice of INET Corporation and Richard Lawrence and other PCL personnel. The VIHC representative on May 15, 1996 was Doug Dunlap and on May 16, 1996 the representative was Ken Leist.

Three nonstandard Waste Encapsulation and Storage Facility (WESF) cesium chloride capsules are being shipped from WESF (225B building) to the 324 building. They would normally be shipped in the Beneficial Uses Shipping System (BUSS) cask under its US Department of Energy (DOE) license (DOE 1996), but these capsules are nonstandard: one has a damaged or defective weld in the outer layer of encapsulation, and two have the outer encapsulation removed. The 3 capsules, along with 13 other capsules, will be overpacked in the 324 building to meet the requirements for storage in WESF`s pool.

This report focuses on the design and fabrication of high spectral resolution FTIR (Fourier Transform Infrared) instrumentation for the CART sites of the Atmospheric Radiation Measurement (ARM) Program. The ultimate objective of this grant is to develop three different types of instruments, named the AERI, AERI-X, and SORT. The Atmospheric Emitted Radiance Interferometer (AERI) is the simplest. It will be available for early deployment at the first ARM site and will be deployable at several locations in the extended network to give horizontal coverage. The AERI will be an 0.5 cm{sup {minus}1} resolution instrument, which measures accurately calibrated radiance spectra for radiation studies and for remote sensing of atmospheric state variables. The AERI-X and the SORTI are higher spectral resolution instruments for obtaining the highest practical resolution for spectroscopy at the ARM central sites. The AERI-X, like the AERI will measure atmospheric emitted radiance, but with resolutions as high as 0.1 cm{sup {minus}1}. The Solar Radiance Transmission Interferometer will measure the total transmission of the atmosphere by tracking the sun through changes in atmospheric air mass. The large solar signal makes it practical for this instrument to offer the ultimate in spectral resolution, about 0.002 cm{sup {minus}1}.

This Quality Assurance Program Plan (QAPP) provides an overview of the quality assurance program for Building 327. The program applies to the facility safety structures, systems, and components and to activities that could affect safety structures, systems, and components. Adherence to the quality assurance program ensures the following: US Department of Energy missions and objectives are effectively accomplished; Products and services are safe, reliable, and meet or exceed the requirements and expectations of the user; Hazards to the public, to Hanford Site and facility workers, and to the environment are minimized. The format of this Quality Assurance Program Plan is structured to parallel that of 10 CFR 83 0.120, Quality Assurance Requirements. This Quality Assurance Program Plan (QAPP) provides information on how the Quality Assurance Program is implemented for the 324 Building B-Cell Safety Cleanout Project (BCCP). This QAPP is responsive to the Westinghouse Hanford Company Quality Assurance Program and Implementation Plan, WHC-SP 113 1, for 10 CFR 830.120, Nuclear Safety Management, Quality Assurance Requirements; and DOE Order 5700.6C, Quality Assurance. This QAPP supersedes PNNL PNL-MA-70 QAP Quality Assurance Plan No. WTC-050 Rev. 2, issue date May 3, 1996.

This document summarizes the information on the historical uses, present status, and the sampling and analysis results of waste stored in Tank 241-AP-105. This report supports the requirements of the Tri-Party Agreement Milestone M 44-05.

The purpose of this document is to provide a single referenceable document that provides the X/Qs for the solid waste facilities in the 200 Area, that is to provide the X/Qs for the Solid Waste Dispersal Facilities Master Safety Analysis Report (WHC-SD-WM-MSAR-001, REV. 0, 1996). The X/Qs will be used for the radiological dose estimates in the accident safety analyses. Thus, this document is also to provide the information necessary to perform bounding estimates of the radiological consequences for hypothetical accidents for various solid waste facilities. This document is to examine the variations in the plume dispersion factors associated with the various solid waste facilities. Specifically examined are X/Qs associated with different receptors located in different sectors and at different distances. Examination of one facility included a large area X/Q, while examination of another facility included an elevated release. Generally, the X/Qs are determined for ground releases with and without building wake. In addition, sensitivity of how plume characteristics were affected by using different meteorological data was examined. Each receptor described in this document was evaluated for both 99.5% and 50% meteorological data. Attributes such as plume meander, plume rise, settling and wash-out are not considered in this document.

This Quality Assurance Program Plan (QAPP) provides an overview of the quality assurance program for Building 324. This plan supersedes the PNNL Nuclear Facilities Quality Management System Description, PNL-NF-QMSD, Revision 2, dated March 1996. The program applies to the facility safety structures, systems, and components and to activities that could affect safety structures, systems, and components. Adherence to the quality assurance program ensures the following: US Department of Energy missions and objectives are effectively accomplished; Products and services are safe, reliable, and meet or exceed the requirements and expectations of the user; Hazards to the public, to Hanford Site and facility workers, and to the environment are minimized. The format of this Quality Assurance Program Plan is structured to parallel that of 10 CFR 83 0.120, Quality Assurance Requirements.

A list of 491 analytical procedures to directly support waste and environmental analytical work is attached. The list is available from the author as a lotus or excel spreadsheet file.

This Quality Assurance Program Plan (QAPP) provides information on how the Quality Assurance Program is implemented for the 324 Building B-Cell Safety Cleanout Project (BCCP). This QAPP is responsive to the Westinghouse Hanford Company Quality Assurance Program and Implementation Plan, WHC-SP-1131, for 10 CFR 830.120, Nuclear Safety Management, Quality Assurance Requirements; and DOE Order 5700.6C, Quality Assurance. This QAPP supersedes PNNL PNL-MA-70 QAP Quality Assurance Plan No. WTC-050 Rev. 2, issue date May 3, 1996. This QAPP has been developed specifically for the BCCP. It applies to those items and tasks which affect the completion of activities identified in the work breakdown structure of the Project Management Plan (PMP). These activities include all aspects of decontaminating B-Cell and project related operations within the 324 Building as it relates to the specific activities of this project. General facility activities (i.e. 324 Building Operations) are covered in the Building 324 QAPP. In addition, this QAPP supports the related quality assurance activities addressed in CM-2-14, Hazardous Material Packaging and Shipping, and HSRCM-1, Hanford Site Radiological Control Manual, The 324 Building is currently transitioning from being a Pacific Northwest National Laboratory (PNNL) managed facility to a B and W Hanford Company (BWHC) managed facility. …

The US Department of Energy has established the Tank Waste Remediation System (TWRS) program to safely manage wastes currently stored in underground tank at the Hanford Site. A TWRS testing and development strategy was recently developed to define long-range TWRS testing plans. The testing and development strategy considered four alternatives. The primary variable in the alternatives is the level of pilot-scale testing involving actual waste. This study evaluates the cost benefit and risks associated with the four alternatives. Four types of risk were evaluated: programmatic schedule risk, process mishap risk, worker risk, and public health risk. The structure of this report is as follows: Section 1 introduces the report subject; Section 2 describes the test strategy alternative evaluation; Section 3 describes the approach used in this study to assess risk and cost benefit; Section 4 describes the assessment methodologies for costs and risks; Section 5 describes the bases and assumptions used to estimate the costs and risks; Section 6 presents the detailed costs and risks; and Section 7 describes the results of the cost benefit analysis and presents conclusions.

This report provides a general climatological description of the Savannah River Site. The description provides both regional and local scale climatology. The regional climatology includes a general regional climatic description and presents information on occurrence frequencies of the severe meteorological phenomena that are important considerations in the design and siting of a facility. These phenomena include tornadoes, thunderstorms, hurricanes, and ice/snow storms. Occurrence probabilities given for extreme tornado and non-tornado winds are based on previous site specific studies. Local climatological conditions that are significant with respect to the impact of facility operations on the environment are described using on-site or near-site meteorological data. Summaries of wind speed, wind direction, and atmospheric stability are primarily based on the most recently generated five-year set of data collected from the onsite meteorological tower network (1982--86). Temperature, humidity, and precipitation summaries include data from SRL's standard meteorological instrument shelter and the Augusta National Weather Service office at Bush Field through 1986. A brief description of the onsite meteorological monitoring program is also provided. 24 refs., 15 figs., 22 tabs.

This report the addresses German Military Presence in the United States. The United States has a long history of training with its allies, both here and abroad. Germany first began training its pilots in the United States in 1955.1 The scope of these training programs has grown ever since. Many analysts argue that the most important benefit of an increasing German military presence in the United States may be to enhance opportunities for cooperation at a time when the United States has dramatically reduced its military presence in Europe.

This report focuses on the design and fabrication of high spectral resolution FTIR (Fourier Transform Infrared) instrumentation for the CART sites of the Atmospheric Radiation Measurement (ARM) Program. The ultimate objective of this grant is to develop three different types of instruments, named the AERI, AERI-X, and SORT. The Atmospheric Emitted Radiance Interferometer (AERI) is the simplest. It will be available for early deployment at the first ARM site and will be deployable at several locations in the extended network to give horizontal coverage. The AERI will be an 0.5 cm{sup {minus}1} resolution instrument, which measures accurately calibrated radiance spectra for radiation studies and for remote sensing of atmospheric state variables. The AERI-X and the SORTI are higher spectral resolution instruments for obtaining the highest practical resolution for spectroscopy at the ARM central sites. The AERI-X, like the AERI will measure atmospheric emitted radiance, but with resolutions as high as 0.1 cm{sup {minus}1}. The Solar Radiance Transmission Interferometer will measure the total transmission of the atmosphere by tracking the sun through changes in atmospheric air mass. The large solar signal makes it practical for this instrument to offer the ultimate in spectral resolution, about 0.002 cm{sup {minus}1}.

A small grant was added to an ongoing Navy program to extend the scope of ongoing work by development of a new laser instrument. The instrument, MSCAT (Miniature Scattering and Transmissometry) uses small angle scattering to obtain the needed multi-parameter information for measurement of particle size distribution and number density. During the short course of the grant, the instrument was built and tested in a field experiment off the coast of North Carolina. Useful data were obtained, and these have been presented at the Fall Meeting of the American Geophysical Union in 1994.

Financial statements from Texas Human Rights Foundation, Inc. documenting assets, expenditures, and other financial information for fiscal years 1999 and 1998.

An investigation aimed at devising a procedure for preparing alkyl-or aryl-capped iron sulfide particles continues. An initial attempt to prepare fine-particle, aryl-capped iron sulfides (S-31) involved the competitive reaction of thiophenol (PhSH) and sodium sulfide (Na{sub 2}S) with Fe(II). However, SEM examination of the particles formed by this procedure indicated that no size control had been attained. It was thought that the phenyl group of thiophenol was not bulky enough to prevent thiolate bridging and consequent particle size growth of the metal sulfide. So the bulkier thiol 1-adamantanethiol was synthesized and used in synthesis S-33 in the next attempt to prepare fine-particle, capped iron sulfides.

An investigation aimed at devising a procedure for preparing alkyl-or aryl-capped iron sulfide particles continues. An initial attempt to prepare fine-particle, aryl-capped iron sulfides (S-31) involved the competitive reaction of thiophenol (PhSH) and sodium sulfide (Na{sub 2}S) with Fe(II). However, SEM examination of the particles formed by this procedure indicated that no size control had been attained. It was thought that the phenyl group of thiophenol was not bulky enough to prevent thiolate bridging and consequent particle size growth of the metal sulfide. So the bulkier thiol 1-adamantanethiol was synthesized and used in synthesis S-33 in the next attempt to prepare fine-particle, capped iron sulfides.

With the end of the Cold War, the Strategic Arms Reduction Treaties (START), and other agreements, the United States and Russia have dramatically reduced their arsenals of nuclear weapons. As a result, each side has accumulated large stockpiles of plutonium, one of the principal materials used in nuclear warheads. The United States recently declared a holding of approximately 50 metric tons of weapons-usable plutonium excess to military needs. Even greater levels are believed to exist in Russia.

Optimization of molecular detection efficiencies is important for analytical applications of single molecule detection methods. In microdroplets some experimental limitations can be reduced, primarily because the molecule cannot diffuse away from the excitation and collection volume. Digital molecular detection using a stream of microdroplets has been proposed as a method of reducing concentration detection limits by several orders of magnitude relative to conventional measurements. However, the bending and reflection of light at the microdroplet`s liquid-air interface cause the illumination intensity and fluorescence intensity collected to be strongly dependent on the position of the molecule within the droplet. The goal is to model the detection of single molecules in microdroplets so that one can better understand and optimize detection efficiencies. In the first year of this modeling effort the authors studied the collection of fluorescence from unit-amplitude dipoles inside of spheres. In this second year they modified their analysis to accurately model the effects of excitation inhomogeneities, including effects of molecular saturation, motion of the droplet, and phase variations between the two counter-propagating waves that illuminate the droplet. They showed that counter-propagating plane wave illumination can decrease the variations in the intensity which excites the molecules. Also in this second year …

This revision of the guide provides updated references to project management level Program Management and Assessment Configuration Management activities, and provides working level directions for submitting requirements and project documentation related to the Hanford Tanks Initiative (HTI) project. This includes documents and information created by HTI, as well as non-HTI generated materials submitted to the project.

The purpose of this paper is to describe recent trends CIAC has encountered while working with sites that have been compromised. Frequently, the intruders set up and run Internet Relay Chat (IRC) to exchange information and to show off their success at having compromised a site. Invariably, this protocol consumes bandwidth, uses CPU cycles and is a source of embarrassment for the site. This paper focuses on these negative aspects of IRC and concedes that one can cite numerous examples where IRC is used in a positive manner.

This document presents the results of Acceptance Testing of the 241-C-106 in-tank video camera imaging system. The purpose of this imaging system is to monitor the Project W-320 sluicing of Tank 241-C-106. The objective of acceptance testing of the 241-C-106 video camera system was to verify that all equipment and components function in accordance with procurement specification requirements and original equipment manufacturer`s (OEM) specifications. This document reports the results of the testing.